Engineering:Austral 20 (catamaran)
From HandWiki
Revision as of 07:34, 17 March 2021 by imported>Rtextdoc (correction)
| Development | |
|---|---|
| Designer | Charles Cunningham[1] |
| Location | Australia [1] |
| Year | 1960s[1] |
| Hull | |
| Type | Catamaran[1] |
| Construction | Fiberglass[1] |
| LOA | 6 m (20 ft)[1] |
Austral 20 was a 6 m (20 ft) catamaran produced by Charles Cunningham in Australia in the early 1960s period of experimentation.[1]
It was apparently produced in reasonable numbers by Charles himself.[1]
| “ | By now I was earning a proper wage and I wanted to build my own trimaran. For someone who had never made anything more difficult than a doorstop, this was a major decision. I reckoned that I could rely on Lockie and other yachtie friends to advise me on boatbuilding, and save a lot of time by purchasing a ready-made main hull. But who made stock trimaran hulls? No-one, of course; but Charles Cunningham was turning out fibreglass shells for his 6-metre Austral 20 catamaran. I bought one of these, decked it with plywood, built timber-and-ply crossbeams and floats to Lockie's design and fabricated much of the hardware from stainless-steel plate. | ” |
| — Howard Stephenson[1] | ||
See also
- List of multihulls
- Lock Crowther
References
 |  |
