Chemistry:Cobalt ferrite
| Names | |
|---|---|
| IUPAC name
cobalt(2+);iron(3+);oxygen(2-)
| |
| Identifiers | |
3D model (JSmol)
|
|
| ChemSpider | |
| EC Number |
|
PubChem CID
|
|
| |
| |
| Properties | |
| CoFe2O4 | |
| Molar mass | 234.619 g·mol−1 |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). | |
| Infobox references | |
Cobalt ferrite is a semi-hard ferrite with the chemical formula of CoFe2O4 (CoO·Fe2O3). The substance can be considered as between soft and hard magnetic material and is usually classified as a semi-hard material.[1]
Applications
It is mainly used for its magnetostrictive applications like sensors and actuators [2] thanks to its high saturation magnetostriction (~200 ppm). CoFe2O4 has also the benefits to be rare-earth free, which makes it a good substitute for Terfenol-D.[3] Moreover, its magnetostrictive properties can be tuned by inducing a magnetic uniaxial anisotropy.[4] This can be done by magnetic annealing,[5] magnetic field assisted compaction,[6] or reaction under uniaxial pressure.[7] This last solution has the advantage to be ultra fast (20 min) thanks to the use of spark plasma sintering. The induced magnetic anisotropy in cobalt ferrite is also beneficial to enhance the magnetoelectric effect in composite.[8]
Cobalt ferrite can be also used as electrocatalyst for oxygen evolution reaction and as material for fabricating electrodes for electrochemical capacitors (also named supercapacitors) for energy storage. These uses take advantage of the redox reactions occurring at the surface of the ferrite. Cobalt ferrite prepared with controlled morphology and size to enhance the surface area, and thus the number of active sites, has been published.[9] One disadvantage of the cobalt ferrite for some applications is their low electrical conductivity. Nanostructures of cobalt ferrite with different shape can be synthesized on conducting substrates, such as reduced graphene oxide, to alleviate this disadvantage.[9]
See also
References
- ↑ Hosni (2016). "Semi-hard magnetic properties of nanoparticles of cobalt ferrite synthesized by the co-precipitation process". Journal of Alloys and Compounds 694: 1295–1301. doi:10.1016/j.jallcom.2016.09.252.
- ↑ Olabi (2008). "Design and application of magnetostrictive materials". Materials & Design 29 (2): 469–483. doi:10.1016/j.matdes.2006.12.016. http://doras.dcu.ie/15063/1/Olabi-MS-paper-12-09-06.pdf.
- ↑ Sato Turtelli (2014). "Co-ferrite – A material with interesting magnetic properties". IOP Conference Series: Materials Science and Engineering 60: 012020. doi:10.1088/1757-899X/60/1/012020.
- ↑ J. C. Slonczewski (1958). "Origin of Magnetic Anisotropy in Cobalt-Substituted Magnetite". Physical Review 110 (6): 1341–1348. doi:10.1103/PhysRev.110.1341.
- ↑ Lo (2005). "Improvement of magnetomechanical properties of cobalt ferrite by magnetic annealing". IEEE Transactions on Magnetics 41 (10): 3676–3678. doi:10.1109/TMAG.2005.854790.
- ↑ Wang (2015). "Magnetostriction properties of oriented polycrystalline CoFe2O4". Journal of Magnetism and Magnetic Materials 401: 662–666. doi:10.1016/j.jmmm.2015.10.073.
- ↑ Aubert, A. (2017). "Uniaxial anisotropy and enhanced magnetostriction of CoFe2O4 induced by reaction under uniaxial pressure with SPS". Journal of the European Ceramic Society 37 (9): 3101–3105. doi:10.1016/j.jeurceramsoc.2017.03.036. https://hal.archives-ouvertes.fr/hal-01636264.
- ↑ Aubert, A. (2017). "Enhancement of the Magnetoelectric Effect in Multiferroic CoFe2O4/PZT Bilayer by Induced Uniaxial Magnetic Anisotropy". IEEE Transactions on Magnetics 53 (11): 1–5. doi:10.1109/TMAG.2017.2696162. https://hal.archives-ouvertes.fr/hal-01636268.
- ↑ 9.0 9.1 Ortiz-Quiñonez, Jose-Luis; Das, Sachindranath; Pal, Umapada (October 2022). "Catalytic and pseudocapacitive energy storage performance of metal (Co, Ni, Cu and Mn) ferrite nanostructures and nanocomposites". Progress in Materials Science 130: 100995. doi:10.1016/j.pmatsci.2022.100995.
 |  |
