Advanced Intelligent Tape
Advanced Intelligent Tape (AIT) is a discontinued high-speed, high-capacity magnetic-tape data storage format developed and controlled by Sony. It was introduced in 1996 to use . It competed mainly against the DLT, LTO, DAT/DDS, and VXA formats. AIT uses 8 mm tape in a cassette similar to Video8. Super AIT (SAIT) is a higher-capacity variant using wider half-inch (1/2"; 12.7 mm) tape in a larger, single-spool cartridge. Both AIT and SAIT use the helical scan method of reading and writing to the tape.
Form factors
AIT technology was available in two form factors:
- AIT – 8 mm, dual-reel cartridge, similar to Sony's 8 mm videotape products and Exabyte's 8 mm data tape products.
- SAIT – 1/2" (12.7 mm), single-reel cartridge, similar to DLT and LTO.
In March 2010, Sony announced the discontinuation of the AIT product line and renewed collaboration with Hewlett-Packard on further development of the DDS tape format,[1]
Compatibility
One of the most compelling features of the AIT format is that many generations are both backwards and forwards compatible.[citation needed] This allows multiple generations of tape drives to both read and write to multiple generations of tape media.
AIT generations
| Generation | AIT-E Turbo | AIT-1 | AIT-1 Turbo | AIT-2 | AIT-2 Turbo |
|---|---|---|---|---|---|
| Release date | 2004 | 1996 | 2004 | 1999 | |
| Native capacity (GB) | 20 | 25, 35 | 40 | 36, 50 | 80 |
| Max speed (MB/s) | 6 | 3, 4 | 6 | 6 | 12 |
| Encoding | Trellis coding for partial response (TCPR) | ||||
| 4800 | 6400 | ||||
| Tape length (m) | 98 | 170, 230 | 186 | 170, 230 | 186 |
| Tape thickness (μm) | 6.6 | 7.0, 5.3 | 6.6 | 7.0, 5.3 | 6.6 |
AIT-1
- Original specification's data capacity up to 25 GB native and up to 65 GB compressed, with a data transfer speed of 3 MB/s.
- Extended length tape, introduced in 1999 gave additional capacity, 35 GB.
- Speed increased to 4 MB/s in 2001.
- Turbo variant, introduced in 2004, is 50% faster (6 MB/s) and holds 40 GB.
- A budget version, AIT-E Turbo, was also introduced in 2004 to compete with DDS.
- SATA version of AIT-1 Turbo available in 2006.
AIT-2
- Doubled capacity and transfer speed
- WORM technology introduced
- Turbo variant has 100% higher capacity and is 100% faster (same speed as AIT-3)
- Turbo variant introduced R-MIC technology
- SATA version of AIT-2 Turbo available in 2006
- Higher-capacity TAIT2-80N (Turbo) 80 GB native.
| Generation | AIT-3 | AIT-3Ex | AIT-4 | AIT-5 | AIT-6 |
|---|---|---|---|---|---|
| Release date | 2001 | 2006 | 2005 | 2006 | cancelled |
| Native capacity (GB) | 100 | 150 | 200 | 400 | 800 |
| Max speed (MB/s) | 12 | 18 | 24 | 24 | |
| Encoding | Extended TC-PRML | Turbo-coded modulation | Turbo-coded modulation | ||
| Tape length (m) | 230 | 246 | 246 | ||
| Tape thickness (μm) | 5.3 | 4.8 | 4.8 | ||
| WORM-capable | Yes | Yes | Yes | Yes |
AIT-3
- Doubled capacity and transfer speed
- Ex variant has 50% higher capacity and is 50% faster
AIT-4
- Doubled capacity and transfer speed
- New tape formulation, AME-2
- Not compatible with previous generations
AIT-5
- Available September 27, 2006[2]
- Announced July 2006, hardware and media expected "in the fall".
- Doubled capacity (via halved tracked pitch to 2.2 μm), maintained transfer speed.
- Backwards compatible with AIT-3, AIT-3Ex, AIT-4
- New tape formulation, AME-3, which uses finer cobalt particles, resulting in SNR gain of 1 dB compared with AIT-4/AME-2.
- A switch to GMR head technology (Flux Guide GMR).
SAIT generations
| Generation | SAIT-1 | SAIT-2 | SAIT-3 | SAIT-4 |
|---|---|---|---|---|
| Release date | 2003 | 2006 | cancelled | cancelled |
| Native capacity (GB) | 500 | 800 | 2000 | 4000 |
| Max speed (MB/s) | 30 | 45 | 120 | 240 |
| Tape length (m) | 600 | 640 | ||
| Tape thickness (μm) | 8.6 |
SAIT-1
- Highest-capacity tape cartridge from 2003 to 2006. Displaced by DLT-S4 (800 GB).
The AIT format was developed and is controlled by Sony.
SAIT-2
Released in 2006 by Sony, available only in libraries, 800 GB native and 45 MB/s sustained transfer rate.[3]
Notes
- Data capacity and speed numbers above are for uncompressed data. Sony assumes a 2× or 2.6× compression factor in their marketing material.[citation needed]
- According to Sony, "All future products are based on technology projections."[citation needed]
Technical features
 | This section does not cite any external source. HandWiki requires at least one external source. See citing external sources. (May 2026) (Learn how and when to remove this template message) |
AME
Advanced Metal Evaporated is a different formulation of tape media.[clarification needed]
MIC
Memory-in-Cassette is a 16–64 KB memory chip in the cartridge that keeps relevant information about the data on the tape to allow quicker access. The drive did not have to read the whole tape until it came across the file required like a file index.
R-MIC
Remote-Memory in Cassette. Like MIC, except it does not require physical contact.
WORM
Write once read many functionality, useful for archive keeping.
References
- ↑ "Sony Kills AIT Line of Storage Products". http://synergybroadcast.com/blog/?p=2370.
- ↑ "Sony announces availability of its fifth generation tape drive and media in celebrating 10 years of AIT" (PDF) (Press release). Sony. September 27, 2006. Archived (PDF) from the original on 28 September 2007. Retrieved 2007-10-15.
- ↑ "SAIT2-800". Sony. http://www.sonybiz.net/biz/view/ShowProduct.action?product=SAIT2-800&site=biz_en_EU&pageType=OverviewFeatures&category=STO+S-AIT. Retrieved 2007-01-30.
External links
- ECMA 246 Specification of AIT-1. [1]
- ECMA 291 Specification of AIT-1 w/ MIC. [2]
- ECMA 292 Specification of AIT-2 w/ MIC. [3]
- ECMA 329 Specification of AIT-3. [4]
 |  |
