Energy class

From HandWiki
Short description: Earthquake magnitude scale


Part of a series on
Earthquakes
Types
Causes
Characteristics
Measurement
Prediction
Other topics

Energy class – also called energy class K or K-class , and denoted by K (from the Russian класс) – is a measure of the force or magnitude of local and regional earthquakes used in countries of the former Soviet Union, and Cuba and Mongolia.[1] K is nominally the logarithm of seismic energy (in Joules) radiated by an earthquake, as expressed in the formula K = log ES.[2] Values of K in the range of 12 to 15 correspond approximately to the range of 4.5 to 6 in other magnitude scales;[3] a magnitude title|Moment mag. scale|Mw|dotted=no}} 6.0 quake will register between 13 and 14.5 on various K-class scales.[4] The energy class system was developed by seismologists of the Soviet Tadzhikskaya Complex [Interdisciplinary] Seismological Expedition established in the remote Garm (Tajikistan) region of Central Asia in 1954 after several devastating earthquakes in that area.[5]

The Garm region is one of the most seismically active regions of the former Soviet Union,[6] with up to 5,000 earthquakes per year.[7] The volume of processing needed, and the rudimentary state of seismological equipment and methods at that time, led the expedition workers to develop new equipment and methods.[8] V. I. Bune is credited with developing a scale based on an earthquake's seismic energy,[9] although S. L. Solov'ev seems to have made major contributions.[10] (In contrast to the "Richter" and other magnitude scales developed by Western seismologists, which estimate the magnitude from the amplitude of some portion of the seismic waves generated, an indirect measure of seismic energy.)

However, proper estimation of ES requires more sophisticated tools than were available at the time, and Bune's method was unworkable.[11] A more practical revision was presented by T. G. Rautian in 1958 and 1960; by 1961 K-class was being used across the USSR.[12] A key change was to estimate ES on the basis of peak amplitude of the seismic waves – particularly, the sum of maximum P-wave and maximum S-wave – within the first three seconds.[13] As a result, K-class became a kind of local magnitude scale, similarly limited to local and regional earthquakes of about M 6.5 (K 15) or less, above which point it saturates (underestimates the magnitude).[14]

Rautian also developed a nomogram to simplify some of the calculations, and used a number of simplifying assumptions appropriate for the Garm region.[15] That version is sometimes labelled KR to distinguish it from other versions – KF, KS, KFS, KC, etc. – that have been adapted for the Sakhalin, Kurile, and Kamchatka regions in the Far East.[16]

There are various formulas to convert K-class to other magnitude scales; these are usually specific to the regional network.[17] M(K) (or some variant) is sometimes used to identify magnitudes that have been calculated from a K value.[18]

See also

Notes

  1. ↑ Rautian et al. 2007; IS 3.7 2012, pp. 1, 6.
  2. ↑ NMSOP-2 Information Sheet IS 3.7 2012, p. 1.
  3. ↑ Bindi et al. 2011, p. 330.
  4. ↑ IS 3.7 2012, Figure 9.
  5. ↑ Neresov & Riznichenko 1960, pp. 1, 4, 6; Rautian et al. 2007, p. 579.
  6. ↑ Neresov & Riznichenko 1960, p. 10.
  7. ↑ Rautian et al. 2007, p. 579.
  8. ↑ Neresov & Riznichenko 1960, p. 7; Rautian et al. 2007, p. 579.
  9. ↑ Rautian et al. 2007, p. 579.
  10. ↑ Solov'ev is mentioned in this regard in Rautian et al. 2007, p. 579. Solov'ev's dissertation, "Energy Classification of Earthquakes of the USSR", and two other related works are cited in Bunz & Gzovskiy 1960, p. 519.
  11. ↑ Rautian et al. 2007, pp. 580–581 IS 3.7 2012, pp. 2–3
  12. ↑ Rautian et al. 2007, p. 581.
  13. ↑ IS 3.7 2012, pp. 2, 3. See (Rautian Khalturin) for a more detailed description.
  14. ↑ Bormann, Wendt & Di Giacomo 2013, p. 75; IS 3.7 2012, pp. 3, 7, 22.
  15. ↑ Rautian et al. 2007, pp. 581-581.
  16. ↑ Rautian & Leith 2002, p. 160, and map coordinates for regions in Table 3, pp. 162–163; Rautian et al. 2007, pp. 583–584, 587, map of regional networks on p. 580; IS 3.7 2012, §3.
  17. ↑ See Table 1 in (IS 3.7 2012) for a list. See also Bormann, Wendt & Di Giacomo 2013, pp. 75–76 on the challenge of converting K values into magnitudes.
  18. ↑ Rautian & Leith 2002, p. 160.

Sources

  • {{Citation
|ref= CITEREFNeresovRiznichenko1960
|first1= V. I.
|last1= Neresov
|first2= Yu. V.
|last2= Riznichenko
|date= 1963
|orig-year= 1960
|chapter= Introduction
|editor1-first= V. I.
|editor1-last= Bunz
|editor2-first= M. V.
|editor2-last= Gzovskiy
|editor3-first= Yu. V.
|editor3-last= Riznichenko
|title= Methods for a Detailed Study of Seismicity [Metody Detal'nogg Izucheniya Sesmichonsti]
|publisher= Izdatel'stvo Akademii Nauk SSSR
|place= Moscow
|chapter-url= http://www.dtic.mil/get-tr-doc/pdf?AD=AD0400507
  • Rautian, T. G.; Khalturin, V. I.; Fujita, K.; Mackey, K. G.; Kendall, A. D. (November–December 2007), "Origins and Methodology of the Russian Energy K-Class System and Its Relationship to Magnitude Scales", Seismological Research Letters 78 (6): 579–590, doi:10.1785/gssrl.78.6.579, Bibcode: 2007SeiRL..78..579R .



Retrieved from "https://handwiki.org/wiki/index.php?title=Energy_class&oldid=3432361"