Engineering:Dubonnet suspension

From HandWiki
Alfa Romeo P3 Tipo B with Dubonnet front suspension

Dubonnet suspension was a system of leading arm independent front suspension and steering popular mainly in the 1930s and 1940s. Not very durable unless exactingly maintained, it was soon replaced by other designs. It consisted of a rigidly mounted axle beam from which the sprung steering and suspension arms pivoted around kingpins mounted on the ends of the axle. The wheels themselves were mounted onto stub axles, suspended by self-contained suspension units outboard of the kingpins. The system featured an encased coil spring and shock absorber, which sealed in the oil needed to lubricate and protect the suspension parts. This was also the weakness of the layout, as any leaks would have negative effects on ride and durability.

Front right suspension unit (forward direction to the upper left)

One advantage for a comfortable ride was the reduction in unsprung weight, as the kingpins and steering gear were inboard of the suspension, and not thus counted as sprung mass. This in turn led to 'synchronous' behaviour in many cars with this suspension, where the natural frequency of the front wheel suspension now, unusually for the time, matched that of the rear suspension and their solid driving axle.[lower-roman 1] The mass of the driving axle was greater but with the now softer springs of the lightweight front suspension,[lower-roman 2] their frequencies became comparable. This was a feature of Opel patents and advertising in the 1930s.

Dubonnet's own Hispano-Suiza H6B Dubonnet Xenia

The system was invented by French engineer and designer André Dubonnet[1][2] (heir to the Dubonnet vermouth fortune), and built into his Hispano-Suiza based special of 1933.[3] He sold it to General Motors who adapted it as their "Knee-action ride",[4] but the system was also used by many others including Fiat, Alfa Romeo, Simca, and, possibly in its last incarnation, the 1953 Iso Isetta which carried forward to the 1955 BMW Isetta, the 1957 BMW 600 and the 1959 BMW 700.[5]

The General Motors connection led to one of the suspension's most numerous uses, with a return to Europe for the pre-war Vauxhall Twelve and Vauxhall Fourteen from 1935 to 1938.[6] The post-war Vauxhall Velox of 1949 reintroduced a similar leading arm suspension which is widely described as 'Dubonnet' suspension.[7] However this suspension used torsion bars rather than coil springs and so Vauxhall themselves denied that this was the 'true' Dubonnet.[6]

References

  1. ↑ Almost all cars up to the 1950s used the Hotchkiss layout of front engine, and rear wheel drive through a solid rear axle.
  2. ↑ Assuming simple harmonic motion for a simplified mass-and-spring-system, with mass [math]\displaystyle{ m }[/math] and spring stiffness [math]\displaystyle{ k }[/math], the natural frequency can be calculated as:
    [math]\displaystyle{ \omega _0 =\sqrt{\frac{k}{m}} }[/math]
    Thus both a lower mass and softer springs together still give the same frequency.
  1. ↑ Dubonnet, André, "Lagerung für ein die Außenseite des Lenkrades von Kraftfahrzeugen abdeckendes Verkleidungsblech [Bearing for a covering panel covering the outside of the steering wheel of motor vehicles]", DE patent 644372, published 1937-04-29
  2. ↑ Dubonnet, André, "Radabfederung, insbesondere für Kraftfahrzeuge [Wheel suspension, especially for motor vehicles]", DE patent 697702, published 1940-10-21
  3. ↑ Rousseau, Jacques; Caron, Jean-Paul (1988). Guide de l'Automobile Française. Paris: Solar. p. 49. ISBN 2-263-01105-6. 
  4. ↑ Gunnell, John. "A Good Steer: Shocks with wine name can make you whine when time comes to fix them". ChevyTalk.org. Archived from the original on 2011-03-15. https://web.archive.org/web/20110315091000/http://gmhistory.chevytalk.org/kneeaction1.htm. Retrieved 2010-10-18. 
  5. ↑ Trezel, Thierry (2010-09-03). "Dubonnet: Du spiritueux à l'automobile". mini.43. http://mini.43.free.fr/dubonnet.html. Retrieved 2010-10-18. 
  6. ↑ 6.0 6.1 F. J. Woodbridge, Manager—Technical Division Service Department, Vauxhall Motors, Luton (May 1949). "Letters from Readers". Motor Sport: 36. http://www.motorsportmagazine.com/archive/article/may-1949/36/sir-2. 
  7. ↑ WB (March 1949). "The New Vauxhall 'Velox'". Motor Sport: 19. http://www.motorsportmagazine.com/archive/article/march-1949/19/new-vauxhallvelox. 



Retrieved from "https://handwiki.org/wiki/index.php?title=Engineering:Dubonnet_suspension&oldid=2899919"