Engineering:Fuel line
A fuel line is a hose or pipe used to transfer fuel from one point in a vehicle to another. The United States Environmental Protection Agency defines a fuel line as "all hoses or tubing designed to contain liquid fuel or fuel vapor. This includes all hoses or tubing for the filler neck, for connections between dual fuel tanks, and for connecting a carbon canister to the fuel tank. This does not include hoses or tubing for routing crankcase vapors to the engine's intake or any other hoses or tubing that are open to the atmosphere."[1]
Materials
Rubber
Most vehicles have rubber fuel hoses connecting the fuel pipes on the chassis to the fuel pump or carburetor on the engine. Rubber hoses are flexible and can be cut to length as required, but they have a tendency to perish over time and can rub through if not properly secured.[2]
Plastic
More modern vehicles may be fitted with fuel lines made of plastic, typically nylon. Plastic fuel lines do not perish and are lighter than metal tubing, but they melt at lower temperatures and cannot be repaired as easily.[3]
Steel
Many FF or FR vehicles with fuel tanks at the rear are fitted with rigid steel fuel pipes that run the length of the chassis from the tank to the engine bay. Steel pipes are cheap and strong, but can corrode causing fuel leaks.
Copper
Older vehicles may be fitted with copper fuel pipes. These are easy to fit and repair, but copper is heavy and expensive when compared with the other options.
Fittings
Traditionally fuel lines had flared or compression fittings on the rigid pipe sections, and hose clamps where rubber hoses attached to metal components. In modern cars with plastic fuel lines, quick release fittings are becoming more common – this allows the fuel system components to simply clip together.
Priming
The primer bulb can be found on the fuel line between the gas tank and the carburetor.[4] When you prime the carburetor, you are pushing fuel from the carb bowl to the barrel using the rubber primer bulb.
See also
References
- ↑ Definitions and Other Reference Information, Code of Federal Regulations, Title 40, Volume 31, Revised as of July 1, 2006, From the U.S. Government Printing Office via GPO Access, CITE: 40CFR1051.801, p. 667. akamaitech.net
- ↑ "The difference between PTFE and Nitrile Rubber Hoses". 20 February 2018. https://www.viperperformance.co.uk/blog/difference-ptfe-nitrile-rubber-hoses/.
- ↑ Harrigan, M. J.. "Design Considerations for Plastic Fuel Lines". SAE Transactions.
- ↑ "Explaining primer bulb: bulb for boat won't get hard". https://www.boatkeep.com/troubleshooting/why-boat-fuel-line-primer-bulb-not-getting-hard-debug-and-fix.
External links
 |  |
