Engineering:PSI Comp 80
In 1979, the British magazine Wireless World published the technical details for a "Scientific Computer".[1] Shortly afterward the British firm Powertran used this design for their implementation, which they called the PSI Comp 80. It was sold in the form of a kit of parts for a cased single-board home computer system. The system was based on a Z80 Microprocessor addressing a mixture of 8 KB of system RAM and EPROM, plus 2 KB of Video RAM.
It used a National Semiconductor MM57109N as a mathematical co-processor to speed up calculations.
The monochrome Video Display Controller could simultaneously display combinations of 32 lines of 64 characters, and 128 x 64 resolution graphics by either displaying a normal character or a "pseudo graphics" character, with pixel blocks in a 2x2 matrix. A technique similar to the one used in the TRS-80 - It could later be expanded to a higher resolution, although never to colour.
Ahead of its time, it incorporated a number crunching coprocessor and a novel language embedded in EPROM called Basic Using Reverse Polish - BURP.
Add-ons were developed for the system, including memory expansions, floppy and hard disk interfaces, various software packages and a disk operating system, SCIDOS, which was CP/M-compatible but also included features - structured (pathed) disk folders, etc. - now very familiar to modern-day PC users.
During the mid-1980s, the designer of this system, John Adams M.SC., published a new version of the Scientific Computer - the SC84 (Scientific Computer of 1984). It was based upon a backplane and plug-in cards and modules and featuring a Hitachi HD64180 processor, up to 512 kbytes of RAM and a high resolution colour graphics system.
References
- ↑ J H Adams (1979-01-01). PSI Comp 80 from Wireless World 1979-80. https://archive.org/details/PSIComp80-WirelessWorld-1979-80.
PSI 2020
External links
- a picture of the advertisement for the PSI Comp 80 in Wireless World
- Links to Wireless World articles
- SC84 article
 |  |
