Engineering:Plasma gasification

From HandWiki
Short description: Thermal process converting organic matter into synthesis gas using a plasma torch
Plasma Arc gasification
Process typeChemical
Industrial sector(s)Waste management
Energy
Main technologies or sub-processesPlasma arc
Plasma electrolysis
FeedstockMunicipal and industrial waste
Biomass
Solid hydrocarbons
Product(s)Syngas
Slag
Separated metal scrap

Plasma gasification is an extreme thermal process using plasma which converts organic matter into a syngas (synthesis gas) which is primarily made up of hydrogen and carbon monoxide. A plasma torch powered by an electric arc is used to ionize gas and catalyze organic matter into syngas, with slag[1][2][3] remaining as a byproduct. It is used commercially as a form of waste treatment, and has been tested for the gasification of refuse-derived fuel, biomass, industrial waste, hazardous waste, and solid hydrocarbons, such as coal, oil sands, petcoke and oil shale.[2]

Process

Small plasma torches typically use an inert gas such as argon where larger torches require nitrogen. The electrodes vary from copper or tungsten to hafnium or zirconium, along with various other alloys. A strong electric current under high voltage passes between the two electrodes as an electric arc. Pressurized inert gas is ionized passing through the plasma created by the arc. The torch's temperature ranges from 2,000 to 14,000 °C (3,600 to 25,200 °F).[4] The temperature of the plasma reaction determines the structure of the plasma and forming gas.[5]

The waste is heated, melted and finally vaporized. Only at these extreme conditions can molecular dissociation occur by breaking apart molecular bonds. Complex molecules are separated into individual atoms. The resulting elemental components are in a gaseous phase (syngas). Molecular dissociation using plasma is referred to as "plasma pyrolysis."[6]

Feedstocks

The feedstock for plasma waste treatment is most often refuse-derived fuel, biomass waste, or both. Feedstocks may also include biomedical waste and hazardous materials. Content and consistency of the waste directly impacts performance of a plasma facility. Pre-sorting to extract treatable material for the gasification provides consistency. Too much inorganic material such as metal and construction waste increases slag production, which in turn decreases syngas production. However, a benefit is that the slag itself is chemically inert and safe to handle (certain materials may affect the content of the gas produced, however[7]). Shredding waste to small uniform particles before entering the main chamber is generally required. This creates an efficient transfer of energy which enable sufficient breakdown of the materials.[7]

Steam is sometimes added into gasification processes to increase the generation of hydrogen (steam reforming).

Yields

Pure highly calorific synthesis gas consists predominantly of carbon monoxide (CO) and hydrogen (H2).[8] Inorganic compounds in the waste stream are not broken down but melted, which includes glass, ceramics, and various metals.

The high temperature and lack of oxygen prevents the formation of many toxic compounds such as furans, dioxins, nitrogen oxides, or sulfur dioxide in the flame itself. However, dioxins are formed during cooling of the syngas.

Metals resulting from plasma pyrolysis can be recovered from the slag and eventually sold as a commodity. Inert slag produced from some processes is granulated and can be used in construction. A portion of the syngas produced feeds on-site turbines, which power the plasma torches and thus support the feed system.[8]

Equipment

Some plasma gasification reactors operate at negative pressure,[1] but most attempt to recover [9] gaseous and/or solid resources.

Advantages

The main advantages of plasma torch technologies for waste treatment are:

  • Preventing hazardous waste from reaching landfills[10][11]
  • Some processes are designed to recover fly ash, bottom ash, and most other particulates, for 95% or better diversion from landfills, and no harmful emissions of toxic waste[12]
  • Potential production of vitrified slag which could be used as construction material[13]
  • Processing of biomass waste into combustible syngas for electric power and heat[14] or for synthesis into fuels or chemicals.
  • Production of value-added products (metals) from slag[15]
  • Safe means to destroy both medical[16] and many other hazardous wastes.[1][17]
  • Gasification with starved combustion and rapid quenching of syngas from elevated temperatures can avoid the production of dioxins and furans that are common to incinerators
  • Air emissions can be cleaner than landfills and similar to that of incinerators.

Disadvantages

Main disadvantages of plasma torch technologies for waste treatment are:

  • Large initial investment costs relative to that of alternatives, including landfill[18] and incineration.
  • Operational costs are high relative to that of incineration.
  • Wet feed stock results in less syngas production and higher energy consumption.
  • Little or even negative net energy production when taking into account all energy inputs.
  • Frequent maintenance and limited plant availability.

Commercialization

Plasma torch gasification is used commercially for waste disposal[30] at a total of five sites worldwide with a combined design capacity of 200 tonnes of waste per day, half of which is biomass waste.

Energy recovery from waste streams using plasma gasification is currently implemented in a total of one (possibly two) installation representing a treatment capacity of 25-30 tonnes per day of waste.

Military use

The US Navy is employing Plasma Arc Waste Destruction System (PAWDS) on its latest generation Gerald R. Ford-class aircraft carrier. The compact system being used will treat all combustible solid waste generated on board the ship. After having completed factory acceptance testing in Montreal, the system is scheduled to be shipped to the Huntington Ingalls shipyard for installation on the carrier.[31]

See also

References

  1. ↑ 1.0 1.1 1.2 Moustakasa, K.; Fattab, D.; Malamisa, S.; Haralambousa, K. et al. (2005-08-31). "Demonstration plasma gasification/vitrification system for effective hazardous waste treatment". Journal of Hazardous Materials 123 (1–3): 120–126. doi:10.1016/j.jhazmat.2005.03.038. PMID 15878635. 
  2. ↑ 2.0 2.1 Kalinenko, R. A.; Kuznetsov, A. P.; Levitsky, A. A.; Messerle, V. E. et al. (1993). "Pulverized coal plasma gasification". Plasma Chemistry and Plasma Processing 13 (1): 141–167. doi:10.1007/BF01447176. 
  3. ↑ Messerle, V. E.; Ustimenko, A. B. (2007). "Solid Fuel Plasma Gasification". in Syred, Nick; Khalatov, Artem. Advanced Combustion and Aerothermal Technologies. Environmental Protection and Pollution Reductions. Springer Netherlands. pp. 141–156. doi:10.1007/978-1-4020-6515-6. ISBN 978-1-4020-6515-6. https://archive.org/details/advancedcombusti00syre_448. 
  4. ↑ "The Recovered Energy System: Discussion on Plasma Gasification". http://www.recoveredenergy.com/d_plasma.html. 
  5. ↑ Bratsev, A. N.; Popov, V. E.; Rutberg, A. F.; Shtengel’, S. V. (2006). "A Facility for Plasma Gasification of Waste of Various Types". High Temperature 44 (6): 823–828. doi:10.1007/s10740-006-0099-7. 
  6. ↑ Huang, H.; Lan Tang; C. Z. Wu (2003). "Characterization of Gaseous and Solid Product from Thermal Plasma Pyrolysis of Waste Rubber". Environmental Science & Technology 37 (19): 4463–4467. doi:10.1021/es034193c. Bibcode: 2003EnST...37.4463H. 
  7. ↑ 7.0 7.1 "How Stuff Works- Plasma Converter". 2007-04-25. http://science.howstuffworks.com/environmental/energy/plasma-converter.htm. 
  8. ↑ 8.0 8.1 "Plasma Gasification". United States Department of Energy. http://www.netl.doe.gov/technologies/coalpower/gasification/gasifipedia/4-gasifiers/4-1-4-1a_westinghouse.html. 
  9. ↑ Camacho, Salvador L., "Method for the Gasification of Carbonaceous Matter by Plasma Arc Pyrolysis", patent, published 1980-01-01
  10. ↑ Springer, Marlin D.; William C. Burns & Thomas Barkley, "Apparatus and Method for Treating Hazardous Waste", patent, published 1996-07-09
  11. ↑ Titus, Charles H.; Daniel R. Cohn & Jeffrey E. Surma, "Arc Plasma-Melter Electro Conversion System for Waste Treatment and Resource ...", patent, published 1997-09-16
  12. ↑ Lemmens, Bert; Helmut Elslander; Ive Vanderreydt; Kurt Peys et al. (2007). "Assessment of Plasma Gasification of High Caloric Waste Streams". Waste Management 27 (11): 1562–1569. doi:10.1016/j.wasman.2006.07.027. ISSN 0956-053X. PMID 17134888. 
  13. ↑ Mountouris, A.; E. Voutsas; D. Tassios (2008). "Plasma Gasification of Sewage Sludge: Process Development and Energy Optimization". Energy Conversion and Management 49 (8): 2264–2271. doi:10.1016/j.enconman.2008.01.025. 
  14. ↑ Leal-Quirós, Edbertho (2004). "Plasma Processing of Municipal Solid Waste". Brazilian Journal of Physics 34 (4B): 1587–1593. doi:10.1590/S0103-97332004000800015. Bibcode: 2004BrJPh..34.1587L. 
  15. ↑ Jimbo, Hajime (1996). "Plasma Melting and Useful Application of Molten Slag". Waste Management 16 (5): 417–422. doi:10.1016/S0956-053X(96)00087-6. 
  16. ↑ Huang, Haitao; Lan Tang (2007). "Treatment of Organic Waste Using Thermal Plasma Pyrolysis Technology". Energy Conversion and Management 48 (4): 1331–1337. doi:10.1016/j.enconman.2006.08.013. 
  17. ↑ Tendler, Michael; Philip Rutberg; Guido van Oost (2005-05-01). "Plasma Based Waste Treatment and Energy Production". Plasma Physics and Controlled Fusion 47 (5A): A219. doi:10.1088/0741-3335/47/5A/016. ISSN 0741-3335. Bibcode: 2005PPCF...47A.219T. 
  18. ↑ Pourali, M. (2010). "Application of Plasma Gasification Technology in Waste to Energy #x2014;Challenges and Opportunities". IEEE Transactions on Sustainable Energy 1 (3): 125–130. doi:10.1109/TSTE.2010.2061242. ISSN 1949-3029. Bibcode: 2010ITSE....1..125P. 
  19. ↑ "National Cheng Kung University - Tainan, Taiwan". PEAT International. http://www.peat.com/national_cheng.html. 
  20. ↑ Williams, R.B.; Jenkins, B.M.; Nguyen, D. (December 2003) (PDF). Solid Waste Conversion: A review and database of current and emerging technologies (Report). University of California, Davis, Department of Biological and Agricultural Engineering. p. 23. http://biomass.ucdavis.edu/pages/reports/Conversion-PhaseI_IWM-C0172.pdf. 
  21. ↑ "About the Project". A Partnership for a Zero Waste Ottawa. http://www.zerowasteottawa.com/en/About-Project/. 
  22. ↑ Czekaj, Laura (2008-12-07). "Mechanical problems plague Plasco". Ottawa Sun. 
  23. ↑ "AFSOC makes 'green' history while investing in future". US Air Force Special Operations Command. http://www.afsoc.af.mil/news/story.asp?id=123253735. 
  24. ↑ "INEOS Bio Commercializes bioenergy technology in Florida". Biomass Program. 2011-11-21. http://www1.eere.energy.gov/biomass/pdfs/ibr_arraprojects_ineos.pdf. 
  25. ↑ "The Plasma Arc Waste Destruction System to Reduce Waste Aboard CVN-78, pg. 13". Seaframe - Carderock Division Publication. 2008. http://www.dtic.mil/cgi-bin/GetTRDoc?Location=U2&doc=GetTRDoc.pdf&AD=ADA519815. 
  26. ↑ "Alter NRG Announces Commissioning of Biomass Gasifier at Waste To Liquids Facility in China" (Press release). Alter NRG. Archived from the original on March 7, 2013. Retrieved 2013-01-29.
  27. ↑ Messenger, Ben (12 April 2013). "Second Plasma Gasification Plant for Teesside Following Government Deal". Waste Management News. http://www.waste-management-world.com/articles/2013/04/plasma-gasification-waste-to-energy-air-products-teesside-uk-government.html. 
  28. ↑ "Air Products Will Exit Energy-from-Waste Business" (Press release). 2016-04-04. Retrieved 2016-04-06.
  29. ↑ Air Products abandons plans for plasma-based energy from waste plants in Tees Valley, 2016-04-05, http://www.newpower.info/2016/04/air-products-abandons-plans-for-plasma-based-energy-from-waste-plants-in-tees-valley/, retrieved 2016-04-06 
  30. ↑ [19][20][21][22][23][24][25][26][27][28][29]
  31. ↑ The Plasma Arc Waste Destruction System to Reduce Waste Aboard CVN-78, pg. 13, Seaframe - Carderock Division Publication, 2008, http://www.dtic.mil/cgi-bin/GetTRDoc?Location=U2&doc=GetTRDoc.pdf&AD=ADA519815 

External links



Retrieved from "https://handwiki.org/wiki/index.php?title=Engineering:Plasma_gasification&oldid=3415048"