Engineering:RAMS
From HandWiki
Short description: Engineering characterization of a product or system
In engineering, RAMS (reliability, availability, maintainability and safety)[1][2] is used to characterize a product or system:
- Reliability – as ability to perform a specific function and may be given as design reliability or operational reliability.
- Availability, – as ability to keep a functioning state in the given environment.
- Maintainability – as ability to be timely and easily maintained (including servicing, inspection and check, repair and/or modification).
- Safety – as ability not to harm people, the environment, or any assets during a whole life cycle.
See also
- Systems engineering
- Dependability
- Failure mode
- Failure rate
- Failure mode, effects, and criticality analysis (FMECA)
- Hazard analysis and critical control points
- High availability
- Risk assessment
- Reliability-centered maintenance
- Safety instrumented system
- Safety integrity level
- Reliability, availability and serviceability (RAS)
- Fault injection
References
- ↑ "Reliability, Availability, and Maintainability - SEBoK". https://www.sebokwiki.org/wiki/Reliability,_Availability,_and_Maintainability.
- ↑ System safety, Norwegian University of Science and Technology
 |
