Engineering:SAM Coupé

From HandWiki
Short description: 8-bit British home computer released in late 1989
SAM Coupé
The SAM Coupé
ManufacturerMiles Gordon Technology
TypeHome computer
Generation8-bit
Release date1989; 35 years ago (1989)
Discontinued1992
Units sold12,000
Operating systemSAM BASIC, CP/M via software
CPUZilog Z80B @ 6 MHz
Memory256 KB/512 KB (4.5 MB max.)
Removable storage3.5-inch floppy disk, Cassette tape
DisplayUHF TV, composite or RGB monitor; 512 × 192 with 4 colors, 256 x 192 with 16 colors
GraphicsMotorola MC 1377P, VGT-200 gate array custom ASIC graphic processor
SoundPhilips SAA1099 (6 channel, 8 octave, stereo, envelope and amplitude control); Beeper
InputMouse, Light pen, Light gun, joystick
ConnectivitySCART, 64-pin Euroconnector, Mouse port, Light pen / Light gun port, 5-pin DIN stereo audio out, MIDI ports, 9-pin joystick port, 3.5 mm mono audio in/out
Backward
compatibility
ZX Spectrum

The SAM Coupé (pronounced /sæm ku:peɪ/ from its original British English branding) is an 8-bit United Kingdom home computer manufactured by Miles Gordon Technology (MGT), based in Swansea in the United Kingdom and released in December 1989.

It was based on and designed to have a compatibility mode with the ZX Spectrum 48K with influences from the Loki project[1] and marketed as a logical upgrade from the Spectrum with increased memory, graphical and sound capabilities, native peripheral support (floppy disk, MIDI, joystick, light pen/light gun and a proprietary mouse).

The inclusion of support for higher graphical modes allowed for 80-column text presentation, providing a platform to support productivity and CP/M applications via additional software.

Being based on 8-bit technology at a time when 16-bit home computers were more prevalent, coupled with a lack of commercial software titles, led to it being a commercial failure.[2][3]

When MGT went into receivership in June 1990[4] two further attempts were made to restart the computer and brand, firstly under SAM Computers Limited[5] and then in November 1992 under West Coast Computers, a company spun from Format Publications which lasted until liquidation in 2005.[6]

Naming

thumb|SAM Coupé profile, illustrating the origin of its car themed name.|left

The capitalised SAM is an acronym for 'Some Amazing Micro' according to Alan Miles.

It has also been reported to be related to 'Some Amazing Machine'.

The ‘Coupé’ nickname has two sources: one being an ice cream sundae called the “Ice Cream Coupé” and the other because the machine resembles a fastback car in profile with the feet as the wheels.[7][8]

Hardware

The SAM Coupé's hardware was designed by Bruce Gordon of Miles Gordon Technology. The computer included custom silicon to handle display, memory and IO functionality. This was originally prototyped using wire-wrapped 7400-series logic chips, before being produced as a VLSI VGT-200 gate array ASIC.[9][10]

Processor and logic

The machine is based around a Z80B CPU clocked at 6 MHz and a 10,000-gate ASIC. The ASIC performs a similar role in the computer to the ULA in the ZX Spectrum. The Z80B CPU accesses selected parts of the large memory space in its 64 KB address space by slicing it into 16 KB banks and using I/O registers to select the memory pages mapped into each 16 KB bank.

Memory and storage

The basic SAM Coupé model has 256 KiB of RAM, internally upgradable to 512 KiB via a connector on the main board accessible via a trapdoor underneath, and externally up to an additional 4 MiB, added in 1 MiB packs via the Euroconnector[11] on the back of the system.

The computer has a direct connection for a cassette recorder for data storage but two 3.5 inch floppy disk drives can be installed within the case as well or externally using an interface.

Graphics

The SAM Coupé was designed primarily for the United Kingdom market, and is designed around the PAL television standard, which refreshes at 50 frames per second. Unlike a standard PAL signal which is interleaved, the SAM is designed to emit two identically positioned fields at 50FPS, giving something closer to a 312 lines progressive signal than the 625-lines interlaced broadcast television signals common in the UK at the time.

The display is surrounded by a large border area to provide a title-safe display zone for the CRT televisions of that era. The colour of this region can be changed in software by using the BORDER port to select a colour from the palette.

The SAM Coupé has four display modes:[12]

  • Mode 4 — 256×192, linear framebuffer, 4 bits per pixel (16 colours) = 24 KB
  • Mode 3 — 512×192, linear framebuffer, 2 bits per pixel (4 colours) = 24 KB
  • Mode 2 — 256×192, linear framebuffer, 1 bit per pixel with separate colour attributes for each 8-wide block of pixels = 12 KB
  • Mode 1 — 256×192, non-linear framebuffer, 1 bit per pixel with separate colour attributes for each 8×8 block of pixels = 6.75 KB (arranged to match the display of the ZX Spectrum for backwards compatibility)

The 'attribute' modes borrow their design from the ZX Spectrum, where a bitmap is used to select between a paper and ink colour from two groups of eight colours. The group to use is selected by a 'brightness' flag. The colour block can also be set to 'flash' - that is, alternate between the two colours used for paper and ink.

Attribute value in-memory layout
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Flash Bright Paper 2 Paper 1 Paper 0 Ink 2 Ink 1 Ink 0

All modes use palette-based colour look-up tables, selecting from a palette of 128 colours. The palette values consist of 2 bits for each of the red, green and blue components as well as an extra bit which increases the intensity of all three components by a half-step (a 'brightness' bit).

Color palette value bits
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
- Green 1 Red 1 Blue 1 Half-Bright Green 0 Red 0 Blue 0

The ASIC can be configured to generate interrupts when a line on the display is starting to be emitted, allowing video effects to be synchronised with specific display lines with little effort. By default, it will generate an interrupt for every frame. Typically this interrupt is used to double buffer the frame, read the keyboard/mouse state, and output music.

The interrupt state can also be polled directly from the ASIC's status register.

The Motorola MC1377P RGB to PAL/NTSC video encoder creates a composite video signal from the machine's RGB- and Sync-signals[13] (output by the ASIC) for the RF modulator.[14][10]

The non-standard SCART display connector includes both composite and RGB output, as well as signals to drive a 16-colour TTL monitor.

Access to internal RAM was shared between the display and the CPU, with CPU accesses incurring a speed penalty (memory contention) as it was forced to waited for isochronous ASIC memory-accesses to complete. As a result, the SAM Coupé's CPU effectively ran only around 14% faster than the ZX Spectrum CPU, yet was required to do much more work in SAM's high-resolution modes to produce a similar movement on the display. A Mode 3 or Mode 4 screen uses four times as much RAM as a ZX Spectrum Mode 1 display, so four times the work had to be done in the same time when updating it.

A small compensation was the straightforward arrangement of colour pixels in this memory, instead of the ZX Spectrum's more limited display and attributes memory. Low-level graphics software operations could be much simpler than their Spectrum equivalents and therefore somewhat faster to execute.

The penalty of memory contention delay applied to all memory accesses to RAM, and not just to memory associated with the video circuitry (as in the case of the ZX Spectrum). Hardware sprites and scrolling would have greatly improved the performance of games, unfortunately there was insufficient wafer space on the VLSI ASIC to include such circuitry.

While the main 256×192 area of the screen was being drawn, the processor could only access memory in 1 out of every 8 t-states. During the border area this was 1 out of every 4 t-states, which had no effect on the many instructions whose timings were a multiple of 4. In modes 3 and 4 the display could be disabled completely, eliminating these memory contention delays for a full 6 MHz running speed. Code running in ROM or external RAM was unaffected by contention, though any RAM accesses they performed to shared internal RAM would still be affected.

Character set

The character set includes block graphics and international characters. Font size can be altered to make text display in 32, 64, or 85 columns, and double height characters are also possible.[12][15] Users can freely define their own characters by creating User Defined Graphics (UDGs). A large number of character codes (144 to 255) are available for this purpose. Block graphics (code 128 to 143) can be turned off in order free more characters for UDGs.[15]

When in BASIC, the cursor is composed of the Blocks off characters (128/129) for lower and upper case respectively regardless of current Blocks setting, so overwriting these positions will also change the cursor. If this is undesirable, then systems variable (SVAR) 1 can be set to a 2-character value for the new lower and upper case cursor characters to be used.

The Utility Tapes and SAMDOS disk operating system media included an international character font loader to allow additional characters to be loaded into the block graphics region starting at 128 (0x80). This meant the cursor characters were overwritten so the accompanying BASIC loader set the cursor to * and + for lower and upper case respectively.[16]

The following table show the predefined character set arrangement:[12][15]

Sam Coupé character set
0 1 2 3 4 5 6 7 8 9 A B C D E F
0
1
2 ! " # $ % & ' ( ) * + , - . /
3 0 1 2 3 4 5 6 7 8 9 : ; < = > ?
4 @ A B C D E F G H I J K L M N O
5 P Q R S T U V W X Y Z [ \ ]
6 £ a b c d e f g h i j k l m n o
7 p q r s t u v w x y z { | } ~ ©
8 Blocks on ZXSpectrum80.svg ZXSpectrum81.svg ZXSpectrum82.svg ZXSpectrum83.svg ZXSpectrum84.svg ZXSpectrum85.svg ZXSpectrum86.svg ZXSpectrum87.svg ZXSpectrum88.svg ZXSpectrum89.svg ZXSpectrum8a.svg ZXSpectrum8b.svg ZXSpectrum8c.svg ZXSpectrum8d.svg ZXSpectrum8e.svg ZXSpectrum8f.svg
Blocks off Samcoupe80.png Samcoupe81.png é
Blocks off, International characters É æ Æ ô ö ò û ù ÿ Ö Ü ¢ £ ¥ ƒ
9 Blocks on
Blocks off, International characters á í ó ú ñ Ñ ª º ¿
A
B
C
D
E
F

Notes:

  • Character codes 0 to 31 (0x00 to 0x1F): control codes
  • Character codes 32 to 168 (0x20 to 0xA8): predefined character set
  • Character codes 128 to 143 (0x80 to 0x8F): block graphics / foreign characters or User Defined Graphics (UDGs)
  • Character codes 144 to 255 (0x90 to 0xFF): User Defined Graphics (UDGs)

Audio

Six channels of 8-octave stereo sound are provided by a Philips SAA1099 sound generator chip. This sound chip can also produce four 3-bit sampled sound channels allowing playback of Amiga Tracker Modules,[17] and generate noise.

To provide backwards compatibility with the ZX Spectrum, the SAM also provides a single-bit 'beeper' channel which can be used to emit simple tones by toggling the bit on and off as per the original Spectrum.

Firmware and DOS

thumb|SAM Coupé bootup screen

The machine shipped with 32 KB of ROM containing code to boot the machine and a BASIC interpreter (SAM BASIC) written by Andrew Wright and heavily influenced by his earlier Beta BASIC for the ZX Spectrum. The ROMs contained only the bootstrap code and the DOS was instead loaded from disk using the BOOT command, or the key. The majority of disks shipped with SAMDOS, the system's first DOS, on them so that they could be directly booted. An improved replacement, MasterDOS, was also developed offering faster disk access, more files and support for the real-time clock accessory to provide file timestamps amongst many other improvements.

The BASIC was very advanced and included code for sprite drawing and basic vector shapes such as lines and circles. The screen co-ordinate system for these was variable and could be arbitrarily scaled and centred. A provision for "recording" sequences of graphics commands so that they could later be repeated without the speed penalty of a BASIC interpreter in between was provided.

The machine is capable of running CP/M 2.2 using the Pro-Dos software with support for both 720 Kilobyte format disks and IDE drives[18]

Disk drives

The original MGT SAM Coupé box — all original MGT material pictured a single disk drive inserted into the right hand side as per the prototypes[19] even though the production model required single drive users to use the left hand bay

The SAM originally used Citizen 3.5 inch slimline drives which slotted in below the keyboard to provide front-facing slots. Like IDE hard disks, these enclosures contained not just the drives but also the drive controllers, a WD1772-02, with the effect that the SAM could use both drives simultaneously.

Due to a flaw in the Coupé's design, resetting the machine while a disk was left in a drive would be liable to cause data corruption on that disk, as while the RESET line is held logic low the ASIC (that generates the 8Mhz clock) is halted thus no clock signal is sent to the drive's controllers.[20]

The double density disks used a format of 2 sides, 80 tracks per side and 10 sectors per track, with 512 bytes per sector. This gave a total capacity of 800 KB, though the standard directory occupied 20 KB leaving 780 KB free for user files. Files were stored in the same structure as MGT's original +D interface, but with additional codes used for SAM Coupé file types. The disk encoding (NRZ), encoding strategy (linear angular velocity), and track and sector header formats were compatible with those used on the IBM PC and Atari ST, and programs were available to read FAT formatted disks.[21][22]

Expansion ports

Rear view of the system. From left to right: NMI break button, MIDI IN/OUT ports, joystick port, mouse port, reset button, Euroconnector expansion port,[11] cassette jack, stereo sound output/lightpen input, power button, SCART socket, power/RF socket

A large array of expansion ports were provided, including:

  • Two internal drive bays.
  • Non-standard SCART connector offering composite video and digital and linear RGB as well as power input.
  • 64-pin Euroconnector[11] for general purpose hardware expansions.
  • Mouse socket (proprietary format, although a converter for Atari ST style mice was later available).
  • Light pen / Light gun and Stereo sound output via 5-pin DIN connector.
  • MIDI IN/OUT ports (and THROUGH, via a software switch).
  • Network using the MIDI port (up to 16 machines could be interconnected).
  • Atari-style 9-pin joystick port (dual capability with a splitter cable although due to a flaw the two joysticks would interfere with each other).
  • 3.5mm mono Cassette jack (dual use for loading and saving).

Up to four devices could be connected to the Coupé's Euroconnector port, through the use of the SAMBUS, which also provided a built-in clock. When using more power-hungry peripherals, the SAMBUS required an additional power supply.[23]

Power

The SAM's Power Supply was a modified Amstrad CPC MP1/MP2 modulator unit, with the RF modulator built in and connected via a joint power/TV socket to the computer. This made signal interference from the AC/DC converter common and it was a popular but entirely unofficial modification to remove the modulator and keep it as a separate unit.[24]

ZX Spectrum compatibility

The Messenger

Emulation of the ZX Spectrum was limited to the 48K and was achieved by either using a supplied utility and a skeleton ROM image (containing no original code) or by loading a complete copy of the ZX Spectrum ROM (obtained from a ZX Spectrum). In order to match the processing speed of the ZX Spectrum (3.5 MHz), the SAM Coupé introduces extra wait states in display Mode 1 (the ZX Spectrum-compatible graphics mode) to slow down the CPU to roughly match the rate of that system.

The 128K model's memory map was incompatible with the Coupé's memory model and the machine featured an entirely different sound generator. It was possible to convert some games and demos by directly hacking the 128K code or by using a software patcher with the 1 megabyte RAM expansion to provide the address space.[25]

Because the Coupé did not run at exactly the same speed as the Spectrum even in emulation mode, many anti-piracy tape loaders would not work on the Coupé hardware. This led to the development by MGT of a special hardware interface called the Messenger which could capture the state of a connected ZX Spectrum to SAM Coupé disk for playback later without the Spectrum connected. The Messenger plugged into the Coupé's network port, and the Spectrum's expansion slot. Due to unsuitable onboard break (NMI) buttons (needed to activate the Messenger software), a de-bounced break-button card was also provided, which plugged into the Coupé's expansion slot.

See also

  • List of SAM Coupé games

References

  1. Owen, Chris (2003). "Loki, Janus, Pandora - The Unreleased Sinclair Computers". https://rk.nvg.ntnu.no/sinclair/computers/loki/loki.htm. 
  2. Alway, Robin (August 1990). "So what really has happened to the SAM Coupe?". Your Sinclair: 40. https://ia800301.us.archive.org/31/items/your-sinclair-56/YourSinclair_56_Aug_1990.pdf. 
  3. Pillar, Jon (September 1992). "SAM Centre - News". Your Sinclair: 38. https://archive.org/details/your-sinclair-81/page/n37/mode/2up. 
  4. "MGT". May 14, 2018. https://www.worldofsam.org/people/mgt. 
  5. Dooré, Dan (May 14, 2018). "Sam Computers Ltd". https://www.worldofsam.org/people/sam-computers-ltd. 
  6. Dooré, Dan (May 14, 2018). "West Coast Computers". https://www.worldofsam.org/people/west-coast-computers. 
  7. "SAM Coupé - SinclairFAQ". https://faqwiki.zxnet.co.uk/wiki/SAM_Coup%C3%A9. 
  8. Dooré, Dan (July 2018). "Naming". https://www.worldofsam.org/products/naming. 
  9. Dooré, Dan (June 24, 2021). "Development machine". https://www.worldofsam.org/products/development-machine. 
  10. 10.0 10.1 Brown, Adrian (May 15, 2018). "ASIC". https://www.worldofsam.org/products/asic. 
  11. 11.0 11.1 11.2 Collier, Andrew (2018). "EuroConnector". https://www.worldofsam.org/products/euroconnector. 
  12. 12.0 12.1 12.2 "Basically". Crash (74): pp. 13. March 1990. https://archive.org/details/crash-magazine-74/page/n11/mode/2up. 
  13. Color Television RGB to PAL/NTSC Encoder MC1377. Motorola. 1995. https://digitalcompactcassette.github.io/Documentation/ITTSbox/MC1377P.pdf. 
  14. Croucher, Mel (1989). SAM Coupé Users' Manual. MILES GORDON TECHNOLOGY plc.. pp. 170. https://sam.speccy.cz/basic/sam-coupe_use-guide.pdf. 
  15. 15.0 15.1 15.2 Croucher, Mel (1989). SAM Coupé Users' Manual. MILES GORDON TECHNOLOGY plc.. pp. 87–89. https://sam.speccy.cz/basic/sam-coupe_use-guide.pdf. 
  16. Dooré, Dan. "Fonts". https://www.worldofsam.org/products/fonts. 
  17. Drissen, Stefan (2023-04-14), SAM MOD player, https://github.com/stefandrissen/SAM-MOD-player, retrieved 2023-04-17 
  18. "Home Page". http://www.samcoupe-pro-dos.co.uk/. 
  19. Dooré, Dan (May 2021). "Prototype". https://www.worldofsam.org/products/prototype. 
  20. Brown, Adrian (May 2018). "DPU". https://www.worldofsam.org/products/dpu. 
  21. Dooré, Dan. "KEdisk". https://www.worldofsam.org/products/kedisk. 
  22. Drissen, Stefan. "PC Suite". https://www.worldofsam.org/products/pc-suite. 
  23. Dooré, Dan. "SamBus". https://www.worldofsam.org/products/sambus. 
  24. Dooré, Dan (June 2018). "External PSU Modification". https://www.worldofsam.org/products/external-psu-modification. 
  25. "SAM Coupé - ZX128 - SNAPER". https://velesoft.speccy.cz/sam_zx128.htm. 

External links