Evaluation Assurance Level

Short description: Numerical grade assigned following Common Criteria

The Evaluation Assurance Level (EAL1 through EAL7) of an IT product or system is a numerical grade assigned following the completion of a Common Criteria security evaluation, an international standard in effect since 1999. The increasing assurance levels reflect added assurance requirements that must be met to achieve Common Criteria certification. The intent of the higher levels is to provide higher confidence that the system's principal security features are reliably implemented. The EAL level does not measure the security of the system itself, it simply states at what level the system was tested.

To achieve a particular EAL, the computer system must meet specific assurance requirements. Most of these requirements involve design documentation, design analysis, functional testing, or penetration testing. The higher EALs involve more detailed documentation, analysis, and testing than the lower ones. Achieving a higher EAL certification generally costs more money and takes more time than achieving a lower one. The EAL number assigned to a certified system indicates that the system completed all requirements for that level.

Although every product and system must fulfill the same assurance requirements to achieve a particular level, they do not have to fulfill the same functional requirements. The functional features for each certified product are established in the Security Target document tailored for that product's evaluation. Therefore, a product with a higher EAL is not necessarily "more secure" in a particular application than one with a lower EAL, since they may have very different lists of functional features in their Security Targets. A product's fitness for a particular security application depends on how well the features listed in the product's Security Target fulfill the application's security requirements. If the Security Targets for two products both contain the necessary security features, then the higher EAL should indicate the more trustworthy product for that application.

Assurance levels

EAL1: Functionally Tested

EAL1 is applicable where some confidence in correct operation is required, but the threats to security are not viewed as serious. It will be of value where independent assurance is required support the contention that due care has been exercised with respect to the protection of personal or similar information. EAL1 provides an evaluation of the TOE (Target of Evaluation) as made available to the customer, including independent testing against a specification, and an examination of the guidance documentation provided. It is intended that an EAL1 evaluation could be successfully conducted without assistance from the developer of the TOE, and for minimal cost. An evaluation at this level should provide evidence that the TOE functions in a manner consistent with its documentation, and that it provides useful protection against identified threats.

EAL2: Structurally Tested

EAL2 requires the cooperation of the developer in terms of the delivery of design information and test results, but should not demand more effort on the part of the developer than is consistent with good commercial practice. As such it should not require a substantially increased investment of cost or time. EAL2 is therefore applicable in those circumstances where developers or users require a low to moderate level of independently assured security in the absence of ready availability of the complete development record. Such a situation may arise when securing legacy systems.

EAL3: Methodically Tested and Checked

EAL3 permits a conscientious developer to gain maximum assurance from positive security engineering at the design stage without substantial alteration of existing sound development practices. EAL3 is applicable in those circumstances where developers or users require a moderate level of independently assured security, and require a thorough investigation of the TOE and its development without substantial re-engineering.

EAL4: Methodically Designed, Tested and Reviewed

EAL4 permits a developer to gain maximum assurance from positive security engineering based on good commercial development practices which, though rigorous, do not require substantial specialist knowledge, skills, and other resources. EAL4 is the highest level at which it is likely to be economically feasible to retrofit to an existing product line. EAL4 is therefore applicable in those circumstances where developers or users require a moderate to high level of independently assured security in conventional commodity TOEs and are prepared to incur additional security-specific engineering costs.

Commercial operating systems that provide conventional, user-based security features are typically evaluated at EAL4. Examples with expired Certificate are AIX, HP-UX, Oracle Linux, NetWare, Solaris, SUSE Linux Enterprise Server 9, SUSE Linux Enterprise Server 10, Red Hat Enterprise Linux 5, Windows 2000 Service Pack 3, Windows 2003, Windows XP, Windows Vista, Windows 7, Windows Server 2008 R2, z/OS version 2.1 and z/VM version 6.3.

Operating systems that provide multilevel security are evaluated at a minimum of EAL4. Examples with active Certificate include SUSE Linux Enterprise Server 15 (EAL 4+). Examples with expired Certificate are Trusted Solaris, Solaris 10 Release 11/06 Trusted Extensions, an early version of the XTS-400, VMware ESXi version 4.1, 3.5, 4.0, AIX 4.3, AIX 5L, AIX 6, AIX7, Red Hat 6.2 & SUSE Linux Enterprise Server 11 (EAL 4+). vSphere 5.5 Update 2 did not achieve EAL4+ level it was an EAL2+ and certified on June 30, 2015.

EAL5: Semiformally Designed and Tested

EAL5 permits a developer to gain maximum assurance from security engineering based upon rigorous commercial development practices supported by moderate application of specialist security engineering techniques. Such a TOE will probably be designed and developed with the intent of achieving EAL5 assurance. It is likely that the additional costs attributable to the EAL5 requirements, relative to rigorous development without the application of specialized techniques, will not be large. EAL5 is therefore applicable in those circumstances where developers or users require a high level of independently assured security in a planned development and require a rigorous development approach without incurring unreasonable costs attributable to specialist security engineering techniques.

Numerous smart card devices have been evaluated at EAL5, as have multilevel secure devices such as the Tenix Interactive Link. XTS-400 (STOP 6) is a general-purpose operating system which has been evaluated at EAL5 augmented.

LPAR on IBM System z is EAL5 Certified.

EAL6: Semiformally Verified Design and Tested

EAL6 permits developers to gain high assurance from application of security engineering techniques to a rigorous development environment in order to produce a premium TOE for protecting high-value assets against significant risks. EAL6 is therefore applicable to the development of security TOEs for application in high risk situations where the value of the protected assets justifies the additional costs.

Green Hills Software's INTEGRITY-178B RTOS has been certified to EAL6 augmented.

EAL7: Formally Verified Design and Tested

EAL7 is applicable to the development of security TOEs for application in extremely high risk situations and/or where the high value of the assets justifies the higher costs.

Practical application of EAL7 is currently limited to TOEs with tightly focused security functionality that is amenable to extensive formal analysis. The Tenix Interactive Link Data Diode Device and the Fox-IT Fox Data Diode (one-way data communications device) claimed to have been evaluated at EAL7 augmented (EAL7+).

Implications of assurance levels

Technically speaking, a higher EAL means nothing more, or less, than that the evaluation completed a more stringent set of quality assurance requirements. It is often assumed that a system that achieves a higher EAL will provide its security features more reliably (and the required third-party analysis and testing performed by security experts is reasonable evidence in this direction), but there is little or no published evidence to support that assumption.

Impact on cost and schedule

In 2006, the US Government Accountability Office published a report on Common Criteria evaluations that summarized a range of costs and schedules reported for evaluations performed at levels EAL2 through EAL4.

Range of completion times and costs for Common Criteria evaluations at EAL2 through EAL4.

In the mid to late 1990s, vendors reported spending United States dollar 1 million and even United States dollar 2.5 million on evaluations comparable to EAL4. There have been no published reports of the cost of the various Microsoft Windows security evaluations.

Augmentation of EAL requirements

In some cases, the evaluation may be augmented to include assurance requirements beyond the minimum required for a particular EAL. Officially this is indicated by following the EAL number with the word augmented and usually with a list of codes to indicate the additional requirements. As shorthand, vendors will often simply add a "plus" sign (as in EAL4+) to indicate the augmented requirements.

EAL notation

The Common Criteria standards denote EALs as shown in this article: the prefix "EAL" concatenated with a digit 1 through 7 (Examples: EAL1, EAL3, EAL5). In practice, some countries place a space between the prefix and the digit (EAL 1, EAL 3, EAL 5). The use of a plus sign to indicate augmentation is an informal shorthand used by product vendors (EAL4+ or EAL 4+).

External links

• GAO (March 2006). INFORMATION ASSURANCE: National Partnership Offers Benefits, but Faces Considerable Challenges. Report GAO-06-392. United States Government Accountability Office. http://www.gao.gov/new.items/d06392.pdf. Retrieved 2006-07-10. 

• Smith, Richard (October 2000). "Trends in Government Endorsed Security Product Evaluations". http://www.csrc.nist.gov/nissc/2000/proceedings/papers/032.pdf. Retrieved 2006-07-10. 
• CCEVS Validated Products List
• Common Criteria Assurance Level information from IACS
• Cisco Common Criteria Certifications
• IBM AIX operating system certifications
• Microsoft Windows and the Common Criteria Certification
• SUSE Linux awarded government security cert
• XTS-400 information
• Understanding the Windows EAL4 Evaluation
• Charu Chaubal (February 2007). Security Design of the VMware Infrastructure 3 Architecture. 20070215 Item: WP-013-PRD-01-01. VMware, Inc.. http://www.vmware.com/pdf/vi3_security_architecture_wp.pdf. Retrieved 2008-11-19. 

de:Evaluation Assurance Level