Pathfinding

From HandWiki
Short description: Plotting by a computer application
Equivalent paths between A and B in a 2D environment

Pathfinding or pathing is the plotting, by a computer application, of the shortest route between two points. It is a more practical variant on solving mazes. This field of research is based heavily on Dijkstra's algorithm for finding the shortest path on a weighted graph.

Pathfinding is closely related to the shortest path problem, within graph theory, which examines how to identify the path that best meets some criteria (shortest, cheapest, fastest, etc) between two points in a large network.

Algorithms

At its core, a pathfinding method searches a graph by starting at one vertex and exploring adjacent nodes until the destination node is reached, generally with the intent of finding the cheapest route. Although graph searching methods such as a breadth-first search would find a route if given enough time, other methods, which "explore" the graph, would tend to reach the destination sooner. An analogy would be a person walking across a room; rather than examining every possible route in advance, the person would generally walk in the direction of the destination and only deviate from the path to avoid an obstruction, and make deviations as minor as possible.

Two primary problems of pathfinding are (1) to find a path between two nodes in a graph; and (2) the shortest path problem—to find the optimal shortest path. Basic algorithms such as breadth-first and depth-first search address the first problem by exhausting all possibilities; starting from the given node, they iterate over all potential paths until they reach the destination node. These algorithms run in [math]\displaystyle{ O(|V|+|E|) }[/math], or linear time, where V is the number of vertices, and E is the number of edges between vertices.

The more complicated problem is finding the optimal path. The exhaustive approach in this case is known as the Bellman–Ford algorithm, which yields a time complexity of [math]\displaystyle{ O(|V||E|) }[/math], or quadratic time. However, it is not necessary to examine all possible paths to find the optimal one. Algorithms such as A* and Dijkstra's algorithm strategically eliminate paths, either through heuristics or through dynamic programming. By eliminating impossible paths, these algorithms can achieve time complexities as low as [math]\displaystyle{ O(|E|\log(|V|)) }[/math].[1]

The above algorithms are among the best general algorithms which operate on a graph without preprocessing. However, in practical travel-routing systems, even better time complexities can be attained by algorithms which can pre-process the graph to attain better performance.[2] One such algorithm is contraction hierarchies.

Dijkstra's algorithm

A common example of a graph-based pathfinding algorithm is Dijkstra's algorithm. This algorithm begins with a start node and an "open set" of candidate nodes. At each step, the node in the open set with the lowest distance from the start is examined. The node is marked "closed", and all nodes adjacent to it are added to the open set if they have not already been examined. This process repeats until a path to the destination has been found. Since the lowest distance nodes are examined first, the first time the destination is found, the path to it will be the shortest path.[3]

Dijkstra's algorithm fails if there is a negative edge weight. In the hypothetical situation where Nodes A, B, and C form a connected undirected graph with edges AB = 3, AC = 4, and BC = −2, the optimal path from A to C costs 1, and the optimal path from A to B costs 2. Dijkstra's Algorithm starting from A will first examine B, as that is the closest. It will assign a cost of 3 to it, and mark it closed, meaning that its cost will never be reevaluated. Therefore, Dijkstra's cannot evaluate negative edge weights. However, since for many practical purposes there will never be a negative edgeweight, Dijkstra's algorithm is largely suitable for the purpose of pathfinding.

A* algorithm

A* is a variant of Dijkstra's algorithm commonly used in games. A* assigns a weight to each open node equal to the weight of the edge to that node plus the approximate distance between that node and the finish. This approximate distance is found by the heuristic, and represents a minimum possible distance between that node and the end. This allows it to eliminate longer paths once an initial path is found. If there is a path of length x between the start and finish, and the minimum distance between a node and the finish is greater than x, that node need not be examined.[4]

A* uses this heuristic to improve on the behavior relative to Dijkstra's algorithm. When the heuristic evaluates to zero, A* is equivalent to Dijkstra's algorithm. As the heuristic estimate increases and gets closer to the true distance, A* continues to find optimal paths, but runs faster (by virtue of examining fewer nodes). When the value of the heuristic is exactly the true distance, A* examines the fewest nodes. (However, it is generally impractical to write a heuristic function that always computes the true distance, as the same comparison result can often be reached using simpler calculations – for example, using Chebyshev distance over Euclidean distance in two-dimensional space.) As the value of the heuristic increases, A* examines fewer nodes but no longer guarantees an optimal path. In many applications (such as video games) this is acceptable and even desirable, in order to keep the algorithm running quickly.

In video games

Chris Crawford in 1982 described how he "expended a great deal of time" trying to solve a problem with pathfinding in Tanktics, in which computer tanks became trapped on land within U-shaped lakes. "After much wasted effort I discovered a better solution: delete U-shaped lakes from the map", he said.[5]

Hierarchical path finding

Quadtrees can be used for hierarchical path finding

The idea was first described by the video game industry, which had a need for planning in large maps with a low amount of CPU time. The concept of using abstraction and heuristics is older and was first mentioned under the name ABSTRIPS (Abstraction-Based STRIPS)[6] which was used to efficiently search the state spaces of logic games.[7] A similar technique are navigation meshes (navmesh), which are used for geometrical planning in games and multimodal transportation planning which is utilized in travelling salesman problems with more than one transport vehicle.

A map is separated into clusters. On the high-level layer, the path between the clusters is planned. After the plan was found, a second path is planned within a cluster on the lower level.[8] That means, the planning is done in two steps which is a guided local search in the original space. The advantage is, that the number of nodes is smaller and the algorithm performs very well. The disadvantage is, that a hierarchical pathplanner is difficult to implement.[9]

Example

A map has a size of 3000x2000 nodes. Planning a path on a node base would take very long. Even an efficient algorithm will need to compute many possible graphs. The reason is, that such a map would contain 6 million nodes overall and the possibilities to explore the geometrical space are exceedingly large. The first step for a hierarchical path planner is to divide the map into smaller sub-maps. Each cluster has a size of 300x200 nodes. The number of clusters overall is 10x10=100. In the newly created graph the amount of nodes is small, it is possible to navigate between the 100 clusters, but not within the detailed map. If a valid path was found in the high-level-graph the next step is to plan the path within each cluster. The submap has 300x200 nodes which can be handled by a normal A* pathplanner easily.

Algorithms used in pathfinding

Multi-agent pathfinding

Main page: Multi-agent pathfinding

Multi-agent pathfinding is to find the paths for multiple agents from their current locations to their target locations without colliding with each other, while at the same time optimizing a cost function, such as the sum of the path lengths of all agents. It is a generalization of pathfinding. Many multi-agent pathfinding algorithms are generalized from A*, or based on reduction to other well studied problems such as integer linear programming.[10] However, such algorithms are typically incomplete; in other words, not proven to produce a solution within polynomial time. A different category of algorithms sacrifice optimality for performance by either making use of known navigation patterns (such as traffic flow) or the topology of the problem space.[11]

See also

References

  1. ↑ "7.2.1 Single Source Shortest Paths Problem: Dijkstra's Algorithm". http://lcm.csa.iisc.ernet.in/dsa/node162.html. 
  2. ↑ Delling, D. (2009). "Engineering route planning algorithms". Algorithmics of Large and Complex Networks: Design, Analysis, and Simulation. Lecture Notes in Computer Science. 5515. Springer. pp. 117–139. doi:10.1007/978-3-642-02094-0_7. ISBN 978-3-642-02093-3. 
  3. ↑ "5.7.1 Dijkstra Algorithm". http://students.ceid.upatras.gr/~papagel/project/kef5_7_1.htm. 
  4. ↑ "Introduction to A* Pathfinding". http://www.raywenderlich.com/4946/introduction-to-a-pathfinding. 
  5. ↑ Crawford, Chris (December 1982). "Design Techniques and Ideas for Computer Games". BYTE: 96. https://archive.org/stream/byte-magazine-1982-12/1982_12_BYTE_07-12_Game_Plan_1982#page/n97/mode/2up. Retrieved 19 October 2013. 
  6. ↑ Sacerdoti, Earl D (1974). "Planning in a hierarchy of abstraction spaces". Artificial Intelligence 5 (2): 115–135. doi:10.1016/0004-3702(74)90026-5. http://elvex.ugr.es/decsai/iaio/doc/1974%20ABSTRIPS.pdf. 
  7. ↑ Holte, Robert C and Perez, MB and Zimmer, RM and MacDonald, AJ (1995). "Hierarchical a*". Symposium on Abstraction, Reformulation, and Approximation. 
  8. ↑ Pelechano, Nuria and Fuentes, Carlos (2016). "Hierarchical path-finding for Navigation Meshes (HNA⁎)". Computers & Graphics 59: 68–78. doi:10.1016/j.cag.2016.05.023. https://upcommons.upc.edu/bitstream/handle/2117/98738/Pelechano_HNAstar_prePrint.pdf. 
  9. ↑ Botea, Adi and Muller, Martin and Schaeffer, Jonathan (2004). "Near optimal hierarchical path-finding". Journal of Game Development 1: 7–28. 
  10. ↑ Hang Ma, Sven Koenig, Nora Ayanian, Liron Cohen, Wolfgang Hoenig, T. K. Satish Kumar, Tansel Uras, Hong Xu, Craig Tovey, and Guni Sharon. Overview: generalizations of multi-agent path finding to real-world scenarios. In the 25th International Joint Conference on Artificial Intelligence (IJCAI) Workshop on Multi-Agent Path Finding. 2016.
  11. ↑ Khorshid, Mokhtar (2011). "A Polynomial-Time Algorithm for Non-Optimal Multi-Agent Pathfinding". SOCS. http://www.aaai.org/ocs/index.php/SOCS/SOCS11/paper/viewFile/4039/4361. 

External links



Retrieved from "https://handwiki.org/wiki/index.php?title=Pathfinding&oldid=3357225"