Physics:Rubber diode
In electronics, a rubber diode or VBE multiplier is a bipolar junction transistor circuit that serves as a voltage reference. It consists of one transistor and two resistors, and the reference voltage across the circuit is determined by the selected resistor values and the base-to-emitter voltage (VBE) of the transistor. The circuit behaves as a voltage divider, but with the voltage across the base-emitter resistor determined by the forward base-emitter junction voltage.
It is commonly used in the biasing of push-pull output stages of amplifiers, where one benefit is thermal compensation: The temperature-dependent variations in the multiplier's VBE, approximately -2.2 mV/°C, can be made to match variations occurring in the VBE of the power transistors by mounting to the same heat sink.[1] In this context, it is sometimes called a bias servo.[2]
References
- ↑ Crecraft, David; Gergely, Stephen (May 21, 2002). Analog Electronics. Butterworth-Heinemann. p. 188. ISBN 0080475833. https://books.google.com/books?id=lS7qN6iHyBYC&dq=vbe+multiplier&pg=PA188. Retrieved August 11, 2015.
- ↑ Elliott, Rod (27 Dec 2006). "Power Amplifier Design Guidelines". https://sound-au.com/amp_design.htm.
 |  |
