Software:Psion Series 7

From HandWiki
Psion Series 7
DeveloperPsion PLC
ManufacturerPsion PLC
Product familyPsion netBook
TypeSubnotebook
Release date2000; 24 years ago (2000)
Operating systemEPOC32
CPUStrongARM SA-1100
Memory16 – 32 MB
Removable storageCF II (Microdrive), PC Card
DisplayVGA
InputQWERTY keyboard, microphone
ConnectivityRS-232 serial port
PredecessorPsion Series 5

The Psion Series 7 is a subnotebook computer from Psion that was released in 2000. In size it is fairly original: larger than a palmtop or handheld machine, but smaller than a laptop computer. It was the first and last of the Psion series to have a full color electronic visual display. It has a leather-bound clamshell design, with a touch-sensitive, Video Graphics Array (VGA) resolution liquid-crystal display (LCD) and QWERTY computer keyboard. Internally it has a 132.71 MHz StrongARM SA-1100 processor, 16 (upgradable to 32) megabyte (MB) of random-access memory (RAM) and 16 MB of internal read-only memory (ROM).

The machine runs the EPOC operating system (OS), a predecessor of Symbian OS, and as such, can be programmed in the Open Programming Language (OPL), using the provided development program, or in C++ or Java, using a separate personal computer (PC) hosted development system. It can be synchronized to a PC by means of an RS-232 serial port to serial connector, a method that is obsoleted by later standards.

The unit has an expansion port for a CompactFlash (CF) II device such as the Hitachi Microdrive. It also has a PC Card expansion port supporting flash storage, compact flash adapters, modems,[1] wireless[2] and GPS[3] adapters. For data transfer between Psion computers, printers and to use mobile phones as modems the Series 7 features IrDA (infrared) connectivity.

The Series 7 is a variant of the Psion netBook, a machine aimed at the corporate market. Due to customer demand, the reduced capacity Series 7 was released, distinguished by replacing 16 MB of the 32 MB of RAM with a 16 MB ROM chip. Accessing the OS in ROM required slowing the processor down, leading to the false perception that the netBook and Series 7 used a different processor or printed circuit board (PCB). It is thus possible to convert a Series 7 to netBook configuration by replacing this memory card. However, at least two different (interchangeable) PCBs were used during the product's lifecycle, the later PCB distinguished by higher power output to the PC Card.

Included software

Linux on the Series 7

An open source project OpenPsion, formerly PsiLinux, aims to port Linux to the Psion Series 7, netBook, and other Psion PDAs.[4] Linux on the Series 7 rather struggles, given the Series 7's limited resources, but most PC Card (16-bit) adapters seem to be supported.

See also

References