Earth:Halocline

From HandWiki
Revision as of 02:45, 6 March 2023 by Scavis (talk | contribs) (change)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Short description: Stratification of a body of water due to salinity differences

In oceanography, a halocline (from Greek hals, halos 'salt' and klinein 'to slope') is a cline, a subtype of chemocline caused by a strong, vertical salinity gradient within a body of water.[1] Because salinity (in concert with temperature) affects the density of seawater, it can play a role in its vertical stratification. Increasing salinity by one kg/m3 results in an increase of seawater density of around 0.7 kg/m3.

Description

Halocline visible at the cenote Chac Mool, Mexico. The freshwater lies above the denser saltwater. In this photo, the visible water distortion from the halocline can be seen below the diver.

In the midlatitudes, an excess of evaporation over precipitation leads to surface waters being saltier than deep waters. In such regions, the vertical stratification is due to surface waters being warmer than deep waters and the halocline is destabilizing. Such regions may be prone to salt fingering, a process which results in the preferential mixing of salinity.

In certain high latitude regions (such as the Arctic Ocean, Bering Sea, and the Southern Ocean) the surface waters are actually colder than the deep waters and the halocline is responsible for maintaining water column stability, isolating the surface waters from the deep waters. In these regions, the halocline is important in allowing for the formation of sea ice, and limiting the escape of carbon dioxide to the atmosphere.

Haloclines are also found in fjords, and poorly mixed estuaries where fresh water is deposited at the ocean surface.[2]

A halocline can be easily created and observed in a drinking glass or other clear vessel. If fresh water is slowly poured over a quantity of salt water, using a spoon held horizontally at water-level to prevent mixing, a hazy interface layer, the halocline, will soon be visible due to the varying index of refraction across the boundary.

A halocline is most commonly confused with a thermocline – a thermocline is an area within a body of water that marks a drastic change in temperature. A halocline can coincide with a thermocline and form a pycnocline.[3]

Haloclines are common in water-filled limestone caves near the ocean. Less dense fresh water from the land forms a layer over salt water from the ocean.[1] For underwater cave explorers, this can cause the optical illusion of air space in caverns. Passing through the halocline tends to stir up the layers.

Graph

Plot of temperature and salinity in the Arctic Ocean at 85,18 north and 117,28 east dated Jan. 1st 2010.[4]

In the graphical representation, three layers can be discerned:

  • About 50 m (160 ft) of low salinity water "swimming" on top of the ocean. The temperature is −1.8 °C (28.8 °F), which is very near to the freezing point. This layer blocks heat transfer from the warmer, deeper levels into the sea ice, which has considerable effect on its thickness.
  • About 150 m (490 ft) of steeply rising salinity and increasing temperature. This is the actual halocline.
  • The deep layer with nearly constant salinity and slowly decreasing temperature.[4]

Other types of clines

See also

References