Chemistry:Bis-GMA
Names | |
---|---|
Preferred IUPAC name
Propane-2,2-diylbis[4,1-phenyleneoxy(2-hydroxypropane-3,1-diyl)] bis(2-methylprop-2-enoate) | |
Other names
Bowen monomer; Silux; Delton; NuvaSeal; Retroplast
| |
Identifiers | |
3D model (JSmol)
|
|
ChemSpider | |
EC Number |
|
PubChem CID
|
|
UNII | |
| |
| |
Properties | |
C29H36O8 | |
Molar mass | 512.599 g·mol−1 |
Appearance | colorless oil |
Hazards | |
GHS pictograms | |
GHS Signal word | Danger |
H315, H317, H318, H319 | |
P261, P264, P272, P280, P302+352, P305+351+338, P310, P321, P332+313, P333+313, P337+313, P362, P363, P501 | |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). | |
Infobox references | |
Bis-GMA (bisphenol A-glycidyl methacrylate) is a resin commonly used in dental composite, dental sealants.[1][2] and dental cement. It is the diester derived from methacrylic acid and the bisphenol A diglycidyl ether. Bearing two polymerizable groups, it is prone to form a crosslinked polymer that is used in dental restorations.[3] For dental work, highly viscous bis-GMA is mixed with aluminosilicate particles, crushed quartz and other related acrylates; changes to component ratios lead to different physical properties in the end product.[4] Bis-GMA was incorporated into composite dental resins in 1962 by Rafael Bowen.[3] Until matrix development work in the early 2000s, bis-GMA and related methacrylate monomers were the only options for organic matrix composition.[5]
Safety
Concerns have been raised about the potential for bis-GMA to break down into or be contaminated with the related compound bisphenol A.[6] However, no negative health effects of bis-GMA use in dental resins have been found.[2][7]
Composition
Salivary esterases can slowly degrade bis-GMA-based sealants, forming Bis-HPPP.[8]
References
- ↑ CID 15284 from PubChem. Retrieved 27 May 2022.
- ↑ 2.0 2.1 Ahovuo-Saloranta, Anneli; Forss, Helena; Walsh, Tanya; Nordblad, Anne; Mäkelä, Marjukka; Worthington, Helen V. (31 July 2017). "Pit and fissure sealants for preventing dental decay in permanent teeth". The Cochrane Database of Systematic Reviews 2017 (7): CD001830. doi:10.1002/14651858.CD001830.pub5. ISSN 1469-493X. PMID 28759120.
- ↑ 3.0 3.1 "Ullmann's Encyclopedia of Industrial Chemistry". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. 2006. doi:10.1002/14356007.a08_251.pub2.
- ↑ "Composite Materials: Composition, properties and clinical applications" (PDF). Schweiz Monatsschr Zahnmed 120 (11): 972–9. November 2010. PMID 21243545. https://www.sso.ch/pubmed.cfm?a=smfz-2010-11-30. Retrieved 28 May 2022.
- ↑ "New Resins for Dental Composites". Journal of Dental Research 96 (10): 1085–91. 21 July 2017. doi:10.1177/0022034517720658. PMID 28732183.
- ↑ "What every dentist should known about bisphenol A". General Dentistry 60 (5): 424–32. 2012. PMID 23032231.
- ↑ "Bis-GMA–based resins in dentistry: are they safe?". The Journal of the American Dental Association 130 (2): 201–209. February 1999. doi:10.14219/jada.archive.1999.0169. PMID 10036843.(Subscription content?)
- ↑ Shokati, Babak; Tam, Laura Eva; Santerre, J. Paul; Finer, Yoav (2010). "Effect of salivary esterase on the integrity and fracture toughness of the dentin-resin interface". Journal of Biomedical Materials Research Part B: Applied Biomaterials 94 (1): 230–7. doi:10.1002/jbm.b.31645. PMID 20524199.
Further reading
- Rochester, Johanna R. (30 August 2013). "Bisphenol A and human health: a review of the literature". Reproductive Toxicology 42: 132–155. doi:10.1016/j.reprotox.2013.08.008. PMID 23994667. https://www.sciencedirect.com/science/article/abs/pii/S0890623813003456.
Original source: https://en.wikipedia.org/wiki/Bis-GMA.
Read more |