Physics:Cubic foot

From HandWiki
Revision as of 05:53, 5 February 2024 by Nautica (talk | contribs) (fix)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Short description: Imperial and US customary (non-metric) unit of volume
cubic foot
Unit systemImperial and US Customary
Unit ofVolume
Symbolft3 or cu ft 
Conversions
1 ft3 in ...... is equal to ...
   US Customary   1728 in3
127 yd3
   SI units   0.02831685 m3

The cubic foot (symbol ft3 or cu ft)[1] is an imperial and US customary (non-metric) unit of volume, used in the United States and the United Kingdom. It is defined as the volume of a cube with sides of one foot (0.3048 m) in length. Its volume is 28.3168 L (about ​135 of a cubic metre).

Conversions

1 cubic foot  = 1728 cubic inches
= ​127 of a cubic yard
0.037037 yd3
= 0.028316846592 m3
= 28.316846592 L
= ​57677 US fluid gallons
7.4805 US fl gal
= ​7372877 US fluid ounces
957.5065 US fl oz
≈ 6.2288 imperial gallons
≈ 996.61 imperial fluid ounces
≈ 0.80356 US bushels
≈ 0.17811 oil barrel

Symbols and abbreviations

The IEEE symbol for the cubic foot is ft3.[1] The following abbreviations are used: cubic feet, cubic foot, cubic ft, cu feet, cu foot, cu ft, cu.ft, cuft, cb ft, cb.ft, cbft, cbf, feet3, foot3, ft3, feet/-3, foot/-3, ft/-3.[citation needed]

Larger multiples are in common usage in commerce and industry in the United States:

  • CCF or HCF: Centum (Latin hundred) cubic feet; i.e., 100 ft3
    • Used in the billing of natural gas and water delivered to households.
  • MCF: Mille (Latin thousand) cubic feet; i.e., 1000 ft3
  • MMCF: Mille mille cubic feet; i.e., 1000000 ft3
  • MMCFD: MMCF per day; i.e., 1000000 ft3/d
    • Used in the oil and gas industry.
  • BCF or TMC: Billion or thousand million cubic feet; i.e., 1000000000 ft3
    • TMC is usually used for referring to storage capacity and actual storage volume of storage dams.
  • TCF: Trillion cubic feet; i.e., 1000000000000 ft3
    • Used in the oil and gas industry.

Cubic foot per second and related flow rates

The IEEE symbol for the cubic foot per second is ft3/s.[1] The following other abbreviations are also sometimes used:

  • ft3/sec
  • cu ft/s
  • cfs or CFS
  • cusec
  • second-feet

The flow or discharge of rivers, i.e., the volume of water passing a location per unit of time, is commonly expressed in units of cubic feet per second or cubic metres per second.

Cusec is a unit of flow rate,[2] used mostly in the United States in the context of water flow, particularly of rivers and canals.

Conversions: 1 ft3s−1 = 0.0283168 m3/s = 28.3168 L/s = 1.699011 m3/min = 1,699.011 L/min

Cubic foot per minute

The IEEE symbol for the cubic foot per minute is ft3/min.[1] The following abbreviations are used:

  • cu ft/min
  • cufm
  • cfm or CFM
  • cfpm or CFPM

Cubic feet per minute is used to measure the amount of air that is being delivered, and is a common metric used for carburettors,[3] pneumatic tools, and air-compressor systems.[4]

Standard cubic foot

Main page: Physics:Standard cubic foot

A standard cubic foot (abbreviated scf) is a measure of quantity of gas, sometimes[clarification needed] defined in terms of standard temperature and pressure as a cubic foot of volume at 60 degrees Fahrenheit (15.56 °C; 288.71 K) and 14.7 pounds per square inch (PSI) (1.01 bar; 101.35 kPa) of pressure.[citation needed]

See also


References

ja:フィート#立方フィート