Chemistry:Ruddlesden-Popper phase

From HandWiki
Revision as of 00:00, 6 February 2024 by Raymond Straus (talk | contribs) (linkage)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Short description: Type of crystal structure

Ruddlesden-Popper (RP) phases are a type of perovskite structure that consists of two-dimensional perovskite-like slabs interleaved with cations. The general formula of an RP phase is An+1BnX3n+1, where A and B are cations, X is an anion (e.g., oxygen), and n is the number of octahedral layers in the perovskite-like stack.[1] Generally, it has a phase structure that results from the intergrowth of perovskite-type and NaCl-type (i.e., rocksalt-type) structures.

These phases are named after S.N. Ruddlesden and P. Popper, who first synthesized and described a Ruddlesden-Popper structure in 1957.[2][3]

The unit cell of Ruddlesden-Popper phases (a) Sr2RuO4 (n = 1) and (b) Sr3Ru2O7 (n = 2). The polyhedra are part of the perovskite-like layers. In these examples A = A’ = Sr2+.

Crystal structure

The general RP formula An+1BnX3n+1 can be written An-1A’2BnX3n+1, where A and A’ are alkali, alkaline earth, or rare earth metals and B is a transition metal. The A cations are located in the perovskite layer and are 12-fold cuboctahedral coordinated by the anions (CN = 12). The A’ cations have a coordination number of 9 (CN = 9) and are located at the boundary between the perovskite layer and an intermediate block layer. The B cations are located inside the anionic octahedra, pyramids and squares.[4]

Synthesis

The first series of Ruddlesden-Popper phases, Sr2TiO4, Ca2MnO4 and SrLaAlO4, were confirmed by powder X-ray diffraction (PXRD) in 1957.[2] These compounds were formed by heating up the appropriate oxides and carbonates in the correct proportions.

In recent years, interest in perovskite-like structures has been growing and methods for synthesizing these compounds have been further developed. In contrast to the conventional solid-state method, chimie douce or soft chemistry techniques are often utilized to synthesize this class of materials. These soft chemistry techniques include ion-exchange reactions of layered perovskites, ion-exchange reactions involving interlayer structural units, topochemical condensation reactions and other techniques such as intercalation-deintercalation reactions and multistep intercalation reactions of layer perovskite.[5]

Applications

Similar to the parent perovskite phases, Ruddlesden-Popper phases can possess interesting properties such as colossal magnetoresistance, superconductivity, ferroelectricity, catalytic activity,[6] white light emitting diodes,[7] scintillators,[8][9] fuel cell,[10] and solar cells.[11][12]

Using Ruddlesden-Popper perovskite as light-emitting diodes has the advantages of low-cost solution-processing, tunable bandgap, and better stability compared to 3D perovskite. In 2018, Mohite et al. achieved a 14 hours stable operation of 2D (CH3(CH2)3NH3)2(CH3NH3)n-1PbnI3n+1 Ruddlesden-Popper perovskite thin films as light-emitting diodes under operating conditions, while 3D perovskite as light-emitting diodes could degrade within minutes.[13]

The Ruddlesden-Popper phase LaSr3Fe3O10 is an example of a layered perovskite being developed for use in rechargeable metal-air batteries.[14] Due to the layered nature of Ruddlesden-Popper structures, the oxygen located between the perovskite layers is easily removed. The ease of removing the oxygen atoms is responsible for the efficiency of the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) in the material. In a metal-air battery, OER is the process of charging that occurs at the air electrode, while ORR is the discharging reaction.

The Ruddlesden-Popper phase perovskites are also prospective candidate materials in energy storage devices. The formula of (R-NH3)2An-1BnX3n+1 are being developed for solar cell. Here, R-NH3+ is long organic chain or cyclic ammonium cation, A is methylamine (MA) or formamidine (FA), B is Pb or Sn, and X is halogen ions.[12] The Ruddlesden-Popper perovskites can also be used for cathode materials of solid oxide fuel cells (SOFC)[10]

References

  1. ↑ Wells, A.F. (1984). Structural Inorganic Chemistry. Oxford: Clarendon. p. 602. ISBN 0-19-855370-6. 
  2. ↑ 2.0 2.1 Ruddlesden, S.N.; Popper, P. (1958). "The compound Sr3Ti2O7 and its structure". Acta Crystallogr. 11: 54–55. doi:10.1107/S0365110X58000128. 
  3. ↑ Ruddlesden, S.N.; Popper, P. (1957). "New compounds of the K2NiF4 type". Acta Crystallogr. 10 (8): 538–539. doi:10.1107/S0365110X57001929. 
  4. ↑ Beznosikov, B.V.; Aleksandrov, K.S. (2000). "Perovskite-like crystals of the Ruddlesden-Popper series". Crystallography Reports 45 (5): 792–798. doi:10.1134/1.1312923. Bibcode: 2000CryRp..45..792B. 
  5. ↑ Schaak, R.E.; Mallouk, T.E. (2002). "Perovskites by Design: A Toolbox of Solid-State Reactions.". Chemistry of Materials 14 (4): 1455–1471. doi:10.1021/cm010689m. 
  6. ↑ Shimizu, Ken-ichi; Itoh, Seiichiroh; Hatamachi, Tsuyoshi; Kodama, Tatsuya; Sato, Mineo; Toda, Kenji (2005-10-01). "Photocatalytic Water Splitting on Ni-Intercalated Ruddlesden−Popper Tantalate H2La2/3Ta2O7". Chemistry of Materials 17 (20): 5161–5166. doi:10.1021/cm050982c. ISSN 0897-4756. https://doi.org/10.1021/cm050982c. 
  7. ↑ D. Smith, Matthew; Karunadasa, Hemamala (20 February 2018). "White-Light Emission from Layered Halide Perovskites". Acc. Chem. Res. 51 (3): 619–627. doi:10.1021/acs.accounts.7b00433. PMID 29461806. 
  8. ↑ Birowosuto, Muhammad Danang (16 November 2016). "X-ray Scintillation in Lead Halide Perovskite Crystals". Sci. Rep. 6: 37254. doi:10.1038/srep37254. PMID 27849019. Bibcode: 2016NatSR...637254B. 
  9. ↑ Xie, Aozhen; Maddalena, Francesco; Witkowski, Marcin E.; Makowski, Michal; Mahler, Benoit; Drozdowski, Winicjusz; Springham, Stuart Victor; Coquet, Philippe et al. (2020-10-13). "Library of Two-Dimensional Hybrid Lead Halide Perovskite Scintillator Crystals". Chemistry of Materials 32 (19): 8530–8539. doi:10.1021/acs.chemmater.0c02789. ISSN 0897-4756. https://doi.org/10.1021/acs.chemmater.0c02789. 
  10. ↑ 10.0 10.1 Ding, Peipei; Li, Wenlu; Zhao, Hanwen; Wu, Congcong; Zhao, Li; Dong, Binghai; Wang, Shimin (2021-04-01). "Review on Ruddlesden–Popper perovskites as cathode for solid oxide fuel cells". Journal of Physics: Materials 4 (2): 022002. doi:10.1088/2515-7639/abe392. ISSN 2515-7639. Bibcode: 2021JPhM....4b2002D. 
  11. ↑ Tsai, H (August 2016). "High-efficiency two-dimensional Ruddlesden-Popper perovskite solar cells". Nature 536 (7616): 312–316. doi:10.1038/nature18306. PMID 27383783. Bibcode: 2016Natur.536..312T. 
  12. ↑ 12.0 12.1 Qiu, Jian; Zheng, Yiting; Xia, Yingdong; Chao, Lingfeng; Chen, Yonghua; Huang, Wei (2019). "Rapid Crystallization for Efficient 2D Ruddlesden-Popper (2DRP) Perovskite Solar Cells". Adv. Funct. Mater. 29 (47): 1806831. doi:10.1002/adfm.201806831. 
  13. ↑ Hsinhan, Tsai; Wanyi, Nie; Jean-Christophe, Blancon et al. (2018). "Stable Light-Emitting Diodes Using Phase-Pure Ruddlesden-Popper Layered Perovskites". Advanced Materials 30 (6): 1704217. doi:10.1002/adma.201704217. PMID 29314326. Bibcode: 2018AdM....3004217T. https://www.osti.gov/biblio/1467327. 
  14. ↑ Takeguchi, T.; Yamanaka, T.; Takahashi, H.; Watanabe, H.; Kuroki, T.; Nakanishi, H.; Orikasa, Y.; Uchimoto, Y. et al. (2013). "Layered Perovskite Oxide: A Reversible Air Electrode for Oxygen Evolution/Reduction in Rechargeable Metal-Air Batteries". Journal of the American Chemical Society 135 (30): 11125–11130. doi:10.1021/ja403476v. PMID 23802735. 



Retrieved from "https://handwiki.org/wiki/index.php?title=Chemistry:Ruddlesden-Popper_phase&oldid=3329587"