Action! (programming language)
 Fullscreen editor | |
| Original author(s) | Clinton Parker |
|---|---|
| Developer(s) | Optimized Systems Software |
| Initial release | August 1983 |
| Final release | v3.6
/ November 4, 1983 |
| Platform | Atari 8-bit family |
| Size | 16K bank-switched cartridge |
Action! is a procedural programming language and integrated development environment written by Clinton Parker for the Atari 8-bit family. The language, which is similar to ALGOL, compiles to high-performance code for the MOS Technology 6502 of the Atari computers. Action! was distributed on ROM cartridge by Optimized Systems Software starting in 1983. It was one of the company's first bank-switched 16 kB "Super Cartridges". The runtime library is stored in the cartridge; to make a standalone application requires the Action! Toolkit which was sold separately by OSS.
Parker, working with Henry Baker, had previously developed Micro-SPL, a systems programming language for the Xerox Alto. Action! is largely a port of Micro-SPL concepts to the Atari with changes to support the 6502 processor and the addition of an integrated fullscreen editor and debugger.
Action! was used to develop at least two commercial products—the HomePak productivity suite and Games Computers Play client program—and numerous programs in ANALOG Computing and Antic magazines. The editor inspired the PaperClip word processor. The language was not ported to other platforms.
The assembly language source code for Action! was made available under the GNU General Public License by the author in 2015.[1]
Development environment
Action! is one of the earlier examples of the OSS SuperCartridge format. ROM cartridges on the Atari were normally limited to 8 kB, which limited its ability to support larger programs. The SuperCartridge had 16 kB organized as four 4 kB blocks, two of which were visible at any time. The lower 4 kB did not change, and system could bank switch between the other three blocks by changing the value in address $AFFF.[2][3]
Action! used this design by breaking the system into four sections, the editor, the compiler, a monitor for testing code and switching between the editor and compiler, and the run-time library.[3] The run-time library is stored in the cartridge itself. To distribute standalone applications requires a separate run-time package which was sold by OSS as the Action! Toolkit.[4]
Action! constructs were designed to map cleanly to 6502 opcodes, to provide high performance without needing complex optimizations in the one-pass compiler.[5] For example, local variables are assigned fixed addresses in memory, instead of being allocated on a stack of activation records. This eliminates the significant overhead associated with stack management, which is especially difficult in the case of the 6502's 256-byte stack. However, this precludes the use of recursion.[4]
Unlike the integrated Atari BASIC and Atari Assembler Editor environments, the Action! editor does not use line numbers. It has a fullscreen, scrolling display capable of displaying two windows, and includes block operations and global search and replace.[4]
The monitor serves as a debugger, allowing an entire program or individual functions to be run, memory to be displayed and modified, and program execution to be traced.[4]
Language
Data types
Action! has three fundamental data types, all of which are numeric.
BYTE is internally represented as an unsigned 8-bit integer. Values range from 0 to 255.
The CHAR keyword can also be used to declare BYTE variables.
BYTE age=[21] ; declare age and initialize it to the value 21 BYTE leftMargin=82 ; declare leftMargin at address 82
CARDinal is internally represented as an unsigned 16-bit integer. Values range from 0 to 65,535.
CARD population=$600 ; declare population and store it at address 1536 and 1537 CARD prevYear, curYear, nextYear ; use commas to declare multiple variables
INTeger is internally represented as a signed 16-bit integer. Values range from -32,768 to 32,767.
INT veryCold = [-10]
INT profitsQ1, profitsQ2, ; declaring multiple variables can
profitsQ3, profitsQ4 ; span across multiple lines
Action! also has ARRAYs, POINTERs and user-defined TYPEs. No floating point support is provided.
An example of a user-defined TYPE:
TYPE CORD=[CARD x,y] CORD point point.x=42 point.y=23
Reserved words
A reserved word is any identifier or symbol that the Action! compiler recognizes as something special. It can be an operator, a data type name, a statement, or a compiler directive.
AND FI OR UNTIL = ( ARRAY FOR POINTER WHILE <> ) BYTE FUNC PROC XOR # . CARD IF RETURN + > [ CHAR INCLUDE RSH - >= ] DEFINE INT SET * < " DO LSH STEP / <= ' ELSE MOD THEN & $ ; ELSEIF MODULE TO % ^ EXIT OD TYPE ! @
Example code
The following is example code for Sieve of Eratosthenes written in Action!. In order to increase performance, it disables the ANTIC graphics coprocessor, preventing its DMA engine from "stealing" CPU cycles during computation.
BYTE RTCLOK=20, ; addr of sys timer
SDMCTL=559 ; DMA control
BYTE ARRAY FLAGS(8190)
CARD COUNT,I,K,PRIME,TIME
PROC SIEVE()
SDMCTL=0 ; shut off Antic
RTCLOK=0 ; reset the clock to zero
COUNT=0 ; init count
FOR I=0 TO 8190 ; and flags
DO
FLAGS(I)='T ; "'T" is a compiler-provided constant for True
OD
FOR I=0 TO 8190 ; now run the sieve
DO
IF FLAGS(I)='T THEN
PRIME=I+I+3
K=I+PRIME
WHILE K<=8190
DO
FLAGS(K)='F ; "'F" is a compiler-provided constant for False
K==+PRIME
OD
COUNT==+1
FI
OD
TIME=RTCLOK ; get timer reading
SDMCTL=34 ; restore screen
PRINTF("%E %U PRIMES IN",COUNT)
PRINTF("%E %U JIFFIES",TIME)
RETURN
History
Micro-SPL
While taking his postgraduate studies, Parker started working part-time at Xerox PARC working on printer drivers. He later moved to the Xerox Alto project where he wrote several games for the system.[6] His PhD was in natural language parsing and he had worked on compiler theory during his graduate work.[7]
Henry Baker and Parker released Micro-SPL in September 1979. Micro-SPL was intended to be used as a systems programming language on the Xerox Alto workstation computer, which was normally programmed in BCPL. The Alto used a microcode system which the BCPL compiler output. Micro-SPL output the same format, allowing BCPL programs to call Micro-SPL programs.[8]
Aside from differences in syntax, the main difference between Micro-SPL and BCPL, and the reason for its existence, was that Micro-SPL produced code that was many times faster than the native BCPL compiler. In general, Micro-SPL programs were expected to run about ten times as fast as BCPL, and about half as fast as good hand-written microcode. In comparison to microcode, they claimed it would take half as long to write and 10% of the time to debug it.[8]
Action!
It was during this period that Parker purchased an Atari computer for use at home. He was disappointed with the lack of development systems for it, which was the impetus for creating Action![9] Parker considered releasing the system himself, but decided to partner with Optimized Systems Software (OSS) for sales and distribution. OSS focused on utilities and programming languages like BASIC XL, so this was a natural fit for Action![10] Sales were strong enough for Parker to make a living off the royalties for several years.[11]
The IBM PC had C compilers available, and Parker decided there was no point in porting Action! to that platform.[12] As the sales of the Atari 8-bit computers wound down in North America, OSS wound down as well. Late in its history Action! distribution moved from OSS to Electronic Arts, but they did little with the language and sales ended shortly after.[13] In a 2015 interview, Parker expressed his surprise in the level of interest in the language continued to receive, suggesting it was greater than it had been in the late 1980s.[14]
Reception
Brian Moriarty, in a February 1984 review for ANALOG Computing, concluded that Action! was "one of the most valuable development tools ever published for the Atari." He cited the manual as the only weak point of the package, claiming it "suffers from lack of confidence, uncertain organization and a shortage of good, hard technical data."[15]
Leo Laporte reviewed Action in the May/June 1984 edition of Hi-Res. He began the review, "This is the best thing to happen to Atari since Nolan Bushnell figured out people would play ping-pong on a TV screen." Laporte praised the editor, noting its split-screen and cut and paste capabilities and describing it as a "complete word processing system that's very responsive." He said that Action! ran about 200 times as fast as Atari BASIC, concluding that "This language is like a finely tuned racing car."[16]
BYTE in 1985 praised the compilation and execution speed of software written in Action! Using their Byte Sieve benchmark as a test, ten iterations of the sieve completed in 18 seconds in Action!, compared to 10 seconds for assembly and 38 minutes in BASIC. The magazine also lauded the language's editor. BYTE reported that the language resembled C closely enough to "routinely convert programs between the two", and approved of its pointer support. The magazine concluded that "Action! is easy to use, quick, and efficient. It can exploit the Atari's full power. Action! puts programming for the Atari in a whole new dimension."[17]
Ian Chadwick wrote in Mapping the Atari that "Action! is probably the best language yet for the Atari; it's a bit like C and Pascal, with a dash of Forth. I recommend it."[18]
References
Citations
- ↑ Action! Source Code - Page 2, Alfred (Chopper Commander) Posted Mon Feb 2, 2015 1:38 PM, AtariAge Forums, This is the original Action! source as I received it from ICD. It uses the ICD cross assembler which is not included in the zip. It can be easily converted to other formats
- ↑ "RAM/ROM Control On An XL/XE Computer". https://atariwiki.org/wiki/Wiki.jsp?page=Cartridges.
- ↑ 3.0 3.1 Moriarty 1984, p. 55.
- ↑ 4.0 4.1 4.2 4.3 Moriarty 1984.
- ↑ ACTION! in Atariki (PL)
- ↑ Parker 2015, 6:00.
- ↑ Parker 2015, 6:30.
- ↑ 8.0 8.1 Baker & Parker 1979, p. 1.
- ↑ Parker 2015, 7:00.
- ↑ Parker 2015, 28:00.
- ↑ Parker 2015, 20:00.
- ↑ Parker 2015, 21:30.
- ↑ Parker 2015, 2:45.
- ↑ Parker 2015, 1:00.
- ↑ Moriarty 1984, p. 60.
- ↑ Laport, Leo (May–June 1984). "Lights, Camera, ACTION!". Hi-Res: 72. https://www.atarimagazines.com/hi-res/v1n4/action.php.
- ↑ Schneeflock, Ed (March 1985). "Action! A Poor Man's C?". BYTE: pp. 273. https://archive.org/stream/byte-magazine-1985-03-rescan/1985_03_BYTE_10-03_Bargain_Computing#page/n283/mode/2up.
- ↑ Chadwick, Ian (1985). "Author's Preface To The Revised Edition". Mapping the Atari. Greensboro, North Carolina: Compute! Publications, Inc.. pp. v-vi. ISBN 0-87455-004-1. http://www.atariarchives.org/mapping/revisedpreface.php.
Bibliography
- Parker, Clinton (31 December 2015). "ANTIC Interview 111, Clinton Parker, Action!" (podcast). Interviewed by Randy Kindig.
- Moriarty, Brian (February 1984). "Action! - A new language for the Atari!". ANALOG Computing (16): 54–61. https://archive.org/details/analog-computing-magazine-16/page/n5.
External links
- Action! (programming language) on SourceForge.net
- Action! Programming Language Version 3.6 - Source Code, by Optimized Systems Software at archive.org
- Action! info at Retrobits.com
- Action! Archive
- Action! reference manual
- Effectus cross-compiler
 |  |
