Chemistry:Aryne

From HandWiki
(Redirected from Chemistry:Benzyne)
Short description: Organic compound made by removing substituents from an aromatic ring

In organic chemistry, arynes[1] and benzynes[2] are a class of highly reactive chemical species derived from an aromatic ring by removal of two substituents. Arynes are examples of didehydroarenes (1,2-didehydroarenes in this case), although 1,3- and 1,4-didehydroarenes are also known.[3][4][5] Arynes are examples of alkynes under high strain.

Bonding in arynes

The alkyne representation of benzyne is the most widely encountered. Arynes are usually described as having a strained triple bond.[6]

File:Resonance contributors1.tif

Geometric constraints on the triple bond in benzyne result in diminished overlap of in-plane p-orbitals, and thus weaker triple bond.[7] The vibrational frequency of the triple bond in benzyne was assigned by Radziszewski to be 1846 cm−1,[8] indicating a weaker triple bond than in unstrained alkyne with vibrational frequency of approximately 2150 cm−1. Nevertheless, benzyne is more like a strained alkyne than a diradical, as seen from the large singlet–triplet gap and alkyne-like reactivity.[3]

File:Geometric constraint2.tif

The LUMO of aryne lies much lower than the LUMO of unstrained alkynes, which makes it a better energy match for the HOMO of nucleophiles. Hence, benzyne possesses electrophilic character and undergoes reactions with nucleophiles.[9] A detailed MO analysis of benzyne was presented in 1968.[10]

File:Homo-lumo gap.tif

Generation of arynes

Due to their extreme reactivity, arynes must be generated in situ. Typical of other reactive intermediates, benzyne must be trapped, otherwise it dimerises to biphenylene.

Early routes to benzyne involved dehydrohalogenation of aryl halides: File:Benzyne gen1.tif Such reactions require strong base and high temperatures. 1,2-Disubstituted arenes serve as precursors to benzynes under milder conditions. Benzyne is generated by the dehalogenation of 1-bromo-2-fluorobenzene by magnesium.[11] Anthranilic acid can be converted to 2-diazoniobenzene-1-carboxylate by diazotization and neutralization. Although explosive,[12] this zwitterionic species is a convenient and inexpensive precursor to benzyne.[13]

File:Benzyne gen2.tif

Another method is based on trimethylsilylaryl triflates.[14] Fluoride displacement of the trimethylsilyl group induces elimination of triflate and release of benzyne:

File:Benzyne gen3.tif

A hexadehydro Diels-Alder reaction (HDDA) involves cycloaddition of 1,3-diyne and alkyne.[15]

File:HDDA rxn.tif

N-amination of 1H-benzotriazole with hydroxylamine-O-sulfonic acid generates an intermediate which can be oxidised to benzyne in almost quantitative yield with lead(IV) acetate.[16]

Benzyne Generated from 1H-Benzotriazole.png

Reactions of arynes

Even at low temperatures arynes are extremely reactive. Their reactivity can be classified in three main classes: (1) nucleophilic additions, (2) pericyclic reactions, and (3) bond-insertion.

Nucleophilic additions to arynes

Upon treatment with basic nucleophiles, aryl halides deprotonate alpha to the leaving group, resulting in dehydrohalogenation. Isotope exchange studies indicate that for aryl fluorides and, sometimes, aryl chlorides, the elimination event proceeds in two steps, deprotonation, followed by expulsion of the nucleophile. Thus, the process is formally analogous to the E1cb mechanism of aliphatic compounds. Aryl bromides and iodides, on the other hand, generally appear to undergo elimination by a concerted syn-coplanar E2 mechanism.[17][18] The resulting benzyne forms addition products, usually by nucleophilic addition and protonation. Generation of the benzyne intermediate is the slow step in the reaction.[19]

File:Nuc addn to benzyne.tif

"Aryne coupling" reactions allow for generation of biphenyl compounds which are valuable in pharmaceutical industry, agriculture and as ligands in many metal-catalyzed transformations.[20]

File:Cross-coupling of arynes.tif

The metal–arene product can also add to another aryne, leading to chain-growth polymerization. Using copper(I) cyanide as the initiator to add to the first aryne yielded polymers containing up to about 100 arene units.[21]

When leaving group (LG) and substituent (Y) are mutually ortho or para, only one benzyne intermediate is possible. However, when LG is meta to Y, then regiochemical outcomes (A and B) are possible. If Y is electron withdrawing, then HB is more acidic than HA resulting in regioisomer B being generated. Analogously, if Y is electron donating, regioisomer A is generated, since now HA is the more acidic proton.

Triple bond generation1.png

There are two possible regioisomers of benzyne with substituent (Y): triple bond can be positioned between C2 and C3 or between C3 and C4. Substituents ortho to the leaving group will lead to the triple bond between C2 and C3. Para Y and LG will lead to regioisomer with triple bond between C3 and C4. Meta substituent can afford both regioisomers as described above. In case of triple bond located between C2 and C3, electron withdrawing (EWG) substituents, e.g. CF3, will direct the nucleophile addition to place carbanion as close as possible to EWG. However, electron donating (EDG) substituents, e.g. CH3, will provide little selectivity between products. In the regioisomer where triple bond is located between C3 and C4 the effect of substituent on nucleophile addition is diminished, and mixtures of para and meta products are often obtained.[19]

Regiochemistry2.png

Pericyclic reactions of arynes

Benzyne undergoes rapid dimerization to form biphenylene. Some routes to benzyne lead to especially rapid and high yield of this subsequent reaction.[13][16] Trimerization gives triphenylene.[22]

Benzynes can undergo [4+2] cyclization reactions. When generated in the presence of anthracene, trypticene results.[11] In this method, the concerted mechanism of the Diels-Alder reaction between benzyne and furan is shown below. Other benzyne [4+2] cycloadditions are thought to proceed via a stepwise mechanism.

4+2 cycloaddition.svg

A classic example is the synthesis of 1,2,3,4-tetraphenylnaphthalene.[23] Tetrabromobenzene can react with butyllithium and furan to form a tetrahydroanthracene[24]

diaryne reaction with furan

[4+2] cycloadditions of arynes have been commonly applied to natural product total synthesis. The main limitation of such approach, however, is the need to use constrained dienes, such as furan and cyclopentadiene.[14] In 2009 Buszek and co-workers synthesized herbindole A using aryne [4+2]-cycloaddition.[25] 6,7-indolyne undergoes [4+2] cycloaddition with cyclopentadiene to afford complex tetracyclic product.

File:Buszek.tif

Benzynes undergo [2+2] cycloaddition with a wide range of alkenes. Due to electrophilic nature of benzyne, alkenes bearing electron-donating substituents work best for this reaction.[26]

Due to significant byproduct formation, aryne [2+2] chemistry is rarely utilized in natural product total synthesis.[14] Nevertheless, several examples do exist. In 1982, Stevens and co-workers reported a synthesis of taxodione that utilized [2+2] cycloaddition between an aryne and a ketene acetal.[27]

File:Stevens.tif

Mori and co-workers performed a palladium-catalyzed [2+2+2]-cocyclization of aryne and diyne in their total synthesis of taiwanins C.[28]

File:Mori.tif

Bond-insertion reactions of arynes

The first example of aryne σ-bond insertion reaction is the synthesis of melleine in 1973.[29] File:Guyot.tif

Other dehydrobenzenes

If benzyne is 1,2-didehydrobenzene, two further isomers are possible: 1,3-didehydrobenzene and 1,4-didehydrobenzene.[3] Their energies in silico are, respectively, 106, 122, and 138 kcal/mol (444, 510 and 577 kJ/mol).[30] The 1,2- and 1,3- isomers have singlet ground states, whereas for 1,4-didehydrobenzene the gap is smaller.

Benzynes o, m, and p.svg

The interconversion of the 1,2-, 1,3- and 1,4-didehydrobenzenes has been studied.[30][31] A 1,2- to 1,3-didehydrobenzene conversion has been postulated to occur in the pyrolysis (900 °C) of the phenyl substituted aryne precursors[30] as shown below. Extremely high temperatures are required for benzyne interconversion.

File:Interconversion.tif

1,4-Didehydroarenes

In classical 1,4-didehydrobenzene experiments, heating to 300 °C, [1,6-D2]-A readily equilibrates with [3,2-D2]-B, but does not equilibrate with C or D. The simultaneous migration of deuterium atoms to form B, and the fact that none of C or D is formed can only be explained by a presence of a cyclic and symmetrical intermediate–1,4-didehydrobenzene.[32] File:Bergman.tif

Two states were proposed for 1,4-didehydrobenzene: singlet and triplet, with the singlet state lower in energy.[33][34] Triplet state represents two noninteracting radical centers, and hence should abstract hydrogens at the same rate as phenyl radical. However, singlet state is more stabilized than the triplet, and therefore some of the stabilizing energy will be lost in order to form the transition state for hydrogen cleavage, leading to slower hydrogen abstraction. Chen proposed the use of 1,4-didehydrobenzene analogues that have large singlet-triplet energy gaps to enhance selectivity of enediyne drug candidates.[35]

History

The first evidence for arynes came from the work of Stoermer and Kahlert. In 1902 they observed that upon treatment of 3-bromobenzofuran with base in ethanol 2-ethoxybenzofuran is formed. Based on this observation they postulated an aryne intermediate.[36]

First indication of benzyne.

Wittig et al. invoked zwitterionic intermediate in the reaction of fluorobenzene and phenyllithium to give biphenyl.[37][38][39] This hypothesis was later confirmed.[40][41][42][43][44]

File:Wittig.tif

In 1953 14C labeling experiments provided strong support for the intermediacy of benzyne.[40] John D. Roberts et al. showed that the reaction of chlorobenzene-1-14C and potassium amide gave equal amounts of aniline with 14C incorporation at C-1 and C-2.

14C labeling experiment shows equal distribution of products.

Wittig and Pohmer found that benzyne participate in [4+2] cycloaddition reactions.[45]

Capture of benzyne as dienophile in Diels-Alder reaction.

Additional evidence for the existence of benzyne came from spectroscopic studies.[3] Benzyne has been observed in a "molecular container".[46]

In 2015, a single aryne molecule was imaged by STM.[47]

1,3-Didehydroarenes was first demonstrated in the 1990s when it was generated from 1,3-disubstituted benzene derivatives, such as the peroxy ester 1,3-C6H4(O2C(O)CH3)2.[3]

Breakthroughs on 1,4-didehydrobenzene came in the 1960s, followed from studies on the Bergman cyclization.[32] This theme became topical with the discovery of enediyne "cytostatics", such as calicheamicin, which generates a 1,4-didehydrobenzene.[48]

Examples of benzynes in total synthesis

A variety of natural products have been prepared using arynes as intermediates.[14] Nucleophilic additions to arynes have been widely used in natural product total synthesis. Indeed, nucleophilic additions of arynes are some of the oldest known applications of aryne chemistry.[14] Nucleophilic addition to aryne was used in the attempted synthesis of cryptaustoline (1) and cryptowoline (2).[49] File:Kametani1.tif

The synthesis of the tetracyclic meroterpenoid (+)-liphagal involved an aryne intermediate.[50] Their approach employed an aryne cyclization to close the final ring of the natural product.[14]

File:Stoltz Liphagal.tif

Multicomponent reactions of arynes are powerful transformations that allow for rapid formation of 1,2-disubstituted arenes. Despite their potential utility, examples of multicomponent aryne reactions in natural product synthesis are scarce.[14] A four-component aryne coupling reaction was employed in the synthesis of dehydroaltenuene B.[51]

File:Barrette synthesis.tif

See also

References

  1. IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version:  (2006–) "Aryne". doi:10.1351/goldbook.A00465
  2. IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version:  (2006–) "Benzynes". doi:10.1351/goldbook.B00634
  3. 3.0 3.1 3.2 3.3 3.4 Hans Henning Wenk; Michael Winkler; Wolfram Sander (2003). "One Century of Aryne Chemistry". Angew. Chem. Int. Ed. 42 (5): 502–528. doi:10.1002/anie.200390151. PMID 12569480. 
  4. IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version:  (2006–) "Dehydroarenes". doi:10.1351/goldbook.D01574
  5. IUPAC Gold Book entry for "benzynes" identifies "m-benzyne" and "p-benzyne" as erroneous terms for 1,3- and 1,4-didehydrobenzene
  6. Anslyn, E. V.; Dougherty, D. A.: Modern Physical Organic Chemistry, University Science Books, 2006, p612.
  7. Gampe, C. M.; Carreira, E. M. (2012). "Arynes and Cyclohexyne in Natural Product Synthesis". Angew. Chem. Int. Ed. Engl. 51 (16): 3766–78. doi:10.1002/anie.201107485. PMID 22422638. 
  8. Radziszewski, J. G.; Hess, Jr. B. A.; Zahradnik, R. (1992). "Infrared Spectrum of o-Benzyne: Experiment and Theory". J. Am. Chem. Soc. 114: 52. doi:10.1021/ja00027a007. 
  9. Gilchrist, T. L. Supplement C: The Chemistry of Triple Bonded Functional Groups, Part 1. Patai, S.; Rappaport, Z. Eds., John Wiley & Sons, New York, 1983
  10. Hoffmann, R.; Imamura, A.; Hehre, W. J. (1968). "Benzynes, dehydroconjugated molecules, and the interaction of orbitals separated by a number of intervening sigma bonds". J. Am. Chem. Soc. 90 (6): 1499. doi:10.1021/ja01008a018. 
  11. 11.0 11.1 Wittig, Georg (1959). "Triptycene". Org. Synth. 39: 75. doi:10.15227/orgsyn.039.0075. 
  12. Sullivan, John M. (1971-06-01). "Explosion during preparation of benzenediazonium-2-carboxylate hydrochloride". Journal of Chemical Education 48 (6): 419. doi:10.1021/ed048p419.3. ISSN 0021-9584. Bibcode1971JChEd..48..419S. 
  13. 13.0 13.1 Logullo, Francis M.; Seitz, Arnold M.; Friedman, Lester (1968). "Benzenediazonium-2-Carboxylate and Biphenylene (Benzenediazonium, o-carboxy-, hydroxide, inner salt)". Org. Synth. 48: 12. doi:10.15227/orgsyn.048.0012. 
  14. 14.0 14.1 14.2 14.3 14.4 14.5 14.6 Tadross, P. M.; Stoltz, B. M. (2012). "A Comprehensive History of Arynes in Natural Product Total Synthesis". Chem. Rev. 112 (6): 3550–3577. doi:10.1021/cr200478h. PMID 22443517. 
  15. Hoye, T. R.; Baire, B.; Niu, D.; Willoughby, P. H.; Woods, B. P. (2012). "The hexadehydro-Diels–Alder reaction". Nature 490 (7419): 208–212. doi:10.1038/nature11518. PMID 23060191. Bibcode2012Natur.490..208H. 
  16. 16.0 16.1 Campbell, C.D.; C.W. Rees (1969). "Reactive intermediates. Part I. Synthesis and oxidation of 1- and 2-aminobenzotriazole". J. Chem. Soc. C 1969 (5): 742–747. doi:10.1039/J39690000742. 
  17. Panar, Manuel (1961). The Elimination-Addition Mechanism of Nucleophilic Aromatic Substitution. Pasadena, CA: California Institute of Technology (Ph.D. Thesis). pp. 4–5. 
  18. H., Lowry, Thomas (1987). Mechanism and theory in organic chemistry. Richardson, Kathleen Schueller (3rd ed.). New York: Harper & Row. pp. 643. ISBN 0-06-044084-8. OCLC 14214254. https://archive.org/details/mechanismtheoryi000321/page/643. 
  19. 19.0 19.1 Anslyn, E. V.; Dougherty, D. A. Modern Physical Organic Chemistry. University Science Books, 2006
  20. Diemer, V.; Begaut, M.; Leroux, F. R.; Colobert, F. Eur. J. Org. Chem. 2011, 341
  21. Mizukoshi, Yoshihide; Mikami, Koichiro; Uchiyama, Masanobu (2015). "Aryne Polymerization Enabling Straightforward Synthesis of Elusive Poly(ortho-arylene)s". J. Am. Chem. Soc. 137 (1): 74–77. doi:10.1021/ja5112207. PMID 25459083. 
  22. Heaney, H.; Millar, I. T. (1960). "Triphenylene". Organic Syntheses 40: 105. http://www.orgsyn.org/demo.aspx?prep=CV5P1120. ; Collective Volume, 5, 1973, pp. 1120 
  23. "1,2,3,4-Tetraphenylnaphthalene". Organic Syntheses 46: 107. 1966. doi:10.15227/orgsyn.046.0107. 
  24. "Use of 1,2,4,5-Tetrabromobenzene as a 1,4-Nenzadiyne Equivalent: Anti- and Syn-1,4,5,8-tetrahydroanthracene 1,4:5,8-diepoxides". Organic Syntheses 75: 201. 1998. doi:10.15227/orgsyn.075.0201. 
  25. Buszek, K. R.; Brown, N.; Kuo, D. (2009). "Concise Total Synthesis of (±)-cis-Trikentrin A and (±)-Herbindole A via Intermolecular Indole Aryne Cycloaddition". Org. Lett. 11 (1): 201–204. doi:10.1021/ol802425m. PMID 19055375. 
  26. Pellissier, H.; Santelli, M. Tetrahedron, 2003; 59, 701
  27. Stevens, R. V.; Bisacchi, G. S. J. Org, Chem. 1982; 47, 2396
  28. Sato, Y.; Tamura,T.; Mori, M. Angew. Chem. Int. Ed. 2004; 43, 2436
  29. Guyot, M.; Molho, D. Tetrahedron Lett. 1973; 14, 3433
  30. 30.0 30.1 30.2 Blake, M. E.; Bartlett, K. L.; Jones, M. Jr (2003). "A m-Benzyne to o-Benzyne Conversion Through a 1,2-Shift of a Phenyl Group". J. Am. Chem. Soc. 125 (21): 6485–90. doi:10.1021/ja0213672. PMID 12785789. 
  31. Polishchuk, A. L.; Bartlett, K. L.; Friedman, L. A.; Jones, M. Jr (2004). "A p-Benzyne to m-Benzyne Conversion Through a 1,2-Shift of a Phenyl Group. Completion of the Benzyne Cascade". J. Phys. Org. Chem. 17 (9): 798–806. doi:10.1002/poc.797. 
  32. 32.0 32.1 Richard R. Jones; Robert G. Bergman (1972). "p-Benzyne. Generation as an intermediate in a thermal isomerization reaction and trapping evidence for the 1,4-benzenediyl structure". J. Am. Chem. Soc. 94 (2): 660–661. doi:10.1021/ja00757a071. 
  33. Clauberg, H.; Minsek, D. W.; Chen, P. (1992). "Mass and photoelectron spectroscopy of C3H2. .DELTA.Hf of singlet carbenes deviate from additivity by their singlet-triplet gaps". J. Am. Chem. Soc. 114: 99. doi:10.1021/ja00027a014. 
  34. Blush, J. A.; Clauberg, H.; Kohn, D. W.; Minsek, D. W.; Zhang, X.; Chen, P. (1992). "Photoionization mass and photoelectron spectroscopy of radicals, carbenes, and biradicals". Acc. Chem. Res. 25 (9): 385. doi:10.1021/ar00021a001. 
  35. Chen, P (1996). "Design of Diradical-based Hydrogen Abstraction Agents". Angew. Chem. Int. Ed. Engl. 35 (1314): 1478. doi:10.1002/anie.199614781. 
  36. Stoermer, R.; Kahlert, B. (1902). "Ueber das 1- und 2-Brom-cumaron". Berichte der Deutschen Chemischen Gesellschaft 35 (2): 1633–1640. doi:10.1002/cber.19020350286. https://zenodo.org/record/1426054. 
  37. Wittig, G.; Pieper, G.; Fuhrmann, G. (1940). "Über die Bildung von Diphenyl aus Fluorbenzol und Phenyl-lithium (IV. Mitteil. über Austauschreaktionen mit Phenyl-lithium)". Berichte der Deutschen Chemischen Gesellschaft (A and B Series) 73 (11): 1193–1197. doi:10.1002/cber.19400731113. 
  38. Wittig, Georg (1942). "Phenyl-lithium, der Schlüssel zu einer neuen Chemie metallorganischer Verbindungen". Die Naturwissenschaften 30 (46–47): 696–703. doi:10.1007/BF01489519. Bibcode1942NW.....30..696W. 
  39. Wittig, G (1954). "Fortschritte auf dem Gebiet der organischen Aniono-Chemie". Angewandte Chemie 66 (1): 10–17. doi:10.1002/ange.19540660103. Bibcode1954AngCh..66...10W. 
  40. 40.0 40.1 Roberts, John D. (1953). "Rearrangement in the Reaction of Chlorobenzene-1-C14With Potassium Amide1". Journal of the American Chemical Society 75 (13): 3290–3291. doi:10.1021/ja01109a523. 
  41. Roberts, John D. (1956). "The Mechanism of Aminations of Halobenzenes 1". Journal of the American Chemical Society 78 (3): 601–611. doi:10.1021/ja01584a024. 
  42. Roberts, John D. (1956). "Orientation in Aminations of Substituted Halobenzenes 1". Journal of the American Chemical Society 78 (3): 611–614. doi:10.1021/ja01584a025. 
  43. Modern Arylation Methods. Edited by Lutz Ackermann 2009 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim ISBN:978-3-527-31937-4
  44. Heaney, H. (1962). "The Benzyne and Related Intermediates.". Chemical Reviews 62 (2): 81–97. doi:10.1021/cr60216a001. 
  45. Wittig, G.; Pohmer, L. Angew. Chem. 1955; 67(13), 348.
  46. Warmuth, R.; Yoon (2001). "Recent highlights in hemicarcerand chemistry". Acc. Chem. Res. 34 (2): 96. doi:10.1021/ar980082k. PMID 11263868. 
  47. On-surface; Pérez, E.Guitián; Peña, L.Gross (2015). "On-surface generation and imaging of arynes by atomic force microscopy". Nature Chemistry 7 (8): 623–8. doi:10.1038/nchem.2300. PMID 26201737. Bibcode2015NatCh...7..623P. 
  48. Galm, U; Hager, MH; Van Lanen, SG; Ju, J; Thorson, JS; Shen, B (Feb 2005). "Antitumor antibiotics: bleomycin, enediynes, and mitomycin". Chemical Reviews 105 (2): 739–58. doi:10.1021/cr030117g. PMID 15700963. 
  49. Kametani, T.; Ogasawara, K. J. J. Chem. Soc., C 1967, 2208
  50. Day, J. J.; McFadden, R. M.; Virgil, S. C.; Kolding, H.; Alleva, J. L.; Stoltz, B. M. (2011). "The catalytic enantioselective total synthesis of (+)-liphagal". Angew. Chem. Int. Ed. 50 (30): 6814–8. doi:10.1002/anie.201101842. PMID 21671325. 
  51. Soorukram, D.; Qu, T.; Barrett, A. G. M. (2008). "Four-Component Benzyne Coupling Reactions: A Concise Total Synthesis of Dehydroaltenuene B". Org. Lett. 10 (17): 3833–3835. doi:10.1021/ol8015435. PMID 18672878. 

External links