Chemistry:Organoactinide chemistry

Short description: Study of chemical compounds containing actinide-carbon bonds

Tetrakis(cyclopentadienyl)thorium(IV) an organoactinide compound

Organoactinide chemistry is the science exploring the properties, structure, and reactivity of organoactinide compounds, which are organometallic compounds containing a carbon to actinide chemical bond.

Like most organometallic compounds, the organoactinides are air sensitive and need to be handled using the appropriate methods.

Organometallic complexes with σ-bonding

Most common organoactinide complexes involve π-bonding with ligands such as cyclopentadienyl, but there are a few exceptions with σ-bonding, namely in thorium and uranium chemistry as these are the most easily handleable elements of this group.

Alkyl and aryl compounds

U[CH(SiMe
3)
2]
3, the first uranium alkyl compound to be synthesized

Attempts to synthesize uranium alkyls were first made during the Manhattan project by Henry Gilman, inspired by the volatility of main group organometallics. However he noticed that these compounds tend to be highly unstable.

Marks and Seyam attempted to synthesize them from UCl₄ using organolithium reagents, but these decomposed quickly.

In 1989, a group finally synthesized a homoleptic complex with trimethylsilyl groups: U[CH(SiMe
3)
2]
3. Since then, variants of higher coordination numbers such as [Li(TMEDA)]
2[UMe
6] have also been synthesized.

On the other hand, only one homoleptic thorium alkyl is known. The seven coordinate heptamethylthorate(IV) anion was synthesized in 1984 using a similar procedure to the equivalent uranium complex.

Mixed phosphine containing complexes of thorium and uranium tetramethyls have also been made, using dmpe as the organophosphorus ligand stabilising the structure (amides can also assume this role).

Metallacycles

Uranium and thorium both form metallacycles with a diverse chemistry. These complexes are very labile so trimethylsilyl groups are again present for protection. These compounds are formed by reacting weaker alkylating agents (LiCH
3 and Mg(CH
3)
2 are too strong and lead to the formation of simple alkyls) with ClAn[N(Si(CH
3)
2]
3 (An = Th, U).

a uranium-containing metallacycle

Organometallic complexes with π-bonding

A large majority of the organoactinides involve Cyclopentadienyl (Cp) or Cyclooctatetraene (COT) and their derivatives as ligands. These usually take part in η⁵- and η⁸-bonding, donating electron density through their pi orbitals.

Cyclooctatetraene complexes

Actinocenes

A Sandwich compound with two Cyclooctatetraene ligands

Actinides form sandwich complexes with cyclooctatetraene analogously to how transition metals react with cyclopentadienyl ligands. Actinide ions have atomic radii that are too large to form MCp₂ compounds, so that they prefer to react with C₈H₈^2- ions instead.

The first example of this type of chemical species was discovered in 1968 by Andrew Streitwieser, who prepared uranocene by reacting K(COT)
2 with UCl
4 in tetrahydrofuran at 0 °C. The compound itself is a pyrophoric green solid that is otherwise quite unreactive.

The original synthesis of uranocene

Most tetravalent actinides react similarly to form actinocenes:

Bis(cyclooctatetraene)protactinium was first prepared in 1973 by turning protactinium(V) oxide into the pentachloride and reducing it with aluminium powder before reacting it with potassium cyclooctatetraenide.

[math]\ce{ Pa2O5 + SOCl2 ->[400C] PaCl5 }[/math]

[math]\ce{ 3PaCl5 + Al -> 3PaCl4 + AlCl3 }[/math]

[math]\ce{ PaCl4 + 2K2(COT) -> Pa(COT)2 + 4KCl }[/math]:

Neptunocene and thorocene were made similarly using the tetrachlorides. Plutonocene is the exception here: as there is no stable plutonium(IV) chloride known, (Hpy)₂PuCl₆ had to be used.

The later actinides also form complexes with COT but these don't usually assume the classic neutral sandwich structure. Trivalent actinides form ionic compounds with COT ligands, this can be exemplified by the reaction of americium triiodide with K₂COT.

[math]\ce{ AmI3 + K2(COT) -> KAm(COT)2 }[/math]

This compound is present in solution as the THF adduct.

Complexes of substituted cyclooctatetraenes

Many substituted uranocenes have been synthesized. The methodology followed was the same as for simple U(COT)
2, but the properties of some of the compounds were found to be different.

The tetraphenylcyclooctatetraene complex was found to be completely air stable by Streitwieser. This high stability is probably due to the hindering effects of the phenyl groups, protecting the U⁴⁺ center from an attack by oxygen.

All these derivatives are much more soluble in organic solvents such as benzene, in which they form green solutions that are more air sensitive than the crystalline solids.

Substituted cyclooctatetraene ligands

Plutonium also forms a sandwich complex with 1,4-bis(trimethylsilyl)cyclooctatetraenyl (1,4-COT’’) and its 1,3 isomer. This compound is prepared by the oxidation of the anionic green Pu(III) complex Li(THF)₄[Pu(1,4-COT’’)₂] with cobalt(II) chloride which leads to the formation of Pu(1,4-COT’’)(1,3-COT’’). The reaction is easily noticeable by the THF solution changing to a dark red colour, characteristic of Pu(IV).

The structures of Pu(3-COT’’)(4-COT’’) and Np(COT’’’)₂

The neptunium equivalent with the trisubstituted COT’’’ has also been reported and the complexes of both the tri- and di- substituted ligands with thorium and uranium are well known. They were synthesized according to the following reaction schemes:

An = Th, U

Cyclopentadiene complexes

Tris(cyclopentadienyl)actinide complexes

The general structure of tris(cyclopentadiene)actinide complexes

Most trivalent f block elements form compounds with cyclopentadiene with the formula M(Cp)
3. These complexes have been isolated up to californium, with the einsteinium equivalent having been observed in the gas phase.

An = Th, U, Np, Pu, Am, Cm, Bk, Cf

The synthesis of the AnCp₃ usually follows the reaction scheme shown above with a few more added steps that are sometimes needed to synthesize the trichlorides from the commercially supplied oxides. Nevertheless, other syntheses are also used by some authors: alkali metal cyclopentadienides can be used instead of the beryllium complex, and An(IV) complexes can also be used via a reductive elimination reaction.

The colours of AnCp₃ complexes:

Th	U	Np	Pu	Am	Cm	Bk	Cf
green	brown	pale green	green	flesh	colourless	amber	red

These compounds have been known since the sixties, however until 2018 only the neptunium compound was structurally characterised. Kovàcs and coworkers were able to analyse the plutonium and uranium complexes, finding that all three structures were similar, with an asymmetrical distribution of cylopentadienide ligands and a higher covalent character to the carbon-actinide bond than in organolanthanide compounds.

Tetrakis(cyclopentadienyl)actinide complexes

Tetravalent thorium, uranium and neptunium easily form MCp₄ compounds by a metathesis reaction from potassium cyclopentadienide using benzene as a solvent.

An= Th, U, Np

See also

• Organouranium chemistry
• Organoneptunium chemistry
• Actinocenes
  • Uranocene, U(C₈H₈)₂
  • Neptunocene, Np(C₈H₈)₂
  • Plutonocene, Pu(C₈H₈)₂

References

• Marks, Tobin J. (1982). "Actinide Organometallic Chemistry". Science 217 (4564): 989–997. doi:10.1126/science.217.4564.989.