Chemistry:Slater-type orbital

From HandWiki
Short description: Function used in quantum chemistry

Slater-type orbitals (STOs) or Slater-type functions (STFs) are functions used as atomic orbitals in the linear combination of atomic orbitals molecular orbital method. They are named after the physicist John C. Slater, who introduced them in 1930.[1]

They possess exponential decay at long range and Kato's cusp condition at short range (when combined as hydrogen-like atom functions, i.e. the analytical solutions of the stationary Schrödinger equation for one electron atoms). Unlike the hydrogen-like ("hydrogenic") Schrödinger orbitals, STOs have no radial nodes (neither do Gaussian-type orbitals).

Definition

STOs have the following radial part:

R(r)=Nrn1eζr

where

The normalization constant is computed from the integral

0xneαxdx=n!αn+1.

Hence

N20(rn1eζr)2r2dr=1N=(2ζ)n2ζ(2n)!.

It is common to use the spherical harmonics Ylm(𝐫) depending on the polar coordinates of the position vector 𝐫 as the angular part of the Slater orbital.

STO-nG Basis Sets

All the spherical coordinates of the Slater-type orbital can be written as the function:

Snlm(r,θ,ϕ)=Nrn1eζrYlm(θ,ϕ)[2]

Where the constant N=(2ζ)n2ζ(2n)!

Below is the Gaussian-type function:

Gnlm(r,θ,ϕ)=Nrn1eαr2Ylm(θ,ϕ)[2]

Where N is the same constant.

Due to the shape of the functions, Gaussian-type orbitals are easier to solve. While Slater orbitals were once used, they are not used anymore in modern computational chemistry techniques. This is because the integrals used to evaluate them are difficult. In particular, multicenter integrals are difficult to be evaluated by Slater orbitals. However, taking the integral of a Gaussian is much easier.[2]

For example, the Slater-type orbital for 1s is:

ϕ1sSTO(r,ζ)=S100(r,ζ)=(ζ3π)1/2eζr[2]

And the Gaussian-type orbital for 1s is:

ϕ1sGTO(r,α)=(2απ)3/4eαr2[2]

However, these functions exhibit variable behavior around the nucleus, with the Slater-type having a cusp and the Gaussian flattening out at the center. However, we can approximate the STO using a linear combination of Gaussian functions (or GTO above). Gaussians tend to underestimate the values close to the nucleus, which tends to have significant deviations when calculating larger molecules. Researchers have curve-fit Gaussian functions to Slater functions.[2]

ϕ1sSTO-3G(r)=i=13d1siϕ1sGTO(r,α1si)[2]

=0.4446ϕ1sGTO(r,0.1688)+0.5353ϕ1sGTO(r,0.6239)+0.1543ϕ1sGTO(r,3.425)

The black line represents the slater-type orbital (STO), while the purple line represents the gaussian function (GF). Gaussians are less accurate but easier to compute

This is called a STO-3G basis set. The function is made of a linear combination of Gaussians curve-fitted to resemble a Slater-type orbital. Although it leads to more integrals to evaluate, all of them are relatively much easier. Below is a table of the d1s1 coefficients and α1s1 coefficients for an STO-6G basis set curve-fitted for zeta = 1.24:[2]

d1s1 α1s1
0.1303 0.1000
0.4165 0.2431
0.3706 0.6260
0.1685 1.8222
0.0494 6.5131
0.0092 35.5231

Derivatives

The first radial derivative of the radial part of a Slater-type orbital is

R(r)r=[(n1)rζ]R(r)

The radial Laplace operator is split in two differential operators

2=1r2r(r2r)

The first differential operator of the Laplace operator yields

(r2r)R(r)=[(n1)rζr2]R(r)

The total Laplace operator yields after applying the second differential operator

2R(r)=(1r2r)[(n1)rζr2]R(r)

the result

2R(r)=[n(n1)r22nζr+ζ2]R(r)

Angular dependent derivatives of the spherical harmonics don't depend on the radial function and have to be evaluated separately.

Integrals

The fundamental mathematical properties are those associated with the kinetic energy, nuclear attraction and Coulomb repulsion integrals for placement of the orbital at the center of a single nucleus. Dropping the normalization factor N, the representation of the orbitals below is

χnm(𝐫)=rn1eζrYm(𝐫).

The Fourier transform is[3]

χnm(𝐤)=ei𝐤𝐫χnm(𝐫)d3r=4π(n)!(2ζ)n(ik/ζ)Ym(𝐤)s=0(n)/2ωsn(k2+ζ2)n+1s,

where the ω are defined by

ωsn(14ζ2)s(ns)!s!(n2s)!.

The overlap integral is

χnm*(r)χnm(r)d3r=δδmm(n+n)!(ζ+ζ)n+n+1

of which the normalization integral is a special case. The superscript star denotes complex-conjugation.

The kinetic energy integral is χnm*(r)(122)χnm(r)d3r=12δδmm0e(ζ+ζ)r[[(+1)n(n1)]rn+n2+2ζnrn+n1ζ'2rn+n]dr, a sum over three overlap integrals already computed above.

The Coulomb repulsion integral can be evaluated using the Fourier representation (see above)

χnm*(𝐫)=ei𝐤𝐫(2π)3χnm*(𝐤)d3k

which yields χnm*(𝐫)1|𝐫𝐫|χnm(𝐫)d3r=4π1(2π)3χnm*(𝐤)1k2χnm(𝐤)d3k=8δδmm(n)!(n)!(2ζ)nζ(2ζ)nζ'0k2[s=0(n)/2ωsn(k2+ζ2)n+1ss=0(n)/2ωsn(k2+ζ'2)n+1s]dk These are either individually calculated with the law of residues or recursively as proposed by Cruz et al. (1978).[4]

STO software

Some quantum chemistry software uses sets of Slater-type functions (STF) analogous to Slater type orbitals, but with variable exponents chosen to minimize the total molecular energy (rather than by Slater's rules as above). The fact that products of two STOs on distinct atoms are more difficult to express than those of Gaussian functions (which give a displaced Gaussian) has led many to expand them in terms of Gaussians.[5]

Analytical ab initio software for polyatomic molecules has been developed, e.g., STOP: a Slater Type Orbital Package in 1996.[6]

SMILES uses analytical expressions when available and Gaussian expansions otherwise. It was first released in 2000.

Various grid integration schemes have been developed, sometimes after analytical work for quadrature (Scrocco), most famously in the ADF suite of DFT codes.

After the work of John Pople, Warren. J. Hehre and Robert F. Stewart, a least squares representation of the Slater atomic orbitals as a sum of Gaussian-type orbitals is used. In their 1969 paper, the fundamentals of this principle are discussed and then further improved and used in the GAUSSIAN DFT code. [7]

See also

References

  1. Slater, J. C. (1930). "Atomic Shielding Constants". Physical Review 36 (1): 57. doi:10.1103/PhysRev.36.57. Bibcode1930PhRv...36...57S. http://elib.bsu.by/handle/123456789/154383. 
  2. 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 McQuarrie, Donald A.; Simon, John D. (200). Physical chemistry: a molecular approach. Sausalito, Calif: Univ. Science Books. ISBN 978-0-935702-99-6. 
  3. Belkic, D.; Taylor, H. S. (1989). "A unified formula for the Fourier transform of Slater-type orbitals". Physica Scripta 39 (2): 226–229. doi:10.1088/0031-8949/39/2/004. Bibcode1989PhyS...39..226B. 
  4. Cruz, S. A.; Cisneros, C.; Alvarez, I. (1978). "Individual orbit contribution to the electron stopping cross section in the low-velocity region". Physical Review A 17 (1): 132–140. doi:10.1103/PhysRevA.17.132. Bibcode1978PhRvA..17..132C. 
  5. Guseinov, I. I. (2002). "New complete orthonormal sets of exponential-type orbitals and their application to translation of Slater Orbitals". International Journal of Quantum Chemistry 90 (1): 114–118. doi:10.1002/qua.927. 
  6. Bouferguene, A.; Fares, M.; Hoggan, P. E. (1996). "STOP: Slater Type Orbital Package for general molecular electronic structure calculations". International Journal of Quantum Chemistry 57 (4): 801–810. doi:10.1002/(SICI)1097-461X(1996)57:4<801::AID-QUA27>3.0.CO;2-0. 
  7. Hehre, W. J.; Stewart, R. F.; Pople, J. A. (1969-09-15). "Self-Consistent Molecular-Orbital Methods. I. Use of Gaussian Expansions of Slater-Type Atomic Orbitals" (in en). The Journal of Chemical Physics 51 (6): 2657–2664. doi:10.1063/1.1672392. ISSN 0021-9606. Bibcode1969JChPh..51.2657H.