Device for Connection of Luminaires

From HandWiki
Short description: Electrical light fixture connector
DCL
Type Ceiling lamp connector
Designer IEC
Designed 2005; 19 years ago (2005)
Manufacturer Elko, Legrand, Schneider Electric, Lébénoïd, more
Length 24.2 mm + length of pins
Width 30.2 mm
Audio signal None
Video signal None
Cable Electrical
Pins 3
Connector DCL
Signal 6 ampere
Earth Yes
Max. voltage 250 V AC
Max. current 6 A
Data signal None
Pin 1 Load L
Pin 2 Protective earth PE
Pin 3 Neutral N
3 on the plug, 6 inside the socket.

Device for Connection of Luminaires (DCL) is a European standard for ceiling light fixtures introduced in 2005 and refined in 2009. It uses 6 ampere. DCL must carry the CE marking as per the Low Voltage Directive. DCL is only allowed to be installed with ground.

Example of DCL socket.
Socket internals
Pin Color Function
1 Load (L)
2 Wire brown.svg Load (L)
3 Protective earth
4 Wire green yellow stripe.svg Protective earth
5 Neutral (N)
6 Wire blue.svg Neutral (N)

Adoption

Country Notes
 Austria
 Belgium
 Bulgaria
 Croatia
 Cyprus
 Czech Republic
 Denmark
 Estonia
 Finland
 France Mandatory in new and renovated homes since 2001. Norme Française NF C 15-100.
 Germany
 Greece
 Hungary
 Republic of Ireland
 Italy
 Latvia
 Lithuania
 Luxembourg
 Malta
 Netherlands
 Poland
 Portugal
 Romania
 Slovakia
 Slovenia
 Spain
 Sweden Mandatory since April 1, 2019
Non-EU countries
Country Notes
 Norway Mandatory since December 31, 2010

External links