Engineering:Terminal (electronics)

From HandWiki
Short description: Connection point in electronic circuits
Terminal symbol
A terminal strip, to which wires can be soldered

A terminal is the point at which a conductor from a component, device or network comes to an end.[1] Terminal may also refer to an electrical connector at this endpoint, acting as the reusable interface to a conductor and creating a point where external circuits can be connected.[2][3] A terminal may simply be the end of a wire or it may be fitted with a connector or fastener.[citation needed]

In network analysis, terminal means a point at which connections can be made to a network in theory and does not necessarily refer to any physical object. In this context, especially in older documents, it is sometimes called a pole. On circuit diagrams, terminals for external connections are denoted by empty circles.[4] They are distinguished from nodes or junctions which are entirely internal to the circuit, and are denoted by solid circles.[5]

All electrochemical cells have two terminals (electrodes) which are referred to as the anode and cathode or positive (+) and negative (-). On many dry batteries, the positive terminal (cathode) is a protruding metal cap and the negative terminal (anode) is a flat metal disc (see Battery terminal). In a galvanic cell such as a common AA battery, electrons flow from the negative terminal to the positive terminal, while the conventional current is opposite to this.[6]

Types of terminals


See also

References