Chemistry:N,N,N′,N′-Tetramethylformamidinium chloride

From HandWiki
Revision as of 15:51, 18 August 2023 by Steve Marsio (talk | contribs) (over-write)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Short description: Chemical compound


N,N,N′,N′-Tetramethylformamidinium chloride
Tetramethylformamidiniumchlorid Struktur.svg
Names
Preferred IUPAC name
1-(Dimethylamino)-N,N-dimethylmethaniminium chloride
Other names
(Dimethylaminomethylene)dimethylammonium chloride
Identifiers
3D model (JSmol)
ChemSpider
Properties
C5H13ClN2
Molar mass 136.62 g·mol−1
Appearance Solid
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references
Tracking categories (test):

N,N,N′,N′-Tetramethylformamidinium chloride is the simplest representative of quaternary formamidinium cations of the general formula [R2N−CH=NR2]+ with a chloride as a counterion in which all hydrogen atoms of the protonated formamidine [HC(=NH2)NH2]+ are replaced by methyl groups.[1]

Deprotonation results in the exceptionally basic bis(dimethylamino)carbene R2N−C̈−NR2.[2]

Preparation

It is generated by protonation of (CH3)3COCH(N(CH3)2)2 (Bredereck's reagent).[3]

(CH3)3COCH(N(CH3)2)2 + H+ → (CH3)3COH + [CH(N(CH3)2)2]+

N,N,N′,N′-Tetramethylformamidinium chloride is also obtained in high yield (95%) in the reaction of dimethylformamide (DMF) with dimethylcarbamoyl chloride[4]The conversion of DMF with thionyl chloride in a ratio of 3:1 obtains the product in a is significantly lower yield (72%) which appears, however, more realistic in view of the tricky handling of the chloride salt.[5]

Synthesis of N,N,N′,N′-tetramethylformamidinium chloride with thionyl chloride

Properties

N,N,N′,N′-Tetramethylformamidinium chloride is a light yellow, strongly hygroscopic solid.[6]

For drying, the salt is dissolved in dichloromethane and the solution is treated with solid anhydrous sodium sulfate. After several dissolutions in dichloromethane and acetone, and precipitations with tetrahydrofuran, a colorless solid is obtained, which is stable under air and moisture sealing.[1]

The presumption of a mesomeric equilibrium between ionic formamidinium chloride and covalent bis(dimethylamino)chloromethane structure:

Mesomerism of N,N,N′,N′-tetramethylformamidinium chloride

could be decided by reaction with germanium dichloride or tin(II) chloride in favour of the presence of N,N,N′,N′-tetramethylformamidinium chloride.[7]

Reaction of N,N,N′,N′-tetramethylformamidinium chloride with germanium(II) chloride

The hygroscopy of the chloride salt complicates the handling of the compound. Therefore, also syntheses of the much better processible salts N,N,N′,N′-tetramethylformamidinium methylsulfate[6] (from the dimethylformamide–dimethylsulfate complex[8]) and of N,N,N′,N′-tetramethylformamidinium p-toluenesulfonate (from dimethylformamide and p-toluenesulfonyl chloride) were investigated.[9][10]

Applications

N,N,N′,N′-Tetramethylformamidinium chloride is useful as a reagent for aminomethylenation (that is, to introduce a =CH−NR1R2 function to CH-acidic compounds). For example, ethyl cyanoacetate reacts with the formamidinium salt in the presence of solid sodium hydroxide to give ethyl (dimethylaminomethylene)cyanoacetate in practically quantitative yields.[11]

Aminomethylenation with N,N,N′,N′-tetramethylformamidinium chloride

The aminomethylenation provides intermediates for the synthesis of heterocycles such as indoles, pyrimidines, pyridines and quinolones.

N,N,N′,N′-Tetramethylformamidinium chloride reacts with alkali metal dimethylamides (such as lithium dimethylamide or sodium dimethylamide) to tris(dimethylamino)methane in yields of 55% to 84%.[12][13][14]

Synthesis of tris(dimethylamino)methane

The reaction product is suited as a reagent for formylation and aminomethylenation.

From N,N,N′,N′-tetramethylformamidinium chloride and sodium ethoxide in ethanol, dimethylformamide diethyl acetal is formed in 68% yield.[15]

Synthesis of dimethylformamide diethyl acetal

In aqueous sodium cyanide, N,N,N′,N′-tetramethylformamidinium reacts to bis(dimethylamino)acetonitrile.[16]

Synthesis of bis(dimethylamino)acetonitrile

From N,N,N′,N′-tetramethylformamidinium and anhydrous hydrogen cyanide, dimethylaminomalonic acid dinitrile is obtained in 92% yield.[17]

Synthesis of dimethylaminomalonic acid dinitrile

N,N,N′,N′-Tetramethylformamidinium can be regaminated with cyclo-aliphatic amines to the corresponding heterocyclic formamidines.[17]

Transamination of N,N,N′,N′-tetramethylformamidinium chloride

N,N,N′,N′-tetramethylformamidinium is a catalyst in the preparation of acyl chlorides from carboxylic acids and phosgene has been reported.[18]

Strong bases (such as phenyllithium) can abstract a proton from the formamidinium cation of N,N,N′,N′-tetramethylformamidinium forming bis(dimethylamino)carbene.[1][2]

Formation of bis(dimethylamino)carbene from N,N,N′,N′-tetramethylformamidinium chloride

See also

References

  1. 1.0 1.1 1.2 Alder, R. W.; Blake, M. E.; Bufali, S.; Butts, C. P.; Orpen, A. G.; Schütz, J.; Williams, S. J. (2001). "Preparation of tetraalkylformamidinium salts and related species as precursors to stable carbenes". Journal of the Chemical Society, Perkin Transactions 1 (14): 1586–1593. doi:10.1039/B104110J. 
  2. 2.0 2.1 Magill, A. M.; Cavell, K. J.; Yates, B. F. (2004). "Basicity of nucleophilic carbenes in aqueous and nonaqueous solvents – theoretical predictions". Journal of the American Chemical Society 126 (28): 8717–24. doi:10.1021/ja038973x. PMID 15250724. 
  3. Kantlehner, Willi; Bowers, Albert (2007). "T-Butoxybis(dimethylamino)methane". Encyclopedia of Reagents for Organic Synthesis. doi:10.1002/9780470842898.rb350.pub2. ISBN 978-0471936237. 
  4. Arnold, Z. (1959). "The preparation of tetramethylformamidinium salts and their vinylogues". Collection of Czechoslovak Chemical Communications 24 (3): 760–765. doi:10.1135/cccc19590760. 
  5. Kantlehner, W.; Speh, P. (1971). "Säureamid-Reaktionen. LI. Notiz zur Darstellung von N,N,N′,N′-Tetramethylformamidiniumchlorid" (in de). Chemische Berichte 104 (11): 3714–3715. doi:10.1002/cber.19711041136. 
  6. 6.0 6.1 ; Effenberger, F. & Simchen, G."Verfahren zur Herstellung von N-substituierten Amidinen oder deren Vinylogen (Process for the preparation of N-substituted amidines or their vinylogues)" DE patent 1205528, issued 1965-11-25, assigned to Bredereck, H.
  7. Tian, X.; Pape, T.; Mitzel, N. W. (2004). "Formamidinium Salts of Low Valent Metal Halide Anions MX3 (M = Ge, Sn) and M2X2−6 (M = Ga, In)". Zeitschrift für Naturforschung 59b (11–12): 1524–1531. doi:10.1515/znb-2004-11-1224. 
  8. Bredereck, H.; Effenberger, F.; Simchen, G. (1963). "Säureamid-Reaktionen. XXXII. Über Säureamid-Dialkylsulfat-Komplexe" (in de). Chemische Berichte 96 (5): 1350–1355. doi:10.1002/cber.19630960526. 
  9. & Poshkus A. C."Tetramethylformamidinium arenesulfonates and method of preparation" US patent 3707553, issued 1972-12-26, assigned to Armstrong Cork Co.
  10. Schindlbauer, H. (1969). "Reaktionen mit Dimethylformamid. 3. (Mitt.) Die Umsetzung von Arylsulfochloriden und Arylsulfonsäuren mit Dimethylformamid" (in de). Monatshefte für Chemie 100 (5): 1590–1595. doi:10.1007/BF00900174. 
  11. & Kraus, H."Process for the preparation of aminomethylene compounds" US patent 5241099, issued 1993-08-31, assigned to Bayer AG
  12. Bredereck, H.; Effenberger, F.; Brendle, T. (1966). "Synthese und Reaktionen von Trisdimethylaminomethan" (in de). Angewandte Chemie 78 (2): 147–148. doi:10.1002/ange.19660780212. http://nbn-resolving.de/urn:nbn:de:bsz:93-opus-40877. 
  13. Bredereck, H., "Verfahren zur Herstellung von Tris-dimethylaminomethan (Process for the preparation of tris(dimethylamino)methane))", DE patent 1217391, issued 1966-12-08, assigned to Bredereck, H.
  14. Bredereck, H.; Effenberger, F.; Brendle, T.; Muffler, H. (1968). "Orthoamide. V. Synthese von Tris-dialkylamino-methanen" (in de). Chemische Berichte 101 (5): 1885–1888. doi:10.1002/cber.19681010541. 
  15. Gold, H. (1960). "Die Reaktion von Cyanurchlorid mit Dimethylformamid" (in de). Angewandte Chemie 72 (24): 956–959. doi:10.1002/ange.19600722406. 
  16. Bredereck, H.; Simchen, G.; Kantlehner, W. (1971). "Orthoamide. XVI. Synthese von O.N- und N.N-Acetalen der α-Keto-carbonsäure-nitrile sowie von Iminoestern" (in de). Chemische Berichte 104 (3): 924–931. doi:10.1002/cber.19711040331. 
  17. 17.0 17.1 Gold, H.; Bayer, O. (1961). "Die Darstellung basisch substituierter Malonsäure-dinitrile" (in de). Chemische Berichte 94 (10): 2594–2596. doi:10.1002/cber.19610941004. 
  18. & Stamm, A."Method for producing carboxylic acid chlorides" EP patent 1124783, issued 2001-08-22, assigned to BASF AG