Bond length

From HandWiki
Revision as of 17:08, 6 February 2024 by Scavis2 (talk | contribs) (update)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Short description: Average distance between two nuclei of chemically bonded atoms

In molecular geometry, bond length or bond distance is defined as the average distance between nuclei of two bonded atoms in a molecule. It is a transferable property of a bond between atoms of fixed types, relatively independent of the rest of the molecule.

Explanation

Bond length is related to bond order: when more electrons participate in bond formation the bond is shorter. Bond length is also inversely related to bond strength and the bond dissociation energy: all other factors being equal, a stronger bond will be shorter. In a bond between two identical atoms, half the bond distance is equal to the covalent radius.

Bond lengths are measured in the solid phase by means of X-ray diffraction, or approximated in the gas phase by microwave spectroscopy. A bond between a given pair of atoms may vary between different molecules. For example, the carbon to hydrogen bonds in methane are different from those in methyl chloride. It is however possible to make generalizations when the general structure is the same.

Bond lengths of carbon with other elements

A table with experimental single bonds for carbon to other elements[1] is given below. Bond lengths are given in picometers. By approximation the bond distance between two different atoms is the sum of the individual covalent radii (these are given in the chemical element articles for each element). As a general trend, bond distances decrease across the row in the periodic table and increase down a group. This trend is identical to that of the atomic radius.

Bond distance of carbon to other elements[1]
Bonded element Bond length (pm) Group
H 106–112 group 1
Be 193 group 2
Mg 207 group 2
B 156 group 13
Al 224 group 13
In 216 group 13
C 120–154 group 14
Si 186 group 14
Sn 214 group 14
Pb 229 group 14
N 147–210 group 15
P 187 group 15
As 198 group 15
Sb 220 group 15
Bi 230 group 15
O 143–215 group 16
S 181–255 group 16
Cr 192 group 6
Se 198–271 group 16
Te 205 group 16
Mo 208 group 6
W 206 group 6
F 134 group 17
Cl 176 group 17
Br 193 group 17
I 213 group 17

Bond lengths in organic compounds

The bond length between two atoms in a molecule depends not only on the atoms but also on such factors as the orbital hybridization and the electronic and steric nature of the substituents. The carbon–carbon (C–C) bond length in diamond is 154 pm. It is generally considered the average length for a carbon–carbon single bond, but is also the largest bond length that exists for ordinary carbon covalent bonds. Since one atomic unit of length (i.e., a Bohr radius) is 52.9177 pm, the C–C bond length is 2.91 atomic units, or approximately three Bohr radii long.

Unusually long bond lengths do exist. Current record holder for the longest C-C bond with a length of 186.2 pm is 1,8-Bis(5-hydroxydibenzo[a,d]cycloheptatrien-5-yl)naphthalene,[2] one of many molecules within a category of hexaaryl ethanes, which are derivatives based on hexaphenylethane skeleton. Bond is located between carbons C1 and C2 as depicted in a picture below.

Hexaphenylethane skeleton based derivative containing longest known C-C bond between atoms C1 and C2 with a length of 186.2 pm

Another notable compound with an extraordinary C-C bond length is tricyclobutabenzene, in which a bond length of 160 pm is reported. Longest C-C bond within the cyclobutabenzene category is 174 pm based on X-ray crystallography.[3] In this type of compound the cyclobutane ring would force 90° angles on the carbon atoms connected to the benzene ring where they ordinarily have angles of 120°.

Cyclobutabenzene with a bond length in red of 174 pm

The existence of a very long C–C bond length of up to 290 pm is claimed in a dimer of two tetracyanoethylene dianions, although this concerns a 2-electron-4-center bond.[4][5] This type of bonding has also been observed in neutral phenalenyl dimers. The bond lengths of these so-called "pancake bonds"[6] are up to 305 pm.

Shorter than average C–C bond distances are also possible: alkenes and alkynes have bond lengths of respectively 133 and 120 pm due to increased s-character of the sigma bond. In benzene all bonds have the same length: 139 pm. Carbon–carbon single bonds increased s-character is also notable in the central bond of diacetylene (137 pm) and that of a certain tetrahedrane dimer (144 pm).

In propionitrile the cyano group withdraws electrons, also resulting in a reduced bond length (144 pm). Squeezing a C–C bond is also possible by application of strain. An unusual organic compound exists called In-methylcyclophane with a very short bond distance of 147 pm for the methyl group being squeezed between a triptycene and a phenyl group. In an in silico experiment a bond distance of 136 pm was estimated for neopentane locked up in fullerene.[7] The smallest theoretical C–C single bond obtained in this study is 131 pm for a hypothetical tetrahedrane derivative.[8]

The same study also estimated that stretching or squeezing the C–C bond in an ethane molecule by 5 pm required 2.8 or 3.5 kJ/mol, respectively. Stretching or squeezing the same bond by 15 pm required an estimated 21.9 or 37.7 kJ/mol.

Bond lengths in organic compounds[9]
C–H Length (pm) C–C Length (pm) Multiple-bonds Length (pm)
sp3–H 110 sp3–sp3 154 Benzene 140
sp2–H 109 sp3–sp2 150 Alkene 134
sp–H 108 sp2–sp2 147 Alkyne 120
sp3–sp 146 Allene 130
sp2–sp 143
sp–sp 137

References

  1. Handbook of Chemistry & Physics (65th ed.). CRC Press. 1984-06-27. ISBN 0-8493-0465-2. 
  2. Yusuke Ishigaki, Takuya Shimajiri, Takashi Takeda, Ryo Katoono, Takanori Suzuki (April 2018). "Naphthocyclobutenes and Benzodicyclobutadienes: Synthesis in the Solid State and Anomalies in the Bond Lengths". CHEM 4 (4): 795–806. doi:10.1016/j.chempr.2018.01.011. https://www.cell.com/chem/fulltext/S2451-9294(18)30033-0?_returnURL=https%3A%2F%2Flinkinghub.elsevier.com%2Fretrieve%2Fpii%2FS2451929418300330%3Fshowall%3Dtrue#supplementaryMaterial. 
  3. Fumio Toda (April 2000). "Naphthocyclobutenes and Benzodicyclobutadienes: Synthesis in the Solid State and Anomalies in the Bond Lengths". European Journal of Organic Chemistry 2000 (8): 1377–1386. doi:10.1002/(SICI)1099-0690(200004)2000:8<1377::AID-EJOC1377>3.0.CO;2-I. http://www3.interscience.wiley.com/cgi-bin/abstract/71008297/ABSTRACT. 
  4. Novoa J. J.; Lafuente P.; Del Sesto R. E.; Miller J. S. (2001-07-02). "Exceptionally Long (2.9 Å) C–C Bonds between [TCNE Ions: Two-Electron, Four-Center π*–π* C–C Bonding in π-[TCNE]22−"]. Angewandte Chemie International Edition 40 (13): 2540–2545. doi:10.1002/1521-3773(20010702)40:13<2540::AID-ANIE2540>3.0.CO;2-O. http://www3.interscience.wiley.com/cgi-bin/abstract/84503205/ABSTRACT. 
  5. Lü J.-M.; Rosokha S. V.; Kochi J. K. (2003). "Stable (Long-Bonded) Dimers via the Quantitative Self-Association of Different Cationic, Anionic, and Uncharged -Radicals: Structures, Energetics, and Optical Transitions". J. Am. Chem. Soc. 125 (40): 12161–12171. doi:10.1021/ja0364928. PMID 14519002. 
  6. Suzuki S.; Morita Y.; Fukui K.; Sato K.; Shiomi D.; Takui T.; Nakasuji K. (2006). "Aromaticity on the Pancake-Bonded Dimer of Neutral Phenalenyl Radical as Studied by MS and NMR Spectroscopies and NICS Analysis". J. Am. Chem. Soc. 128 (8): 2530–2531. doi:10.1021/ja058387z. PMID 16492025. 
  7. Huntley D. R.; Markopoulos G.; Donovan P. M.; Scott L. T.; Hoffmann R. (2005). "Squeezing C–C Bonds". Angewandte Chemie International Edition 44 (46): 7549–7553. doi:10.1002/anie.200502721. PMID 16259033. 
  8. Martinez-Guajardo G.; Donald K. J.; Wittmaack B. K.; Vazquez M. A.; Merino G. (2010). "Shorter Still: Compresing C–C Single Bonds". Organic Letters 12 (18): 4058–61. doi:10.1021/ol101671m. PMID 20718457. 
  9. Fox, Marye Anne; Whitesell, James K. (1995). Organische Chemie: Grundlagen, Mechanismen, Bioorganische Anwendungen. Springer. ISBN 978-3-86025-249-9. 

External links