Chemistry:Basketane
| |||
Names | |||
---|---|---|---|
Preferred IUPAC name
Pentacyclo[4.4.0.02,5.03,8.04,7]decane | |||
Identifiers | |||
3D model (JSmol)
|
|||
ChemSpider | |||
PubChem CID
|
|||
| |||
| |||
Properties | |||
C10H12 | |||
Molar mass | 132.206 g·mol−1 | ||
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). | |||
Infobox references | |||
Basketane is a polycyclic alkane with the chemical formula C10H12. The name is taken from its structural similarity to a basket shape. Basketane was first synthesized in 1966, independently[1] by Masamune[2] and Dauben and Whalen.[3] A patent application published in 1988 used basketane, which is a hydrocarbon, as a source material in doping thin diamond layers because of the molecule's high vapor pressure, carbon ring structure, and fewer hydrogen-to-carbon bond ratio.[4]
Chemical nomenclature
In the year 1989 and before the synthesis of basketane, historic chemists were intrigued by the structural make-up of molecules, specifically those in objects seen in everyday life.[5] Using supramolecular chemistry, molecules such as cubane and basketane were named according to their corresponding shape and historically revealed certain characteristics and personal motives of chemists at that time.[5] Naming these uniquely shaped molecules were also done considering chemical nomenclature such as adding "-anes" for single carbon-carbon bonds and "-enes" for double carbon-carbon bonds to the end of the appropriate molecules.[6]
Synthesis
One synthesis of basketane begins with a Diels–Alder reaction between cyclooctatetraene (1) and maleic anhydride (2), giving the polycyclic anhydride 3, which photoisomerizes in acetone via an intramolecular cyclization to give 4 at a 40% yield. Hydrolysis of the anhydride followed by treatment with lead tetraacetate affords the unsaturated basketene (5), which is then hydrogenated to basketane (6).[2]
An alternative synthetic route with better overall yield uses 1,4-benzoquinone and cyclohexa-1,3-diene as starting materials. 1,4-Benzoquinone (1) is first converted to 2,5-dibromo-1,4-benzoquinone (2), which reacts in a Diels–Alder reaction with cyclohexa-1,3-diene (3) to form the polycyclic diketone 4. This diketone photoisomerizes to 1,6-dibromopentacyclo[6.4.0.03,6.04,12.05,9]dodeca-2,7-dione (5), which undergoes a pseudo-Favorskii rearrangement in a 25% aqueous solution of sodium hydroxide, giving the dicarboxylic acid 6. The acid is decarboxylated with a modified Hunsdiecker reaction to a dibromide 7, which is reductively debrominated with tributyltin hydride to basketane (8) at a 11% yield relative to the starting material cyclohexa-1,3-diene.[7]
A 1994 synthesis starts with homocubanone, a cubane derivative, forming basketane via the basketyl radical. The synthesis functions by forcing cubane rings to be opened up via structural strain to create the chemical bonds necessary for this rigid molecule.[8] This method is known as ring expansion where one part of two conjoined ringed are opened and rearranged to remove barriers between the two ring systems.[9]Cyclobutylmethyl radicals that rearrange and open into structures such as basketane and cubane are favorable rearrangements with free energy barriers around 0.3 kcal/mol.[10]
Properties and reactions
The C-C-C and H-C-C bond angles in basketane and several other cages deviate from 109.5 degrees, i.e., they are strained rings.[11] The strain energy is reflected in high heat of combustion.[11]
Metal-catalyzed rearrangements
Transition metals catalyze the valence isomerization of basketane and substituted derivatives. Silver perchlorate catalyzes its isomerization to the compound snoutane.
Other transition metals catalyze the formation of a snoutane derivative with a tricyclic diene. The ratio of the products depends on the nature of the catalyst used and the substitutions on the basketane.[12]
Basketane absorbs an equivalent amount of hydrogen gas in the presence of palladium on carbon, After some initial confusion, it is was shown that the C3-C4 bond is hydrogenolyzed to give the dihydrobasketane tetracyclo[4.4.0.02,5.03,8]decane.[13] Further hydrogenation cleaves the C5-C6 bond to give the hydrocarbon twistane.[14]
See also
References
- ↑ Marchand, A. P. (1989). "Synthesis and chemistry of homocubanes, bishomocubanes, and trishomocubanes". Chem. Rev. 89 (5): 1011–1033. doi:10.1021/cr00095a004.
- ↑ 2.0 2.1 Masamune, S.; Cuts, H.; Hogben, M. G. (1966). "Strained systems. VII. Pentacyclo[4.2.2.02,5.03,8.04,7]deca-9-ene, basketene.". Tetrahedron Lett. 7 (10): 1017–1021. doi:10.1016/S0040-4039(00)70232-2.
- ↑ Dauben, W. G.; Whalen, D. L. (1966). "Pentacyclo[4.4.0.02,5.03,8.04,7]decane and pentacyclo[4.3.0.02,5.03,8.04,7]nonane". Tetrahedron Lett. 7 (31): 3743–3750. doi:10.1016/S0040-4039(01)99958-7.
- ↑ Pastor, Ricardo C., "Process for depositing layers of diamond", WO patent 1988002792, published 1988-04-21, assigned to Hughes Aircraft Co., since withdrawn.
- ↑ 5.0 5.1 Vicens, Jacques (2007-07-26). "Aesthetics in chemistry" (in en). Journal of Inclusion Phenomena and Macrocyclic Chemistry 58 (3–4): 327–328. doi:10.1007/s10847-006-9161-7. ISSN 0923-0750. http://link.springer.com/10.1007/s10847-006-9161-7.
- ↑ "2.3.2". http://www.nanomedicine.com/NMI/2.3.2.htm.
- ↑ Gassman, Paul G.; Yamaguchi, Ryohei (1978). "1,8-Bishomocubane" (in en). The Journal of Organic Chemistry 43 (24): 4654–4656. doi:10.1021/jo00418a028. ISSN 0022-3263. https://pubs.acs.org/doi/abs/10.1021/jo00418a028.
- ↑ Binmore, Gavin T.; Della, Ernest W.; Elsey, Gordon M.; Head, Nicholas J.; Walton, John C. (April 1994). "Homolytic Reactions of Homocubane and Basketane: Rearrangement of the 9-Basketyl Radical by Multiple .beta.-Scissions". Journal of the American Chemical Society 116 (7): 2759–2766. doi:10.1021/ja00086a009. ISSN 0002-7863. http://dx.doi.org/10.1021/ja00086a009.
- ↑ Shi, Jing; Chong, Sha-Sha; Fu, Yao; Guo, Qing-Xiang; Liu, Lei (2008). "Ring Opening versus Ring Expansion in Rearrangement of Bicyclic Cyclobutylcarbinyl Radicals". The Journal of Organic Chemistry 73 (3): 974–982. doi:10.1021/jo702164r. PMID 18179235. https://resolver.caltech.edu/CaltechAUTHORS:20210902-233952044.
- ↑ Shi, Jing; Chong, Sha-Sha; Fu, Yao; Guo, Qing-Xiang; Liu, Lei (2008-02-01). "Ring Opening versus Ring Expansion in Rearrangement of Bicyclic Cyclobutylcarbinyl Radicals" (in en). The Journal of Organic Chemistry 73 (3): 974–982. doi:10.1021/jo702164r. ISSN 0022-3263. PMID 18179235. https://pubs.acs.org/doi/10.1021/jo702164r.
- ↑ 11.0 11.1 Marchand, Alan P. (1989-07-01). "Synthesis and chemistry of homocubanes, bishomocubanes, and trishomocubanes". Chemical Reviews 89 (5): 1011–1033. doi:10.1021/cr00095a004. ISSN 0009-2665. https://pubs.acs.org/doi/abs/10.1021/cr00095a004.
- ↑ Paquette, Leo A.; Boggs, Roger A.; Farnham, William B.; Beckley, Ronald S. (1975). "Silver(I) ion catalyzed rearrangements of strained .sigma. bonds. XXIX. Influence of structural features on the course of transition metal catalyzed 1,8-bishomocubane rearrangements" (in en). Journal of the American Chemical Society 97 (5): 1112–1118. doi:10.1021/ja00838a026. ISSN 0002-7863. https://pubs.acs.org/doi/abs/10.1021/ja00838a026.
- ↑ Andre Sasaki, N.; Zunker, Reinhard; Musso, Hans (1973). "Welche C–C‐Bindung wird bei der Hydrierung von Basketanderivaten geöffnet?" (in en). Chemische Berichte 106 (9): 2992–3000. doi:10.1002/cber.19731060930. ISSN 0009-2940. https://onlinelibrary.wiley.com/doi/10.1002/cber.19731060930.
- ↑ Musso, Hans (1975). "Hydrogenolyse kleiner Kohlenstoffringe, II. Über die Hydrierung von Basketan‐ und Snoutanderivaten" (in en). Chemische Berichte 108 (1): 337–356. doi:10.1002/cber.19751080143. ISSN 0009-2940. https://onlinelibrary.wiley.com/doi/10.1002/cber.19751080143.
Further reading
- Binmore, Gavin T.; Della, Ernest W.; Elsey, G. M.; Head, N. J.; Walton, J. C. (1994). "Homolytic Reactions of Homocubane and Basketane: Rearrangement of the 9-Basketyl Radical by Multiple β-Scissions". J. Am. Chem. Soc. 116 (7): 2759–2766. doi:10.1021/ja00086a009.
Original source: https://en.wikipedia.org/wiki/Basketane.
Read more |