Chemistry:4-Aminophenol

From HandWiki
Revision as of 21:35, 2 August 2023 by WikiGary (talk | contribs) (url)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
4-Aminophenol
Skeletal formula of 4-aminophenol
Space-filling model of the 4-aminophenol molecule
Names
Preferred IUPAC name
4-Aminophenol[1]
Other names
  • p-Aminophenol
  • para-Aminophenol
Identifiers
3D model (JSmol)
385836
ChEBI
ChEMBL
ChemSpider
EC Number
  • 204-616-2
2926
KEGG
MeSH Aminophenols
UNII
UN number 2512
Properties
C6H7NO
Molar mass 109.128 g·mol−1
Appearance Colorless to reddish-yellow crystals
Density 1.13 g/cm3
Melting point 187.5 °C (369.5 °F; 460.6 K)
Boiling point 284 °C (543 °F; 557 K)
1.5 g/100 mL
Solubility
log P 0.04
Acidity (pKa)
  • 5.48 (amino; H2O)
Structure
orthorhombic
Thermochemistry
-190.6 kJ/mol
Hazards
GHS pictograms GHS07: HarmfulGHS08: Health hazardGHS09: Environmental hazard
GHS Signal word Warning
H302, H332, H341, H400, H410
P201, P202, P261, P264, P270, P271, P273, P281, P301+312, P304+312, P304+340, P308+313, P312, P330, P391, P405, P501
NFPA 704 (fire diamond)
Flammability code 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oilHealth code 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformReactivity code 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no codeNFPA 704 four-colored diamond
1
2
0
Flash point 195 °C (383 °F; 468 K) (cc)
Lethal dose or concentration (LD, LC):
671 mg/kg
Related compounds
Related aminophenols
2-Aminophenol
3-Aminophenol
Related compounds
Aniline
Phenol
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☑Y verify (what is ☑Y☒N ?)
Infobox references
Tracking categories (test):

4-Aminophenol (or para-aminophenol or p-aminophenol) is the organic compound with the formula H2NC6H4OH. Typically available as a white powder,[2] it was commonly used as a developer for black-and-white film, marketed under the name Rodinal.

Reflecting its slightly hydrophilic character, the white powder is moderately soluble in alcohols and can be recrystallized from hot water. In the presence of a base, it oxidizes readily. The methylated derivatives N-methylaminophenol and N,N-dimethylaminophenol are of commercial value.

The compound is one of three isomeric aminophenols, the other two being 2-aminophenol and 3-aminophenol.

Preparation

From phenol

It is produced from phenol by nitration followed by reduction with iron. Alternatively, the partial hydrogenation of nitrobenzene affords phenylhydroxylamine, which rearranges primarily to 4-aminophenol:[3]

C6H5NO2 + 2 H2 → C6H5NHOH + H2O
C6H5NHOH → HOC6H4NH2

From nitrobenzene

It can be produced from nitrobenzene by electrolytic conversion to phenylhydroxylamine, which spontaneously rearranges to 4-aminophenol.[4]

Uses

4-Aminophenol is a building block used in organic chemistry. Prominently, it is the final intermediate in the industrial synthesis of paracetamol. Treating 4-aminophenol with acetic anhydride gives paracetamol:[5][6][7]

Synthesis of paracetamol from phenol.png

References

  1. Nomenclature of Organic Chemistry : IUPAC Recommendations and Preferred Names 2013 (Blue Book). Cambridge: The Royal Society of Chemistry. 2014. p. 690. doi:10.1039/9781849733069-FP001. ISBN 978-0-85404-182-4. 
  2. CRC Handbook of Chemistry and Physics 65th Ed.
  3. Mitchell, S.C. & Waring, R.H. "Aminophenols." In Ullmann’s Encyclopedia of Industrial Chemistry; 2002 Wiley-VCH, doi:10.1002/14356007.a02_099
  4. Polat, K.; Aksu, M.L.; Pekel, A.T. (2002), "Electroreduction of nitrobenzene to p-aminophenol using voltammetric and semipilot scale preparative electrolysis techniques", Journal of Applied Electrochemistry (Kluwer Academic Publishers) 32: 217–223, doi:10.1023/A:1014725116051 
  5. Ellis, Frank (2002). Paracetamol: a curriculum resource. Cambridge: Royal Society of Chemistry. ISBN 0-85404-375-6. 
  6. Anthony S. Travis (2007). "Manufacture and uses of the anilines: A vast array of processes and products". in Zvi Rappoport. The chemistry of Anilines Part 1. Wiley. p. 764. ISBN 978-0-470-87171-3. https://archive.org/details/chemistryaniline01rapp_644. 
  7. Elmar Friderichs; Thomas Christoph; Helmut Buschmann. "Ullmann's Encyclopedia of Industrial Chemistry". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a02_269.pub2.