Engineering:Martin 16

From HandWiki
Short description: Sailboat class

Martin 16
Martin 16 sailboat 1208.jpg
Development
DesignerDon Martin
LocationCanada
Year1995
No. built113
Builder(s)Martin Yachts
Abbott Boats
KAPE Boatworks
Boat
Boat weight730 lb (331 kg)
Hull
TypeMonohull
ConstructionFiberglass
LOA16.00 ft (4.88 m)
LWL16.00 ft (4.88 m)
Beam4.33 ft (1.32 m)
Hull draft3.33 ft (1.01 m) with keel down
Engine typenone
Hull appendages
Keel/board typelifting keel
Ballast330 lb (150 kg)
Rudder(s)transom-mounted rudder
Rig
GeneralFractional rigged sloop
Sails
Total sail area100 sq ft (9.3 m2)

The Martin 16 is a Canadian trailerable sailboat, that was designed by Don Martin of Vancouver, British Columbia, specifically as a boat for disabled sailors. It was first built in 1995.[1][2][3]

Production

The boat was first built in 1995 by Martin Yachts, who completed 58 examples. Production then passed to Abbott Boats in Sarnia, Ontario, Canada , who built a further 55 boats. The original molds were destroyed in a fire in 2006, but a new set were built in 2009 and production was restarted by KAPE Boatworks of Mississauga, Ontario. The design remains in production.[1][3][4][5][6]

Design

Martin 16s racing in the Mobility Cup 2019
Martin 16

The Martin 16 is a small recreational keelboat, built predominantly of fiberglass. It has a fractional sloop rig, a transom-hung rudder and a lifting weighted bulb keel. It displaces 730 lb (331 kg) and carries 330 lb (150 kg) of lead ballast. Both the mainsail and the jib are mounted with booms. It can fly a spinnaker of 194 sq ft (18.0 m2).[1][3][7]

Martin 16 sailors sit on a seat facing forward and all controls and lines are led to the cockpit to allow sailing without having to leave the seat. The rudder is controlled with a joystick. There is a second seat behind the command seat for a passenger or instructor. With the keel extended the boat cannot be tipped. The boat has a draft of 3.33 ft (1.01 m) with the keel extended and 1.33 ft (0.41 m) with it retracted, allowing beaching or ground transportation on a trailer.[1][3][8]

The boat is sailed like a dinghy and does not have provisions for an outboard motor.[1][3]

The design has a hull speed of 5.36 kn (9.93 km/h).[3]

Operational history

A fleet of Martin 16s is operated by Nepean Sailing Club in Ottawa, Ontario, Canada and used as the training and racing boat for their Able Sail program for disabled sailors.[9]

A similar fleet of Martin 16s has been used by Challenged Sailors San Diego from Harbor Island for their disabled sailor programming.[10]

See also

Similar sailboats

References

External links