Chemistry:Tris(2-aminoethyl)amine

From HandWiki
Revision as of 21:14, 5 February 2024 by Sherlock (talk | contribs) (fix)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Tris(2-aminoethyl)amine
Skeletal formula of tris(2-aminoethyl)amino
Names
Preferred IUPAC name
N1,N1-Bis(2-aminoethyl)ethane-1,2-diamine
Other names
  • 2,2′,2′′-Nitrilotri(ethan-1-amine)
  • 2,2′,2′′-Nitrilotriethylamine
  • 2,2′,2′′-Triaminotriethylamine
  • TAEA
Identifiers
3D model (JSmol)
1739626
ChEBI
ChEMBL
ChemSpider
EC Number
  • 223-857-4
27074
MeSH Tris(2-aminoethyl)amine
RTECS number
  • KH8587082
UNII
UN number 2922
Properties
C6H18N4
Molar mass 146.238 g·mol−1
Appearance Colorless liquid
Odor Ichtyal, ammoniacal
Density 0.976 g/mL (20 °C)[1]
Melting point −16 °C (3 °F; 257 K)
Boiling point 265 °C (509 °F; 538 K)
Miscible
log P −2.664
Vapor pressure 3 Pa (at 20 °C)
1.497[1]
Thermochemistry
−74.3–−72.9 kJ mol−1
−4860.6–−4859.2 kJ mol−1
Hazards
Safety data sheet fishersci.com
GHS pictograms GHS05: Corrosive GHS06: Toxic
GHS Signal word DANGER
H301, H310, H314
P280, P302+350, P305+351+338, P310
Flash point 113 °C (235 °F; 386 K)
Lethal dose or concentration (LD, LC):
  • 117 mg kg−1 (dermal, rabbit)
  • 246 mg kg−1 (oral, rat)
Related compounds
Related amines
Related compounds
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is ☑Y☒N ?)
Infobox references

Tris(2-aminoethyl)amine is the organic compound with the formula N(CH2CH2NH2)3. This colourless liquid is soluble in water and is highly basic, consisting of a tertiary amine center and three pendant primary amine groups. Tris(2-aminoethyl)amine is commonly abbreviated as tren or TREN. It is used a crosslinking agent in the synthesis of polyimine networks and a tripodal ligand in coordination chemistry.

Supramolecular and polymer derivatives

Tris(2-aminoethyl)amine has been used to prepare molecular capsules and related supramolecular structures.[2][3][4]

Metal complexes

Tren is a C3-symmetric, tetradentate chelating ligand that forms stable complexes with transition metals, especially those in the 2+ and 3+ oxidation states. Tren complexes exist with relatively few isomers, reflecting the constrained connectivity of this tetramine. Thus, only a single achiral stereoisomer exists for [Co(tren)X2]+, where X is halide or pseudohalide.[5] In contrast, for [Co(trien)X2]+ five diastereomers are possible, four of which are chiral. In a few cases, tren serves as a tridentate ligand with one of the primary amine groups non-coordinated. Tren is a common impurity in the more common triethylenetetramine ("trien"). As a trifunctional amine, tren forms a triisocyanate when derivatized with COCl2.

TREN is known to react fast in the presence of (aromatic) aldehydes to form an imine. During this process, water is formed, making it a condensation reaction. Due to this fast and efficient reaction, TREN is commonly used in the preparation of polyimines.[6]

Structures of trigonal bipyramidal and octahedral complexes of the formulae M(tren)X (left, C3v symmetry) and M(tren)X2 (right, Cs symmetry).

N-methylated derivatives

The permethylated derivative of tren has the formula N(CH2CH2NMe2)3. "Me6tren" forms a variety of complexes but, unlike tren, does not stabilize Co(III). Related amino-triphosphines are also well developed, such as N(CH2CH2PPh2)3 (m.p. 101-102 °C). This species is prepared from the nitrogen mustard N(CH2CH2Cl)3.[7]

N,N,N-trimethyltren, N(CH2CH2NHMe)3 is also available.[8]

Safety considerations

(H2NCH2CH2)3N, like other polyamines, is corrosive.[9] It causes severe skin burns and eye damage, is harmful if inhaled due to the destruction of respiratory tissues, is toxic if swallowed, and can be fatal in contact with skin. Its median lethal dose is 246 mg/kg, oral (rat), and 117 mg/kg, dermal (rabbit). It is also combustible.[10]

References

  1. 1.0 1.1 "Tris(2-aminoethyl)amine". Sigma-Aldrich. http://www.sigmaaldrich.com/catalog/product/aldrich/225630. 
  2. Denissen, Wim; Rivero, Guadalupe; Nicolaÿ, Renaud; Leibler, Ludwik; Winne, Johan M.; Du Prez, Filip E. (2015). "Vinylogous Urethane Vitrimers". Advanced Functional Materials 25 (16): 2451–2457. doi:10.1002/adfm.201404553. 
  3. Akinc, Akin et al. (2008). "A combinatorial library of lipid-like materials for delivery of RNAi therapeutics". Nature Biotechnology 26 (5): 561–569. doi:10.1038/nbt1402. 
  4. Gestwicki, Jason E.; Cairo, Christopher W.; Strong, Laura E.; Oetjen, Karolyn A.; Kiessling, Laura L. (2002). "Influencing Receptor−Ligand Binding Mechanisms with Multivalent Ligand Architecture". Journal of the American Chemical Society 124 (50): 14922–14933. doi:10.1021/ja027184x. PMID 12475334. 
  5. Donald A. House "Ammonia & N-donor Ligands" in Encyclopedia of Inorganic Chemistry John Wiley & Sons, 2006. doi:10.1002/0470862106.ia009.
  6. Schoustra, Sybren K.; Dijksman, Joshua A.; Zuilhof, Han; Smulders, Maarten M. J. (2021). "Molecular control over vitrimer-like mechanics – tuneable dynamic motifs based on the Hammett equation in polyimine materials". Chemical Science 12 (1): 293–302. doi:10.1039/D0SC05458E. PMID 34163597. 
  7. R. Morassi, L. Sacconi "Tetradentate Tripod Ligands Containing Nitrogen, Sulfur, Phosphorus, and Arsenic as Donor Atoms" Inorganic Syntheses 1976, vol. 16 p. 174-180. doi:10.1002/9780470132470.ch47
  8. Schmidt, H.; Lensink, C.; Xi, S. K.; Verkade, J. G. (1989). "New Prophosphatranes: Novel intermediates to five-coordinate phosphatranes". Zeitschrift für Anorganische und Allgemeine Chemie 578: 75–80. doi:10.1002/zaac.19895780109. 
  9. The Physical and Theoretical Chemistry Laboratory Oxford University MSDS
  10. "Safety Data Sheet". Sigma-Aldrich. July 1, 2014. https://www.sigmaaldrich.com/MSDS/MSDS/DisplayMSDSPage.do?country=US&language=en&productNumber=225630&brand=ALDRICH&PageToGoToURL=https%3A%2F%2Fwww.sigmaaldrich.com%2Fcatalog%2Fproduct%2Faldrich%2F225630%3Flang%3Den. Retrieved April 7, 2019.