Chemistry:Ultra-high-molecular-weight polyethylene

From HandWiki
Revision as of 00:21, 6 February 2024 by StanislovAI (talk | contribs) (over-write)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Short description: Very long-chain polyethylene with high impact strength

Ultra-high-molecular-weight polyethylene (UHMWPE, UHMW) is a subset of the thermoplastic polyethylene. Also known as high-modulus polyethylene (HMPE), it has extremely long chains, with a molecular mass usually between 3.5 and 7.5 million amu.[1] The longer chain serves to transfer load more effectively to the polymer backbone by strengthening intermolecular interactions. This results in a very tough material, with the highest impact strength of any thermoplastic presently made.[2]

UHMWPE is odorless, tasteless, and nontoxic.[3] It embodies all the characteristics of high-density polyethylene (HDPE) with the added traits of being resistant to concentrated acids and alkalis, as well as numerous organic solvents.[4] It is highly resistant to corrosive chemicals except oxidizing acids; has extremely low moisture absorption and a very low coefficient of friction; is self-lubricating (see boundary lubrication); and is highly resistant to abrasion, in some forms being 15 times more resistant to abrasion than carbon steel. Its coefficient of friction is significantly lower than that of nylon and acetal and is comparable to that of polytetrafluoroethylene (PTFE, Teflon), but UHMWPE has better abrasion resistance than PTFE.[5][6]

Development

Polymerization of UHMWPE was commercialized in the 1950s by Ruhrchemie AG,[1][7] which has changed names over the years. Today UHMWPE powder materials, which may be directly molded into a product's final shape, are produced by, Ticona, Braskem, Teijin (Endumax), Celanese, and Mitsui. Processed UHMWPE is available commercially either as fibers or in consolidated form, such as sheets or rods. Because of its resistance to wear and impact, UHMWPE continues to find increasing industrial applications, including the automotive and bottling sectors. Since the 1960s, UHMWPE has also been the material of choice for total joint arthroplasty in orthopedic and spine implants.[1]

UHMWPE fibers branded as Dyneema, commercialized in the late 1970s by the Dutch chemical company DSM, and as Spectra, commercialized by Honeywell (then AlliedSignal), are widely used in ballistic protection, defense applications, and increasingly in medical devices, sailing, hiking equipment, climbing, and many other industries.

Structure and properties

Structure of UHMWPE, with n greater than 100,000

UHMWPE is a type of polyolefin. It is made up of extremely long chains of polyethylene, which all align in the same direction. It derives its strength largely from the length of each individual molecule (chain). Van der Waals forces between the molecules are relatively weak for each atom of overlap between the molecules, but because the molecules are very long, large overlaps can exist, adding up to the ability to carry larger shear forces from molecule to molecule. Each chain is attracted to the others with so many van der Waals forces that the whole of the inter-molecular strength is high. In this way, large tensile loads are not limited as much by the comparative weakness of each localized van der Waals force.

When formed into fibers, the polymer chains can attain a parallel orientation greater than 95% and a level of crystallinity from 39% to 75%. In contrast, Kevlar derives its strength from strong bonding between relatively short molecules.

The weak bonding between olefin molecules allows local thermal excitations to disrupt the crystalline order of a given chain piece-by-piece, giving it much poorer heat resistance than other high-strength fibers. Its melting point is around 130 to 136 °C (266 to 277 °F),[8] and, according to DSM, it is not advisable to use UHMWPE fibres at temperatures exceeding 80 to 100 °C (176 to 212 °F) for long periods of time. It becomes brittle at temperatures below −150 °C (−240 °F).[9]

The simple structure of the molecule also gives rise to surface and chemical properties that are rare in high-performance polymers. For example, the polar groups in most polymers easily bond to water. Because olefins have no such groups, UHMWPE does not absorb water readily, nor wet easily, which makes bonding it to other polymers difficult. For the same reasons, skin does not interact with it strongly, making the UHMWPE fiber surface feel slippery. In a similar manner, aromatic polymers are often susceptible to aromatic solvents due to aromatic stacking interactions, an effect aliphatic polymers like UHMWPE are immune to. Since UHMWPE does not contain chemical groups (such as esters, amides, or hydroxylic groups) that are susceptible to attack from aggressive agents, it is very resistant to water, moisture, most chemicals, UV radiation, and micro-organisms.

Under tensile load, UHMWPE will deform continually as long as the stress is present—an effect called creep.

When UHMWPE is annealed, the material is heated to between 135 °C (275 °F) and 138 °C (280 °F) in an oven or a liquid bath of silicone oil or glycerine. The material is then cooled down at a rate of 5 °C/h (2.5 °F/ks) to 65 °C (149 °F) or less. Finally, the material is wrapped in an insulating blanket for 24 hours to bring to room temperature.[10]

Production

Ultra-high-molecular-weight polyethylene (UHMWPE) is synthesized from its monomer ethylene, which is bonded together to form the base polyethylene product. These molecules are several orders of magnitude longer than those of familiar high-density polyethylene (HDPE) due to a synthesis process based on metallocene catalysts, resulting in UHMWPE molecules typically having 100,000 to 250,000 monomer units per molecule each compared to HDPE's 700 to 1,800 monomers.

UHMWPE is processed variously by compression moulding, ram extrusion, gel spinning, and sintering. Several European companies began compression molding UHMWPE in the early 1960s. Gel-spinning arrived much later and was intended for different applications.

In gel spinning a precisely heated gel (of a low concentration of UHMWPE in an oil) is extruded through a spinneret. The extrudate is drawn through the air, the oil extracted with a solvent which does not affect the UHMWPE, and then dried removing the solvent. The end-result is a fiber with a high degree of molecular orientation, and therefore exceptional tensile strength. Gel spinning depends on isolating individual chain molecules in the solvent so that intermolecular entanglements are minimal. Entanglements make chain orientation more difficult, and lower the strength of the final product.[11]

Applications

Fiber

LIROS Dyneema hollow

Dyneema and Spectra are brands of lightweight high-strength oriented-strand gels spun through a spinneret. They have yield strengths as high as 2.4 GPa (350,000 psi) and density as low as 0.97 g/cm (0.087 oz/in) (for Dyneema SK75).[12] High-strength steels have comparable yield strengths, and low-carbon steels have yield strengths much lower (around 0.5 GPa (73,000 psi)). Since steel has a specific gravity of roughly 7.8, these materials have a strength-to-weight ratios eight times that of high-strength steels. Strength-to-weight ratios for UHMWPE are about 40% higher than for aramid. The high qualities of UHMWPE filament were discovered by Albert Pennings in 1968, but commercially viable products were made available by DSM in 1990 and Southern Ropes soon after.[13]

Derivatives of UHMWPE yarn are used in composite plates in armor, in particular, personal armor and on occasion as vehicle armor. Civil applications containing UHMWPE fibers are cut-resistant gloves, tear-resistant hosiery, bow strings, climbing equipment, automotive winching, fishing line, spear lines for spearguns, high-performance sails, suspension lines on sport parachutes and paragliders, rigging in yachting, kites, and kite lines for kites sports.

For personal armor, the fibers are, in general, aligned and bonded into sheets, which are then layered at various angles to give the resulting composite material strength in all directions.[14][15] Recently developed additions to the US Military's Interceptor body armor, designed to offer arm and leg protection, are said to utilize a form of UHMWPE fabric.[16] A multitude of UHMWPE woven fabrics are available in the market and are used as shoe liners, pantyhose,[17] fencing clothing, stab-resistant vests, and composite liners for vehicles.[18]

The use of UHMWPE rope for automotive winching offers several advantages over the more common steel wire. The key reason for changing to UHMWPE rope is improved safety. The lower mass of UHMWPE rope, coupled with significantly lower elongation at breaking, carries far less energy than steel or nylon, which leads to almost no snap-back. UHMWPE rope does not develop kinks that can cause weak spots, and any frayed areas that may develop along the surface of the rope cannot pierce the skin like broken wire strands can. UHMWPE rope is less dense than water, making water recoveries easier as the recovery cable is easier to locate than wire. The bright colours available also aid with visibility should the rope become submerged or dirty. Another advantage in automotive applications is the reduced weight of UHMWPE rope over steel cables. A typical 11 mm (0.43 in) UHMWPE rope of 30 m (98 ft) can weigh around 2 kg (4.4 lb), the equivalent steel wire rope would weigh around 13 kg (29 lb). One notable drawback of UHMWPE rope is its susceptibility to UV damage, so many users will fit winch covers in order to protect the cable when not in use. It is also vulnerable to heat damage from contact with hot components.

Spun UHMWPE fibers excel as fishing line, as they have less stretch, are more abrasion-resistant, and are thinner than the equivalent monofilament line.

In climbing, cord and webbing made of combinations of UHMWPE and nylon yarn have gained popularity for their low weight and bulk. They exhibit very low elasticity compared to their nylon counterparts, which translates to low toughness. The fiber's very high lubricity causes poor knot-holding ability, and it is mostly used in pre-sewn 'slings' (loops of webbing)—relying on knots to join sections of UHMWPE is generally not recommended, and if necessary it is recommended to use the triple fisherman's knot rather than the traditional double fisherman's knot.[19][20]

Ships' hawsers and cables made from the fiber (0.97 specific gravity) float on sea water. "Spectra wires" as they are called in the towing boat community are commonly used for face wires[clarification needed] as a lighter alternative to steel wires.

It is used in skis and snowboards, often in combination with carbon fiber, reinforcing the fiberglass composite material, adding stiffness and improving its flex characteristics.[clarification needed] The UHMWPE is often used as the base layer, which contacts the snow, and includes abrasives to absorb and retain wax.[clarification needed]

It is also used in lifting applications, for manufacturing low weight, and heavy duty lifting slings. Due to its extreme abrasion resistance it is also used[clarification needed] as an excellent corner protection for synthetic lifting slings.

High-performance lines (such as backstays) for sailing and parasailing are made of UHMWPE, due to their low stretch, high strength, and low weight.[21] Similarly, UHMWPE is often used for winch-launching gliders from the ground, as, in comparison with steel cable, its superior abrasion resistance results in less wear when running along the ground and into the winch, increasing the time between failures. The lower weight on the mile-long cables used also results in higher winch launches.

UHMWPE was used for the 30 km (19 mi) long, 0.6 mm (0.024 in) thick space tether in the ESA/Russian Young Engineers' Satellite 2 of September, 2007.[22]

Dyneema Composite Fabric (DCF) is a laminated material consisting of a grid of Dyneema threads sandwiched between two thin transparent polyester membranes. This material is very strong for its weight, and was originally developed for use in racing yacht sails under the name 'Cuben Fiber'. More recently it has found new applications, most notably in the manufacture of lightweight and ultralight camping and backpacking equipment such as tents and backpacks.

In archery, UHMWPE is widely used as a material for bowstrings because of its low creep and stretch compared to, for example, Dacron (PET).[citation needed] Besides pure UHMWPE fibers, most manufacturers use blends to further reduce the creep and stretch of the material. In these blends, the UHMWPE fibers are blended with, for example, Vectran.

In skydiving, UHMWPE is one of the most common materials used for suspension lines, largely supplanting the earlier-used Dacron, being lighter and less bulky.[citation needed] UHMWPE has excellent strength and wear-resistance, but is not dimensionally stable (i.e. shrinks) when exposed to heat, which leads to gradual and uneven shrinkage of different lines as they are subject to differing amounts of friction during canopy deployment, necessitating periodic line replacement. It is also almost completely inelastic, which can exacerbate the opening shock. For that reason, Dacron lines continue to be used in student and some tandem systems, where the added bulk is less of a concern than the potential for an injurious opening. In turn, in high-performance parachutes used for swooping, UHMWPE is replaced with Vectran and HMA (high-modulus aramid), which are even thinner and dimensionally stable, but exhibit greater wear and require much more frequent maintenance to prevent catastrophic failure. UHMWPE are also used for reserve parachute closing loops when used with automatic activation devices, where their extremely low coefficient of friction is critical for proper operation in the event of cutter activation.

Medical

UHMWPE has a clinical history as a biomaterial for use in hip, knee, and (since the 1980s), for spine implants.[1] An online repository of information and review articles related to medical grade UHMWPE, known as the UHMWPE Lexicon, was started online in 2000.[23]

Joint replacement components have historically been made from "GUR" resins. These powder materials are produced by Ticona, typically converted into semi-forms by companies such as Quadrant and Orthoplastics,[1] and then machined into implant components and sterilized by device manufacturers.[24]

UHMWPE was first used clinically in 1962 by Sir John Charnley and emerged as the dominant bearing material for total hip and knee replacements in the 1970s.[23] Throughout its history, there were unsuccessful attempts to modify UHMWPE to improve its clinical performance until the development of highly cross-linked UHMWPE in the late 1990s.[1]

One unsuccessful attempt to modify UHMWPE was by blending the powder with carbon fibers. This reinforced UHMWPE was released clinically as "Poly Two" by Zimmer in the 1970s.[1] The carbon fibers had poor compatibility with the UHMWPE matrix and its clinical performance was inferior to virgin UHMWPE.[1]

A second attempt to modify UHMWPE was by high-pressure recrystallization. This recrystallized UHMWPE was released clinically as "Hylamer" by DePuy in the late 1980s.[1] When gamma irradiated in air, this material exhibited susceptibility to oxidation, resulting in inferior clinical performance relative to virgin UHMWPE. Today, the poor clinical history of Hylamer is largely attributed to its sterilization method, and there has been a resurgence of interest in studying this material (at least among certain research circles).[23] Hylamer fell out of favor in the United States in the late 1990s with the development of highly cross-linked UHMWPE materials, however negative clinical reports from Europe about Hylamer continue to surface in the literature.

Highly cross-linked UHMWPE materials were clinically introduced in 1998 and have rapidly become the standard of care for total hip replacements, at least in the United States.[1] These new materials are cross-linked with gamma or electron beam radiation (50–105 kGy) and then thermally processed to improve their oxidation resistance.[1] Five-year clinical data, from several centers, are now available demonstrating their superiority relative to conventional UHMWPE for total hip replacement (see arthroplasty).[23] Clinical studies are still underway to investigate the performance of highly cross-linked UHMWPE for knee replacement.[23]

In 2007, manufacturers started incorporating anti-oxidants into UHMWPE for hip and knee arthroplasty bearing surfaces.[1] Vitamin E (a-tocopherol) is the most common anti-oxidant used in radiation-cross-linked UHMWPE for medical applications. The anti-oxidant helps quench free radicals that are introduced during the irradiation process, imparting improved oxidation resistance to the UHMWPE without the need for thermal treatment.[25] Several companies have been selling antioxidant-stabilized joint replacement technologies since 2007, using both synthetic vitamin E as well as hindered phenol-based antioxidants.[26]

Another important medical advancement for UHMWPE in the past decade has been the increase in use of fibers for sutures. Medical-grade fibers for surgical applications are produced by DSM under the "Dyneema Purity" trade name.[27]

Manufacturing

UHMWPE is used in the manufacture of PVC (vinyl) windows and doors, as it can endure the heat required to soften the PVC-based materials and is used as a form/chamber filler for the various PVC shape profiles in order for those materials to be 'bent' or shaped around a template.

UHMWPE is also used in the manufacture of hydraulic seals and bearings. It is best suited for medium mechanical duties in water, oil hydraulics, pneumatics, and unlubricated applications. It has a good abrasion resistance but is better suited to soft mating surfaces.

Wire and cable

Fluoropolymer / HMWPE insulation cathodic protection cable is typically made with dual insulation. It features a primary layer of a fluoropolymer such as ECTFE which is chemically resistant to chlorine, sulfuric acid, and hydrochloric acid. Following the primary layer is an HMWPE insulation layer, which provides pliable strength and allows considerable abuse during installation. The HMWPE jacketing provides mechanical protection as well.[28]

Marine infrastructure

UHMWPE is used in marine structures for the mooring of ships and floating structures in general. The UHMWPE forms the contact surface between the floating structure and the fixed one. Timber was and is used for this application also. UHMWPE is chosen as facing of fender systems for berthing structures because of the following characteristics:[29]

  • Wear resistance: best among plastics, better than steel
  • Impact resistance: best among plastics, similar to steel
  • Low friction (wet and dry conditions): self-lubricating material

See also

References

  1. ↑ 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 1.11 Kurtz, Steven M. (2004). The UHMWPE handbook: ultra-high molecular weight polyethylene in total joint replacement. Academic Press. ISBN 978-0-12-429851-4. https://books.google.com/books?id=bkuFjppEdMcC. 
  2. ↑ Stein, H. L. (1998). Ultrahigh molecular weight polyethylenes (uhmwpe). Engineered Materials Handbook, 2, 167–171.
  3. ↑ Wong, D. W. S.; Camirand, W. M.; Pavlath, A. E.; Krochta, J. M.; Baldwin, E. A. and Nisperos-Carriedo, M. O. (eds.) (1994) "Development of edible coatings for minimally processed fruits and vegetables" pp. 65–88 in Edible coatings and films to improve food quality, Technomic Publishing Company, Lancaster, PA. ISBN:1566761131.
  4. ↑ "PE Material: Porex Porous Polyethylene for Plastic Filter Media". http://www.porex.com/technologies/materials/porous-plastics/pe/. 
  5. ↑ Tong, Jin; Ma, Yunhai; Arnell, R. D.; Ren, Luquan (2006). "Free abrasive wear behaviour of UHMWPE composites filled with wollastonite fibres". Composites Part A: Applied Science and Manufacturing 37: 38–45. doi:10.1016/j.compositesa.2005.05.023. 
  6. ↑ Budinski, Kenneth G. (1997). "Resistance to particle abrasion of selected plastics". Wear 203–204: 302–309. doi:10.1016/S0043-1648(96)07346-2. 
  7. ↑ Die Aktivitäten der Ruhrchemie AG auf dem Gebiet der Kohlevergasung. In: Glückauf-Forschungshefte, Jg. 44 (1983), pp. 140–145.
  8. ↑ ultra high molecular weight polyethylene; UHMWPE. chemyq.com
  9. ↑ Lewin (1996-07-09) (in en). Handbook of Fiber Science and Technology Volume3: High Technology Fibers. CRC Press. ISBN 9780824794705. https://books.google.com/books?id=mrG3q9h__XYC. 
  10. ↑ Hoechst: Annealing (Stress Relief) of Hostalen GUR
  11. ↑ Pennings, A.J.; van der Hooft, R.J.; Postema, A.R.; Hoogsteen, W.; ten Brinke, G. (1986). "High-speed gel-spinning of ultra-high molecular weight polyethylene". Polymer Bulletin 16 (2–3): 167–174. doi:10.1007/BF00955487. https://pure.rug.nl/ws/files/14630135/1986PolymBullPennings.pdf. Retrieved 2019-07-13. 
  12. ↑ Crouch, Ian. 2016. The Science of Armour Materials. P229. Woodhead Publishing.
  13. ↑ "The story of Dyneema®". https://www.thedyneemaproject.com/en_GB/the-fabrics/dyneema.html. 
  14. ↑ "Dyneema". Tote Systems Australia. http://www.tote.com.au/dyneema.htm. 
  15. ↑ Bhatnagar, A. (ed.) (2006) Lightweight Ballistic Composites: Military and Law-Enforcement Applications. Honeywell International. ISBN:1855739410
  16. ↑ Monty Phan; Lou Dolinar (February 27, 2003). "Outfitting the Army of One – Technology has given today's troops better vision, tougher body armour, global tracking systems – and more comfortable underwear" (Nassau and Queens ed.). Newsday. pp. B.06. 
  17. ↑ "Sheertex creates world's toughest sheer pantyhose". Inside Textiles Ltd. 20 September 2019. https://www.knittingindustry.com/sheertex-creates-worlds-toughest-sheer-pantyhose/. 
  18. ↑ "UHMWPE Fabrics". Akiro Protech. https://akiroprotech.com/. 
  19. ↑ "Comparative Testing of High Strength Cord". 2000. http://www.xmission.com/~tmoyer/testing/High_Strength_Cord.pdf. 
  20. ↑ "Cord testing". http://www.xmission.com/~tmoyer/testing/High_Strength_Cord.pdf. 
  21. ↑ "Spectra® and Dyneema® | Bally Ribbon Mills" (in en-US). https://www.ballyribbon.com/fibers/spectra-dyneema/. 
  22. ↑ Katharine Sanderson (2007-09-26). "Dropping a line from space". Nature 449 (7161): 387. doi:10.1038/449387a. PMID 17898730. Bibcode: 2007Natur.449..387S. 
  23. ↑ 23.0 23.1 23.2 23.3 23.4 UHMWPE Lexicon. Uhmwpe.org. Retrieved on 2012-06-30.
  24. ↑ GHR HMW-PE and VHMW-PE. ticona.com
  25. ↑ Wannomae, K. K., Micheli, B. R.; Lozynsky, A. J. and Muratoglu, O. K. (2010) "A new method of stabilising irradiated UHMWPE using Vitamin E and mechanical annealing". 56th Annual Meeting of the Orthopedic Research Society, 2290.
  26. ↑ Spiegelberg, S.H. (2012). "UHMWPE for total joint arthroplasty: Past, present, and future". https://bonezonepub.com/2012/06/09/uhmwpe-for-total-joint-arthroplasty-past-present-and-future/. 
  27. ↑ "DSM introduces Dyneema Purity® Black fiber, the first black medical-grade UHMWPE fiber". 2017. https://www.dsm.com/biomedical/en_US/media-events/press-releases/2017/2017-03-07-dsm-introduces-dyneema-purity-black-fiber.html. 
  28. ↑ "Cathodic Protection" . Performance of XLPE cable.
  29. ↑ "UHMWPE for marine structures". https://u-hubs.com/uhmwpe-for-marine-structures/. 

Further reading

  • Southern et al., The Properties of Polyethylene Crystallized Under the Orientation and Pressure Effects of a Pressure Capillary Viscometer, Journal of Applied Polymer Science vol. 14, pp. 2305–2317 (1970).
  • Kanamoto, On Ultra-High Tensile by Drawing Single Crystal Mats of High Molecular Weight Polyethylene, Polymer Journal vol. 15, No. 4, pp. 327–329 (1983).

External links



Retrieved from "https://handwiki.org/wiki/index.php?title=Chemistry:Ultra-high-molecular-weight_polyethylene&oldid=3330323"