Biology:Woodchips

From HandWiki
(Redirected from Biology:Woodchipping)
Short description: Small pieces of wood made when shredding larger pieces of wood
Woodchips, with hand for scale

Woodchips are small- to medium-sized pieces of wood formed by cutting or chipping larger pieces of wood such as trees, branches, logging residues, stumps, roots, and wood waste.[1][2]

Woodchips may be used as a biomass solid fuel and are raw material for producing wood pulp.[3] They may also be used as an organic mulch in gardening, landscaping, and ecosystem restoration; in bioreactors for denitrification;[4] and as a substrate for mushroom cultivation.[5]

The process of making woodchips is called wood chipping and is done using a wood chipper. The types of woodchips formed following chipping is dependent on the type of wood chipper used and the material from which they are made.[6] Woodchip varieties include: forest chips (from forested areas), wood residue chips (from untreated wood residues, recycled wood and off-cuts), sawing residue chips (from sawmill residues), and short rotation forestry chips (from energy crops).[6]

Raw materials

Woodchips waiting to be loaded at Albany Port in Western Australia

The raw materials of woodchips can be pulpwood, waste wood, and residual wood from agriculture, landscaping, logging, and sawmills.[7] Woodchips can also be produced from remaining forestry materials including tree crowns, branches, unsaleable materials or undersized trees.[8]

Wood chipper

Forestry operations provide the raw materials needed for woodchip production.[9] Almost any tree can be converted into woodchips, however, the type and quality of the wood used to produce woodchips depends largely on the market.[1] Softwood species, for instance, tend to be more versatile for use as woodchips than hardwood species because they are less dense and faster growing.[1]

Production

A wood chipper is a machine used for cutting wood into smaller pieces (chips).[10] There are several types of wood chippers, each having a different use depending on the type of processing the woodchips will undergo.[11]

Pulp and paper industry

Woodchips used for chemical pulp must be relatively uniform in size and free of bark. The optimum size varies with the wood species.[12] It is important to avoid damage to the wood fibres as this is important for the pulp properties. For roundwood it is most common to use disk chippers. A typical size of the disk is 2.0–3.5 m in diameter, 10–25 cm in thickness and weight is up to 30 tons. The disk is fitted with 4 to 16 knives and driven with motors of ½ –2 MW.[12] Drum chippers are normally used for wood residuals from saw mills or other wood industry.[12]

Methods of conveyance

There are four potential methods to move woodchips: pneumatic, conveyor belt, hopper with direct chute, and batch system (manual conveyance).[13][unreliable source?][14]

Types of wood chippers

Disk

A disk wood chipper features a flywheel made of steel and chopping blades with slotted disks. The blades slice through the wood as the material is fed through the chute. Knives located in the throat of the chipper cuts the wood in the opposite direction. The design is not as energy efficient as other styles but produces consistent shapes and sizes of woodchips.[15][16]

Drum

A drum wood chipper has a rotating parallel-sided drum attached to the engine with reinforced steel blades attached in a horizontal direction. Wood is drawn into the chute by gravity and the rotation of the drum where it is broken up by the steel blades. The drum type is noisy and creates large uneven chips but are more energy efficient than the disk type.[15][16]

Screw-type

A screw-type wood chipper contains a conical, screw-shaped blade {citation needed}. The blade rotation is set parallel to the opening so wood is pulled into the chipper by the spiral motion. Screw-type, also called high-torque rollers, are popular for residential use due to being quiet, easy to use and safer than disk and drum types.[15][17]

Applications

Woodchips are used primarily as a raw material for technical wood processing. In industry, processing of bark chips is often separated after peeling the logs due to different chemical properties.

Wood pulp

Only the heartwood and sapwood are useful for making pulp. Bark contains relatively few useful fibres and is removed and used as fuel to provide steam for use in the pulp mill. Most pulping processes require that the wood be chipped and screened to provide uniform sized chips.[citation needed]

Mulch

Woodchips are also used as landscaping and garden mulch, for water conservation, weed control, and reducing and preventing soil erosion. Woodchips when used as a mulch are at least three inches thick. It has a mixed reputation in gardening.

It has been promoted for use in habitat restoration projects. As the ramial chipped wood decomposes it improves the soil structure, permeability, bioactivity, and nutrient availability of the soil.

Playground surfacing

Woodchips do not meet American Society for Testing and Materials standards for use as playground surfacing material, and as of 2011 are illegal to use as playground surfacing in the US, not being ADA-approved according to US department of Justice guidelines.[18]

Barbecuing

Woodchips can also be used to infuse flavor and enhance the smoky taste to barbecued meats and vegetables. Several different species of wood can be used depending on the type of flavor wanted. For a mild, sweet fruity flavor, apple wood can be used while hickory gives a smoky, bacon-like flavor. Other different types of wood used are cherry, mesquite and pecan.[19]

Denitrifying woodchip bioreactor

Woodchips can be loaded into a 'denitrifying woodchip bioreactor' which has been used for several decades as an emerging biotechnology to treat agricultural wastewater by removing nitrates.[20][21][22][23] It is a subsurface system where denitrification by micro-organisms utilizing a carbon source (as electron donor) reduces the nitrate into a harmless nitrogen gas.[21] Denitrifying woodchip bioreactor have a low construction and operational costs with a comparatively long lifespan going up to 15 years.[24] The interest in such a technique has grown in recent years and has expanded into the mining industry.[25][26]

A 2013 experiment showed that after 70 days of startup, a woodchip pile loaded with liquid pig manure at 5 L/m2/day removed an average of 90% of nitrate after one month.[27] However, if the environmental conditions do not support complete denitrification, undesirable greenhouse gas such as nitrous oxide gas and methane could be produced.[20][28][29][30][31]

Fuel

Woody chips left for drying before transport to industrial off-takers in Namibia

Woodchips have been traditionally used as solid fuel for space heating or in energy plants to generate electric power from renewable energy. The main source of forest chips in Europe and in most of the countries[which?] have been logging residues. It is expected that the shares of stumps and roundwood will increase in the future.[32] (As of 2013) in the EU, the estimates for biomass potential for energy, available under current 2018 conditions including sustainable use of the forest as well as providing wood to the traditional forest sectors, are: 277 million m3, for above ground biomass and 585 million m3 for total biomass.[33]

The newer fuel systems for heating use either woodchips or wood pellets. The advantage of woodchips is cost, the advantage of wood pellets is the controlled fuel value. The use of woodchips in automated heating systems, is based on a robust technology.[32]

The size of the woodchips, moisture content, and the raw material from which the chips are made are particularly important when burning wood chips in small plants. Unfortunately, there are not many standards to decide the fractions of woodchip. However, as of March 2018, The American National Standards Institute approved AD17225-4 Wood Chip Heating Fuel Quality Standard. The full title of the standard is: ANSI/ASABE AD17225-4:2014 FEB2018 Solid Biofuels—Fuel Specifications and classes—Part 4: Graded wood chips.[34] One common chip category is the GF60 which is commonly used in smaller plants, including small industries, villas, and apartment buildings. "GF60" is known as "Fine, dry, small chips". The requirements for GF60 are that the moisture is between 10 and 30% and the fractions of the woodchips are distributed as follows: 0–3.5mm: <8%, 3.5–30mm: <7%, 30–60 mm: 80–100%, 60–100 mm: <3%, 100–120 mm: <2%.[32]

The energy content in one cubic metre is normally higher than in one cubic metre wood logs, but can vary greatly depending on moisture. The moisture is decided by the handling of the raw material. If the trees are taken down in the winter and left to dry for the summer (with teas in the bark and covered so rain can't reach to them), and is then chipped in the fall, the woodchips' moisture content will be approximately 20–25%. The energy content, then, is approximately 3.5–4.5kWh/kg (~150–250 kg/cubic metre).[32]

Coal power plants have been converted to run on woodchips, which is fairly straightforward to do, since they both use an identical steam turbine heat engine, and the cost of woodchip fuel is comparable to coal.[32]

Solid biomass is an attractive fuel for addressing the concerns of the energy crisis and climate change, since the fuel is affordable, widely available, close to carbon neutral and thus climate-neutral in terms of carbon dioxide (CO2), since in the ideal case only the carbon dioxide which was drawn in during the tree's growth and stored in the wood is released into the atmosphere again.[32]

Waste and emissions

Compared to the solid waste disposal problems of coal and nuclear fuels, woodchip fuel's waste disposal problems are less grave; in a study from 2001 fly ash from woodchip combustion had 28.6 mg cadmium/kg dry matter. Compared to fly ash from burning of straw, cadmium was bound more heavily, with only small amounts of cadmium leached. It was speciated as a form of cadmium oxide, cadmium silicate (CdSiO3); authors noted that adding it to agricultural or forest soils in the long-term could cause a problem with accumulation of cadmium.[35]

Like coal, wood combustion is a known source of mercury emissions, particularly in northern climates during winter. The mercury is both gaseous as elemental mercury (especially when wood pellets are burned) or mercury oxide, and solid PM2.5 particulate matter when untreated wood is used.[36]

When wood burning is used for space heating, indoor emissions of 1,3-butadiene, benzene, formaldehyde and acetaldehyde, which are suspected or known carcinogenic compounds, are elevated. The cancer risk from these after exposure to wood smoke is estimated to be low in developed countries.[37]

Certain techniques for burning woodchips result in the production of biochar – effectively charcoal – which can be either utilised as charcoal, or returned to the soil, since wood ash can be used as a mineral-rich plant fertilizer. The latter method can result in an effectively carbon-negative system, as well as acting as a very effective soil conditioner, enhancing water and nutrient retention in poor soils.[38]

Automated handling of solid fuel

Unlike the smooth, uniform shape of manufactured wood pellets, woodchip sizes vary and are often mixed with twigs and sawdust. This mixture has a higher probability of jamming in small feed mechanisms. Thus, sooner or later, one or more jams is likely to occur. This reduces the reliability of the system, as well as increasing maintenance costs. Despite what some pellet stove manufacturers may say, researchers who are experienced with woodchips, say they are not compatible with the 2 inch (5 cm) auger used in pellet stoves.[13]

Comparison to other fuels

Woodchips are similar to wood pellets, in that the movement and handling is more amenable to automation than cord wood, particularly for smaller systems. Woodchips are less expensive to produce than wood pellets, which must be processed in specialized facilities. While avoiding the costs associated with refinement, the lower density and higher moisture content of woodchips reduces their calorific value, substantially increasing the feedstock needed to generate an equivalent amount of heat. Greater physical volume requirements also increase the expense and emissions impact of trucking, storing and/or shipping the wood.

Woodchips are less expensive than cord wood, because the harvesting is faster and more highly automated. Woodchips are of greater supply, partly because all parts of a tree can be chipped, whereas small limbs and branches can require substantial labor to convert to cord wood. Cord wood generally needs to be "seasoned" or "dry" before it can be burned cleanly and efficiently. On the other hand, woodchip systems are typically designed to cleanly and efficiently burn "green chips" with very high moisture content of 43–47% (wet basis).[13] (see gasification and woodgas)

Environmental aspects

Compared to conventional timber harvesting, woodchip harvesting has a greater impact on the environment, since a larger proportion of biomass is removed.[39] Increased use of woodchips can have negative effects on the stability and long-term growth of the forests in which they're removed from. For instance, chipping of trees from forests has been shown to increase the removal of plant nutrients and organic matter from an ecosystem, thereby reducing both the nutrients and humus content of the soil.[39] One option to balance the negative effects of woodchip harvesting is to return the woodchip ash to the forest which would restore some of the lost nutrients back into the soil.[39]

If woodchips are harvested as a by-product of sustainable forestry practices, then this is considered a source of renewable energy.[40]

Theoretically, whole-tree chip harvesting does not have as high a solar energy efficiency compared to short rotation coppice; however, it can be an energy-efficient and low-cost method of harvesting.[41]

Waste processing

Woodchips and bark chips can be used as bulking agents in industrial composting of municipal biodegradable waste, particularly biosolids.[42]

Forest fire prevention

Woodchip harvesting can be used in concert with creating man-made firebreaks, which are used as barriers to the spread of wildfire. Undergrowth coppice is ideal for chipping, and larger trees may be left in place to shade the forest floor and reduce the rate of fuel accumulation.[citation needed]

Market products, supply and demand

United States

Woodchip costs usually depend on such factors as the distance from the point of delivery, the type of material (such as bark, sawmill residue or whole-tree chips), demand by other markets and how the wood fuel is transported. Chips delivered directly to the (powerplant) station by truck are less expensive than those delivered ... and shipped by railcar. The range of prices is typically between US$18 to US$30 per (wet)-ton delivered.[43]

In 2006, prices were US$15 and US$30 per wet-ton in the northeast.[44]

In the 20 years leading up to 2008, prices have fluctuated between US$60–70/oven-dry metric ton (odmt) in the southern states, and between US$60/odmt and US$160/odmt in the Northwest.[45]

Canada

Wood chips have been used as a source of single-dwelling heating in Canada since the early days of settling but the development of oil and natural gas has dramatically decreased its usage. Most of the wood chip usage is by installations such as schools, hospitals and prisons. Prince Edward Island (PEI) has the most wood-chip plants due to high electricity rates and subsidies from the federal government. Nova Scotia has a 2.5 MW wood chip burning system that provides power to a textile factory as well as systems that provide power to a poultry processing plant, two hospitals and an agricultural college.[46]

The University of New Brunswick operates a wood chip burning furnace system to supply heat to the university, several industrial buildings, an apartment complex and a hospital.[46] Usage of wood chips for heat is low in Quebec due to low hydroelectricity rates but a small town is using wood chips as an alternative to road salt for icy roads. EMC3 Technologies started producing wood chips coated with magnesium chloride in November 2017 for the town and has claimed it maintains traction in -30 degrees Celsius compared to regular road salt at -15 degrees Celsius.[47] In Ontario, wood chip operations include a college in Brockville, a few secondary schools in Northern Ontario as well as a chip-fired boiler at the National Forestry Institute in Petawawa.[46] In the late 1980s, the Ontario provincial government in conjunction with the federal government subsidized building three co-generation plants next to sawmills. The first one was constructed in 1987 in Chapleau followed by a plant built in Cochrane in 1989 and the largest one in Kirkland Lake which was built in 1991.[46]

Europe

Large wood chipper in Germany

In several well wooded European countries (e.g. Austria, Finland, Germany, Sweden) woodchips are becoming an alternative fuel for family homes and larger buildings due to the abundant availability of woodchips, which result in low fuel costs. The European Union is promoting woodchips for energy production in the EU Forest action plan 2007–2011. The total long term potential of woodchips in the EU is estimated to be 913 million m3.[33]

Japan

Woodchips are used in Japan for the paper manufacturing industry. Large supplies of softwood chips are imported from countries such as the United States and Australia for this purpose.[48]

See also

References

  1. ↑ 1.0 1.1 1.2 Janssen, Rainer; Rutz, Dominik (2011-11-03) (in en). Bioenergy for Sustainable Development in Africa. Springer Science & Business Media. ISBN 9789400721814. https://books.google.com/books?id=LAiGEDxN4moC&q=Woodchips&pg=PA69. 
  2. ↑ Energy Solutions, Hotel (February 2018). "Biomass - Wood Chips and Wood Pellets - Heating Systems". Intelligent Energy Europe: 3. http://cf.cdn.unwto.org/sites/all/files/docpdf/re21biomass-woodchipsandwoodpellets-heatingsystemsfaq.pdf. 
  3. ↑ GB, Forestry Commission. "Wood chips". https://www.forestry.gov.uk/fr/beeh-9ujn3d. 
  4. ↑ Lopez-Ponnada, E. V.; Lynn, T. J.; Peterson, M.; Ergas, S. J.; Mihelcic, J. R. (2017-05-01). "Application of denitrifying wood chip bioreactors for management of residential non-point sources of nitrogen". Journal of Biological Engineering 11: 16. doi:10.1186/s13036-017-0057-4. PMID 28469703. 
  5. ↑ Royse, Daniel J.; Sanchez-Vazquez, Jose E. (2001-02-01). "Influence of substrate wood-chip particle size on shiitake (Lentinula edodes) yield" (in en). Bioresource Technology 76 (3): 229–233. doi:10.1016/S0960-8524(00)00110-3. ISSN 0960-8524. PMID 11198174. 
  6. ↑ 6.0 6.1 GB, Forestry Commission. "Wood chips" (in en-gb). https://www.forestry.gov.uk/fr/beeh-9ujn3d. 
  7. ↑ "Woodwaste". May 2014. https://www2.gov.bc.ca/assets/gov/farming-natural-resources-and-industry/agriculture-and-seafood/agricultural-land-and-environment/strengthening-farming/farm-practices/870218-61_woodwaste.pdf. 
  8. ↑ "Wood Energy from Farm Forests". November 2009. https://www.teagasc.ie/media/website/crops/forestry/advice/Teagasc_wood_energy_guide_edition3.pdf. 
  9. ↑ "Wood Energy from Farm Forests". November 2009. https://www.teagasc.ie/media/website/crops/forestry/advice/Teagasc_wood_energy_guide_edition3.pdf. 
  10. ↑ "the definition of woodchipper". http://www.dictionary.com/browse/woodchipper. 
  11. ↑ Döring, Stefan (2012-10-19) (in en). Power from Pellets: Technology and Applications. Springer Science & Business Media. ISBN 9783642199622. https://books.google.com/books?id=NU-NhpbJxFsC&q=types+of+wood+chippers&pg=PA78. 
  12. ↑ 12.0 12.1 12.2 Sixta, Herbert, ed (2006). Handbook of pulp. 1. Winheim, Germany: Wiley-VCH. pp. 79–88. ISBN 978-3-527-30997-9. 
  13. ↑ 13.0 13.1 13.2 VTHR Green wood Chip Furnace
  14. ↑ BIOMASS ENERGY. State of the Technology, Present Obstacles & Future Potential; Fuel Handling Equipment Report for:United States Department of Energy, Conservation and Renewable Energy, Office of Energy Related Inventions. Larry Dobson, Northern Light Research & Development. June 23, 1993
  15. ↑ 15.0 15.1 15.2 "Machines to produce woodchips from biomass of landscape conservation and maintenance work (LCMW) - greenGain.eu" (in en-GB). greenGain.eu. 2015-09-23. https://greengain.eu/2015/09/23/what-is-going-on-in-the-pool-2/. 
  16. ↑ 16.0 16.1 "Wood Energy - Wood Harvesting Equipment" (in en). http://www.woodenergy.ie/woodharvestingequipment/. 
  17. ↑ "Wood Chipper & Wood Shredder Guide | Landpower UK | Landpower Machinery - Templecombe, Somerset, Dorset, Hampshire, Wiltshire & Devon" (in en). http://www.landpoweruk.com/content/28-wood-chipper-wood-shredder-guide-landpower-uk. 
  18. ↑ Marshall, Mike (March 25, 2011). "Playground Surfacing Materials ADA-Approved and Non-Approved". https://www.ncemch.org/child-care-health-consultants/Part2/2-4_playground_surfacing.pdf. 
  19. ↑ "How to Use Smoking Woods". https://www.weber.com/US/en/blog/smoking-woods-strike-while-the-grill-is-hot. 
  20. ↑ 20.0 20.1 Warneke, S; Schipper, L. A.; Bruesewitz, D. A.; Baisden, W. T. (2011). "A comparison of different approaches for measuring denitrification rates in a nitrate removing bioreactor". Water Research 45 (14): 4141–51. doi:10.1016/j.watres.2011.05.027. PMID 21696799. Bibcode: 2011WatRe..45.4141W. 
  21. ↑ 21.0 21.1 Christianson, Laura; Helmers, Matthew; Bhandari, Alok; Moorman, Thomas (2013-03-01). "Internal hydraulics of an agricultural drainage denitrification bioreactor" (in en). Ecological Engineering 52: 298–307. doi:10.1016/j.ecoleng.2012.11.001. ISSN 0925-8574. https://www.sciencedirect.com/science/article/pii/S0925857412003424. 
  22. ↑ Addy, Kelly; Gold, Arthur J.; Christianson, Laura E.; David, Mark B.; Schipper, Louis A.; Ratigan, Nicole A. (May 2016). "Denitrifying Bioreactors for Nitrate Removal: A Meta-Analysis" (in en). Journal of Environmental Quality 45 (3): 873–881. doi:10.2134/jeq2015.07.0399. PMID 27136153. Bibcode: 2016JEnvQ..45..873A. 
  23. ↑ Feyereisen, Gary W.; Moorman, Thomas B.; Christianson, Laura E.; Venterea, Rodney T.; Coulter, Jeffrey A.; Tschirner, Ulrike W. (May 2016). "Performance of Agricultural Residue Media in Laboratory Denitrifying Bioreactors at Low Temperatures" (in en). Journal of Environmental Quality 45 (3): 779–787. doi:10.2134/jeq2015.07.0407. PMID 27136142. Bibcode: 2016JEnvQ..45..779F. http://doi.wiley.com/10.2134/jeq2015.07.0407. 
  24. ↑ Schipper, Louis A.; Robertson, Will D.; Gold, Arthur J.; Jaynes, Dan B.; Cameron, Stewart C. (2010-11-01). "Denitrifying bioreactors—An approach for reducing nitrate loads to receiving waters" (in en). Ecological Engineering. Managing Denitrification in Human Dominated Landscapes 36 (11): 1532–1543. doi:10.1016/j.ecoleng.2010.04.008. ISSN 0925-8574. https://www.sciencedirect.com/science/article/pii/S0925857410000807. 
  25. ↑ Zaitsev, Gennadi; Mettänen, Tarja; Langwaldt, Jörg (2008-01-01). "Removal of ammonium and nitrate from cold inorganic mine water by fixed-bed biofilm reactors" (in en). Minerals Engineering. Selected papers from Bio and Hydrometallurgy '07, Falmouth, UK, May 2007 21 (1): 10–15. doi:10.1016/j.mineng.2007.08.014. ISSN 0892-6875. Bibcode: 2008MiEng..21...10Z. https://www.sciencedirect.com/science/article/pii/S0892687507002300. 
  26. ↑ Nordström, Albin; Herbert, Roger B. (2019-02-01). "Identification of the temporal control on nitrate removal rate variability in a denitrifying woodchip bioreactor" (in en). Ecological Engineering 127: 88–95. doi:10.1016/j.ecoleng.2018.11.015. ISSN 0925-8574. https://www.sciencedirect.com/science/article/pii/S0925857418304269. 
  27. ↑ Carney, K. N.; Rodgers, M; Lawlor, P. G.; Zhan, X (2013). "Treatment of separated piggery anaerobic digestate liquid using woodchip biofilters". Environmental Technology 34 (5–8): 663–70. doi:10.1080/09593330.2012.710408. PMID 23837316. Bibcode: 2013EnvTe..34..663C. 
  28. ↑ Ghane, E; Fausey, N. R.; Brown, L. C. (2015). "Modeling nitrate removal in a denitrification bed". Water Research 71: 294–305. doi:10.1016/j.watres.2014.10.039. PMID 25638338. Bibcode: 2015WatRe..71..294G. 
  29. ↑ Nordström, Albin; Herbert, Roger B. (2018-01-01). "Determination of major biogeochemical processes in a denitrifying woodchip bioreactor for treating mine drainage" (in en). Ecological Engineering 110: 54–66. doi:10.1016/j.ecoleng.2017.09.018. ISSN 0925-8574. https://www.sciencedirect.com/science/article/pii/S0925857417305578. 
  30. ↑ Nordström, Albin; Hellman, Maria; Hallin, Sara; Herbert, Roger B. (January 2021). "Microbial controls on net production of nitrous oxide in a denitrifying woodchip bioreactor" (in en). Journal of Environmental Quality 50 (1): 228–240. doi:10.1002/jeq2.20181. ISSN 0047-2425. PMID 33270921. Bibcode: 2021JEnvQ..50..228N. https://onlinelibrary.wiley.com/doi/10.1002/jeq2.20181. 
  31. ↑ Davis, Morgan P.; Martin, Emily A.; Moorman, Thomas B.; Isenhart, Thomas M.; Soupir, Michelle L. (2019-07-15). "Nitrous oxide and methane production from denitrifying woodchip bioreactors at three hydraulic residence times" (in en). Journal of Environmental Management 242: 290–297. doi:10.1016/j.jenvman.2019.04.055. ISSN 0301-4797. PMID 31054393. https://www.sciencedirect.com/science/article/pii/S0301479719305225. 
  32. ↑ 32.0 32.1 32.2 32.3 32.4 32.5 "Wooden Chips". 2018. http://www.createwood.com/products/wooden-chips/. 
  33. ↑ 33.0 33.1 Díaz-Yáñez O, Mola-Yudego, B; Anttila P, Röser D, Asikainen A. (2013). "Forest chips for energy in Europe: current procurement methods and potentials". Renewable and Sustainable Energy Reviews 21: 562–571. doi:10.1016/j.rser.2012.12.016. 
  34. ↑ "wood-chip-standard" (in en). https://www.woodchipstandard.org/. 
  35. ↑ Hansen, H. K.; Pedersen, A. J.; Ottosen, L. M.; Villumsen, A (2001). "Speciation and mobility of cadmium in straw and wood combustion fly ash". Chemosphere 45 (1): 123–8. doi:10.1016/s0045-6535(01)00026-1. PMID 11572586. Bibcode: 2001Chmsp..45..123H. 
  36. ↑ Huang, J; Hopke, P. K.; Choi, H. D.; Laing, J. R.; Cui, H; Zananski, T. J.; Chandrasekaran, S. R.; Rattigan, O. V. et al. (2011). "Mercury (Hg) emissions from domestic biomass combustion for space heating". Chemosphere 84 (11): 1694–9. doi:10.1016/j.chemosphere.2011.04.078. PMID 21620435. Bibcode: 2011Chmsp..84.1694H. 
  37. ↑ Rilo, H. L.; Zeng, Y; Alejandro, R; Carroll, P. B.; Bereiter, D; Venkataramanan, R; Tzakis, A. G.; Starzl, T. E. et al. (1991). "Effect of FK 506 on function of human islets of Langerhans". Transplantation Proceedings 23 (6): 3164–5. PMID 1721393. 
  38. ↑ Chalker-Scott, Linda (December 2007). "Impact of Mulches on Landscape Plants and the Environment - A Review". Journal of Environmental Horticulture 25 (4): 239–249. doi:10.24266/0738-2898-25.4.239. http://extension.oregonstate.edu/lane/sites/default/files/documents/soileffectsofmulching.pdf. 
  39. ↑ 39.0 39.1 39.2 "Environmental Issues During the Production and Handling of Wood Fuels". March 2004. http://www.videncenter.dk/Groenne%20trae%20haefte/Groen_Engelsk/Kap_05.pdf. 
  40. ↑ "Large Scale Power Generation Using Forestry and Wood Industry By Products". IEA Greenhouse Gas R&D Programme. November 1999. http://www.ieaghg.org/docs/General_Docs/Reports/PH3_11%20-%20Wood%20industry%20wastes%20for%20power%20gen.pdf. 
  41. ↑ Dou, Chang; Marcondes, Wilian F.; Djaja, Jessica E.; Bura, Renata; Gustafson, Rick (2017-06-05). "Can we use short rotation coppice poplar for sugar based biorefinery feedstock? Bioconversion of 2-year-old poplar grown as short rotation coppice". Biotechnology for Biofuels 10: 144. doi:10.1186/s13068-017-0829-6. PMID 28592993. 
  42. ↑ Malinska, Krystyna; Zabochnick, A-Swiatek (2013). "Selection of bulking agents for composting of sewage sludge". Environment Protection Engineering 39 (2): 91–103. doi:10.37190/epe130209. http://epe.pwr.wroc.pl/2013/2-2013/Malinska_2-2013.pdf. 
  43. ↑ Woodchip price factors for a power Generating Station in Burlington, VT, US
  44. ↑ Vermont Heat Research – An Experimental Wood Chip Furnace
  45. ↑ First quarter wood chip costs up almost 50% in western US, but pulpmills in the US South experienced only small upward price adjustments
  46. ↑ 46.0 46.1 46.2 46.3 Consulting Services, Flann (April 2018). "Woodchip Combustion in Eastern Canada". R.E.A.P. Canada: 1–33. https://www.reap-canada.com/online_library/agri_fibres_forestry/29%20Woodchip%20Combustion.pdf. 
  47. ↑ "Quebec town swaps out salt for eco-friendly wood chips on icy roads | CBC News" (in en-US). CBC. http://www.cbc.ca/news/canada/montreal/rosemere-wood-chips-1.4499146. 
  48. ↑ "Good development for the Japanese wood chip market". ITTO (Fordaq S.A.). 15 May 2014. http://www.fordaq.com/fordaq/news/Japan_wood_chip_market_37038.html. 

External links



Retrieved from "https://handwiki.org/wiki/index.php?title=Biology:Woodchips&oldid=3722589"