Chemistry:DABCO

From HandWiki
DABCO
DABCO (bridgehead) V1.svg
DABCO-3D-balls.png
Names
Preferred IUPAC name
1,4-Diazabicyclo[2.2.2]octane
Other names
Triethylenediamine, TEDA
Identifiers
3D model (JSmol)
ChEBI
ChEMBL
ChemSpider
EC Number
  • 205-999-9
UNII
Properties
C6H12N2
Molar mass 112.176 g·mol−1
Appearance White crystalline powder
Melting point 156 to 160 °C (313 to 320 °F; 429 to 433 K)
Boiling point 174 °C (345 °F; 447 K)
Soluble, hygroscopic
Acidity (pKa) 3.0, 8.8 (in water, for conjugated acid)[1]
Hazards
Main hazards Harmful
GHS pictograms GHS02: FlammableGHS05: CorrosiveGHS07: Harmful
GHS Signal word Danger
H228, H302, H315, H319, H335, H412
P210, P261, P273, P305+351+338
NFPA 704 (fire diamond)
Flash point 62 °C (144 °F; 335 K)
Related compounds
Related compounds
Quinuclidine
Tropane
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☑Y verify (what is ☑Y☒N ?)
Infobox references
Tracking categories (test):

DABCO (1,4-diazabicyclo[2.2.2]octane), also known as triethylenediamine or TEDA, is a bicyclic organic compound with the formula N2(C2H4)3. This colorless solid is a highly nucleophilic tertiary amine base, which is used as a catalyst and reagent in polymerization and organic synthesis.[3]

It is similar in structure to quinuclidine, but the latter has one of the nitrogen atoms replaced by a carbon atom. Regarding their structures, both DABCO and quinuclidine are unusual in that the methylene hydrogen atoms are eclipsed within each of the three ethylene linkages. Furthermore, the diazacyclohexane rings, of which there are three, adopt the boat conformations, not the usual chair conformations.

Reactions

The pKa of [HDABCO]+ (the protonated derivative) is 8.8, which is almost the same as ordinary alkylamines. The nucleophilicity of the amine is high because the amine centers are unhindered. It is sufficiently basic to promote a variety of coupling reactions.

Catalyst

DABCO is used as a nucleophilic catalyst for:

The scheme of Baylis Hilman reaction.

Lewis base

thumb|left|110px The reagent Selectfluor is derived by alkylation of DABCO with dichloromethane following by treatment with fluorine. A colourless salt that tolerates air, Selectfluor has been commercialized for use for electrophilic fluorination.[6]

As an unhindered amine, it is a strong ligand and Lewis base. It forms a crystalline 2:1 adduct with hydrogen peroxide[7] and sulfur dioxide.[8]

Quencher of singlet oxygen

DABCO and related amines are quenchers of singlet oxygen and effective antioxidants,[9] and can be used to improve the lifetime of dyes. This makes DABCO useful in dye lasers and in mounting samples for fluorescence microscopy (when used with glycerol and PBS).[10] DABCO can also be used to demethylate quaternary ammonium salts by heating in dimethylformamide (DMF).[11]

Production

It is produced by thermal reactions of compounds of the type H2NCH2CH2X (X = OH, NH2, or NHR) in the presence of zeolitic catalysts. An idealized conversion is shown for the conversion from ethanolamine:[12]

3 H2NCH2CH2OH → N(CH2CH2)3N + NH3 + 3 H2O

Uses

In chemical and biological defense, activated carbon is impregnated with DABCO for use in filters for masks, collective protection systems, and the like.[13]

References

  1. D. H. Ripin; D. A. Evans (2002). "pKa's of Nitrogen Acids". http://mysite.science.uottawa.ca/abeauche/chm4328/chm4328lecture2-evanspka_tables.pdf. 
  2. "Safety data for 1,4-diazabicyclo[2.2.2octane (see MSDS)"]. Sigma-Aldrich. http://www.sigmaaldrich.com/catalog/product/sial/d27802?lang=en&region=GB. 
  3. Uppuluri V. Mallavadhani, Nicolas Fleury-Bregeot. "1,4-Diazabicyclo [2.2.2]octane". In Encyclopedia of Reagents for Organic Synthesis, 2010, John Wiley & Sons, Ltd. doi:10.1002/047084289X.rd010m.pub2
  4. "Polyurethane additives guide". Air Products & Chemicals. http://www.airproducts.com/~/media/Files/PDF/industries/en-pua-guide-americas.pdf. 
  5. Baylis, A. B.; Hillman, M. E. D. German Patent 2155113, 1972.
  6. Banks, R. Eric; Murtagh, Vincent; An, Ilhwan; Maleczka, Robert E. (2007). "1-(Chloromethyl)-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane Bis(tetrafluoroborate)". Encyclopedia of Reagents for Organic Synthesis. doi:10.1002/047084289X.rc116.pub2. ISBN 978-0471936237. 
  7. P. Dembech, A. Ricci, G. Seconi, and M. Taddei "Bis(trimethylsilyl) Peroxide" Org. Synth. 1997, volume 74, pp. 84. doi:10.15227/orgsyn.074.0084
  8. Ludovic Martial and Laurent Bischoff "Preparation of DABSO from Karl-Fischer Reagent" Org. Synth. 2013, volume 90, pp. 301. doi:10.15227/orgsyn.090.0301
  9. Ouannes, C.; Wilson, T. (1968). "Quenching of singlet oxygen by tertiary aliphatic amines. Effect of DABCO (1,4-diazabicyclo[2.2.2]octane)". Journal of the American Chemical Society 90 (23): 6527–6528. doi:10.1021/ja01025a059. 
  10. Valnes, K.; Brandtzaeg, P. (1985). "Retardation of immunofluorescence fading during microscopy". Journal of Histochemistry and Cytochemistry 33 (8): 755–761. doi:10.1177/33.8.3926864. PMID 3926864. 
  11. Ho, T. L. (1972). "Dealkylation of Quaternary Ammonium Salts with 1,4-Diazabicyclo[2.2.2]octane". Synthesis 1972 (12): 702. doi:10.1055/s-1972-21977. 
  12. Karsten Eller, Erhard Henkes, Roland Rossbacher, Hartmut Höke "Amines, Aliphatic" in Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH, Weinheim, 2005. doi:10.1002/14356007.a02_001
  13. Mahle, J. (2010). "Role of TEDA as an Activated Carbon Impregnant for the Removal of Cyanogen Chloride from Air Streams: Synergistic Effect with Cu(II)". Journal of Physical Chemistry C 114 (47): 20083–20090. doi:10.1021/jp106730j. https://pubs.acs.org/doi/10.1021/jp106730j. Retrieved 2022-03-17. 

Further reading

  • Cecchi, L.; DeSarlo, F.; Machetti, F. (2006). "1,4-Diazabicyclo[2.2.2]octane (DABCO) as an Efficient Reagent for the Synthesis of Isoxazole Derivatives from Primary Nitro Compounds and Dipolarophiles: The Role of the Base". European Journal of Organic Chemistry 2006 (21): 4852–4860. doi:10.1002/ejoc.200600475. .