Chemistry:Faujasite

From HandWiki
(Redirected from Chemistry:Zeolite Y)
Short description: Group of zeolite minerals
Faujasite
Faujasite subgroup-466643.jpg
General
CategoryZeolite
Formula
(repeating unit)
(Na
2
,Ca,Mg)
3.5
[Al
7
Si
17
O
48
· 32(H
2
O)
[1]
Strunz classification9.GD.30
Crystal systemCubic
Crystal classHexoctahedral (m3m)
H–M Symbol (4/m 3 2/m)
Space groupFd3m
Unit cella = 24.638–24.65 Å, Z = 32
Identification
ColorColorless, white
Crystal habitOctahedral or rarely trisoctahedral crystals up to 4 mm in size
Twinningon {111}, contact and penetration twins
Cleavage{111}, perfect
FractureUneven to conchoidal
TenacityBrittle
Mohs scale hardness4.5-5
|re|er}}Vitreous to adamantine
StreakWhite
DiaphaneityTransparent
Specific gravity1.92–1.93
Optical propertiesIsotropic
Refractive indexn = 1.466–1.480
PleochroismNone
References[2][3][4]

Faujasite (FAU-type zeolite) is a mineral group in the zeolite family of silicate minerals. The group consists of faujasite-Na, faujasite-Mg and faujasite-Ca. They all share the same basic formula (Na
2
,Ca,Mg)
3.5
[Al
7
Si
17
O
48
· 32(H
2
O)
by varying the amounts of sodium, magnesium and calcium.[1] Faujasite occurs as a rare mineral in several locations worldwide.

Faujasite materials are widely synthesized industrially. The relatively low-silica (Si/Al<2) synthetic faujasite is called Zeolite X and the high-silica (Si/Al>2) one is called Zeolite Y. In addition, the aluminum component in zeolite Y can be removed by acid-treatment and/or steam-treatment, and the resulting faujasite is called USY (Ultrastable zeolite Y). USY is used in fluid catalytic cracking process as a catalyst.

Discovery and occurrence

Faujasite was first described in 1842 from an occurrence in the Limberg Quarries, Sasbach, Kaiserstuhl, Baden-Württemberg, Germany . The sodium modifier faujasite-Na was added following the discovery of the magnesium and calcium rich phases in the 1990s. It was named for Barthélemy Faujas de Saint-Fond (1741–1819), French geologist and volcanologist.[3][4]

Faujasite occurs in vesicles within basalt and phonolite lava and tuff as an alteration or authigenic mineral. It occurs with other zeolites, olivine, augite and nepheline.[2]

Structure

The structure of the faujasite framework

thumb|160px|left|Structure of aluminosilicate cage in faujasite. Vertices are occupied by aluminium or silicium atoms, the connecting struts are occupied by oxygen atoms.The faujasite framework has been attributed the code FAU by the International Zeolite Association.[6] It consists of sodalite cages which are connected through hexagonal prisms. The pore, which is formed by a 12-membered ring, has a relatively large diameter of 7.4 Å. The inner cavity has a diameter of 12 Å and is surrounded by 10 sodalite cages. The unit cell is cubic; Pearson symbol cF576, symmetry Fd3m, No. 227,[7] lattice constant 24.7 Å. Of the two types (X and Y) of zeolites coded with FAU, zeolite Y, which is the one with the higher range of silica-to-alumina content, has a void fraction of 48% and a Si/Al ratio of 2.43.[citation needed] It thermally decomposes at 793 °C.[8]

Synthesis

Faujasite is synthesized, as are other zeolites, from alumina sources such as sodium aluminate and silica sources such as sodium silicate. Other aluminosilicates such as kaolin are used as well. The ingredients are dissolved in a basic environment such as sodium hydroxide aqueous solution and crystallized at 70 to 300 °C (usually at 100 °C). After crystallization the faujasite is in its sodium form and must be ion exchanged with ammonium to improve stability. The ammonium ion is removed later by calcination which renders the zeolite in its acid form. Depending on the silica-to-alumina ratio of their framework, synthetic faujasite zeolites are divided into X and Y zeolites. In X zeolites that ratio is between 2 and 3, while in Y zeolites it is 3 or higher. The negative charges of the framework are balanced by the positive charges of cations (usually either sodium from the NaOH solution, or ammonium or H+ after exchanges) in non-framework positions. Such zeolites have ion-exchange, catalytic and adsorptive properties. The stability of the zeolite increases with the silica-to-alumina ratio of the framework (Lowenstein's rule). It is also affected by the type and amount of cations located in non-framework positions. For catalytic cracking, the Y zeolite is often used in a rare earth-hydrogen exchanged form.[9]

By using thermal, hydrothermal or chemical methods, some of the alumina can be removed from the Y zeolite framework, resulting in high-silica Y zeolites. Such zeolites are used in cracking and hydrocracking catalysts. Complete dealumination results in faujasite-silica.[9]

Use

Faujasite is used above all as a catalyst in fluid catalytic cracking to convert high-boiling fractions of petroleum crude to more valuable gasoline, diesel and other products. Zeolite Y has superseded zeolite X in this use because it is both more active and more stable at high temperatures due to the higher Si/Al ratio. It is also used in the hydrocracking units as a platinum/palladium support to increase aromatic content of reformulated refinery products.[10]

Type X zeolite can be used to selectively adsorb CO2 from gas streams[11] and is used in the prepurification of air for industrial air separation.

Due to its widely known structure, behaviour and properties, Faujasite is often used as a standard in catalytic and (ad/de)sorption studies on zeolites, along with MFI, FER and CHA[12][13][14][15]

References

  1. 1.0 1.1 The Faujasite group on Mindat
  2. 2.0 2.1 Faujasite. Handbook of Mineralogy.
  3. 3.0 3.1 Faujasite. Mindat.
  4. 4.0 4.1 Faujasite Mineral Data. Webmineral.
  5. Warr, L.N. (2021). "IMA–CNMNC approved mineral symbols". Mineralogical Magazine 85 (3): 291–320. doi:10.1180/mgm.2021.43. Bibcode2021MinM...85..291W. https://www.cambridge.org/core/journals/mineralogical-magazine/article/imacnmnc-approved-mineral-symbols/62311F45ED37831D78603C6E6B25EE0A. 
  6. "FAU: Framework Type". https://asia.iza-structure.org/IZA-SC/framework.php?STC=FAU. 
  7. Hriljac J.A.; Eddy M.M.; Cheetham A.K.; Donohue J.A.; Ray G.J. (1993). "Powder Neutron Diffraction and 29Si MAS NMR Studies of Siliceous Zeolite-Y". Journal of Solid State Chemistry 106 (1): 66–72. doi:10.1006/jssc.1993.1265. Bibcode1993JSSCh.106...66H. 
  8. The Chemical Engineering Zeolite Page
  9. 9.0 9.1 Scherzer, Julius (1989). "Octane-Enhancing, Zeolitic FCC Catalysts: Scientific and Technical Aspects". Catalysis Reviews 31 (3): 215–354. doi:10.1080/01614948909349934. 
  10. Broach, Robert W.; Jan, Deng‐Yang; Lesch, David A.; Kulprathipanja, Santi; Roland, Eckehart; Kleinschmit, Peter (2012-04-15). "Zeolites". Ullmann's Encyclopedia of Industrial Chemistry. doi:10.1002/14356007.a28_475.pub2. http://dx.doi.org/10.1002/14356007.a28_475.pub2. 
  11. Timothy Golden, "Process for reducing the level of carbon dioxide in a gaseous mixture", A1 USA patent US20020178914 A1, published Dec 5, 2002
  12. Verboekend, D.; Nuttens, N.; Locus, R.; Aelst, J. Van; Verolme, P.; Groen, J. C.; Pérez-Ramírez, J.; Sels, B. F. (2016-06-13). "Synthesis, characterisation, and catalytic evaluation of hierarchical faujasite zeolites: milestones, challenges, and future directions" (in en). Chemical Society Reviews 45 (12): 3331–3352. doi:10.1039/C5CS00520E. ISSN 1460-4744. https://pubs.rsc.org/en/content/articlelanding/2016/cs/c5cs00520e. 
  13. "FER: Framework Type". https://europe.iza-structure.org/IZA-SC/framework.php?STC=FER. 
  14. "CHA: Framework Type". https://europe.iza-structure.org/IZA-SC/framework.php?STC=CHA. 
  15. "MFI: Framework Type". https://europe.iza-structure.org/IZA-SC/framework.php?STC=MFI. 

Literature

  • Subhash Bhatia, Zeolite Catalysis: Principles and Applications, CRC Press, Inc., Boca Raton, Florida, 1990.
  • Ribeiro, F. R., et al., ed., Zeolites: Science and Technology, Martinus Nijhoff Publishers, The Hague, 1984.

External links