Engineering:Chevrolet Series AB National

From HandWiki
Short description: Car model
Chevrolet Series AB National
Overview
ManufacturerChevrolet (General Motors)
Model years1928
Assembly
  • Oakland Assembly, Oakland, California
  • North Tarrytown Assembly, Tarrytown, New York
  • Buffalo Assembly, Buffalo, New York
  • Flint Assembly, Flint, Michigan
  • Norwood Assembly, Norwood, Ohio
  • St. Louis Assembly, St. Louis, Missouri
  • Kansas City Assembly, Kansas City, Missouri
  • Lakewood Assembly, Atlanta, Georgia
  • Janesville Assembly Plant, Janesville, Wisconsin
  • Oshawa Assembly, Oshawa, Ontario Canada
  • Osaka Assembly, Osaka, Japan
  • General Motors South Africa, Port Elizabeth, South Africa
    General Motors New Zealand, Petone, New Zealand
  • GM Argentina, Buenos Aires, Argentina
  • GM Belgium, Antwerp, Belgium
  • Holden Coach Bodies, Birkenhead, South Australia
Body and chassis
Body style
  • 2-door roadster
  • 2-door coupe
  • 4-door sedan
  • 4-door tourer
Layoutfront engine rear wheel drive
PlatformGM A platform
RelatedOakland Six
Pontiac Series 6-28
Powertrain
Engine171 cu in (2.8 L) OHV 4-cylinder
Transmission3-speed manual
Dimensions
Wheelbase107 in (2,718 mm)
Length156 in (3,962.4 mm)
us|uk|Kerb|Curb}} weight2,030–2,435 lb (921–1,104 kg)
Chronology
PredecessorChevrolet Series AA Capitol
SuccessorChevrolet Series AC International

The Chevrolet Series AB National (or Chevrolet National) is an American vehicle manufactured by Chevrolet in 1928 to replace the 1927 Series AA Capitol. Documented production numbers show that 1,193,212 Series ABs were manufactured in a variety of body styles with 69,217 originating from the Oshawa factory alone.[1] Chevrolet instituted serial number recorded on the front seat heel board on either the left or right side, using the listed numbers to designate the point of origin of the vehicle identified.

The Series AB National was joined in the marketplace with another alternative to the Ford Model A called the Plymouth Model Q.[2]

Factory of origin[1]
code city
1 Flint Assembly
2 Tarrytown Assembly
3 St. Louis Assembly
5 Kansas City Assembly
6 Oakland Assembly
8 Lakewood Assembly
9 Norwood Assembly
12 Buffalo Assembly
21 Janesville Assembly

Specification

1928 Chevrolet truck

Looking very similar to the 1927 Series AA Capitol, the wheelbase of the Series AB was increased by four inches to 107 in (2,718 mm). The updated look was one of the first projects from GM's Art & Colour studio.[3] It was the last Chevrolet to use a four-cylinder engine until 1961 and the Chevrolet Chevy II / Nova. Roadsters and touring sedans had the ability to fold the windshield forward on top of the cowl for open air driving.[1]

The Series AB was powered by Chevrolet's old 171 cu in (2,800 cc) four-cylinder engine, but with minor modifications to produce 35 hp (26 kW) at 2,200 rpm. Four-wheel braking was also now provided. Fisher Body provided eight different coachwork choices to include both open and closed body styles. The top choice was listed as the Imperial Landau listed at US$715 ($13,093 in 2024 dollars [4]).[1] In May 1925 the Chevrolet Export Boxing plant at Bloomfield, New Jersey was repurposed from a previous owner where Knock-down kits for Chevrolet, Oakland, Oldsmobile, Buick and Cadillac passenger cars, and both Chevrolet and G. M. C. truck parts are crated and shipped by railroad to the docks at Weehawken, New Jersey for overseas GM assembly factories.[1]

See also

References

Template:Chevrolet cars timeline 1911–1949