Engineering:Schrader valve
The Schrader valve (also called American valve[1]) is a type of pneumatic tire valve used on virtually every motor vehicle in the world today. The Schrader company, for which it was named, was founded in 1844 by August Schrader. The original Schrader valve design was invented in 1891, and patented in the United States in 1893.[2]
The Schrader valve consists of a valve stem into which a valve core is threaded. The valve core is a poppet valve assisted by a spring. A small rubber seal located on the core keeps the fluid from escaping through the threads. Using the appropriate tools, a faulty valve core can be immediately extracted from the valve stem and replaced with a new one.
Uses
The Schrader valve is used on virtually all automobile tires and motorcycle tires and most wider rimmed bicycle tires. In addition to tube and tubeless tires, Schrader valves of varying diameters are used on many refrigeration and air conditioning systems to allow servicing, including recharging with refrigerant; by plumbers conducting leak-down pressure tests on pipe installations; as a bleeding and test port on the fuel rail of some fuel injected engines; on bicycle air shock absorbers to allow adjustment of air pressure according to the rider's weight; and in the buoyancy compensator (BC) inflators of SCUBA systems where the ability to easily disconnect an air hose (even underwater) without the loss of tank air is critical. Schrader valves are also widely used in high-pressure hydraulic systems on aircraft.[3]
Many domestic fire extinguishers use an internal valve identical to a Schrader valve, but with a lever on top to enable quick release of the pressurized content. It is also the same thread specification used on the shutter button of some old Leica, Yashica and also Nikon F and F2 cameras.
Valve
A Schrader valve consists of an externally threaded hollow cylindrical metal tube, typically of nickel plated brass. In the center of the exterior end is a metal pin pointing along the axis of the valve stem; the pin's end is approximately flush with the end of the valve body.
All Schrader valves used on tires have threads and bodies of a single standard size at the exterior end, so caps and tools generally are universal for the valves on all common applications. The core of the valve can be removed or tightened with a tool. Industrial Schrader valves are available in different diameters and valve core variants and are used in refrigeration, propane, and a variety of other uses.[4]
With the advent of miniature electronics, Schrader valve stems with integrated transmitters for tire pressure monitoring systems (TPMS) became available.
Cap
A valve cap on a Schrader valve prevents the entry of dirt or other contaminants that may interfere with the sealing surfaces and cause a leak.
Metal, and some hard plastic valve caps, have a rubber washer or O-ring inside, both to prevent the cap from loosening and falling off due to vibration, and to serve as a mechanical seal to prevent air from leaking from a faulty valve core. Simple caps without seal do not reliably prevent leaks.
In refrigeration and air conditioning applications, the valve cap is considered to be the primary seal, with the Schrader valve only being used for service access.[5][6]
Schrader versus other valve types
Schrader valves are almost universal on car, truck, and motorcycle tires. Bicycle tubes have Schrader or Presta valves, with most higher end bikes having Presta valves. Both the Schrader and the Presta types are good at sealing high pressures. Their chief differences are that Schrader valves are larger and have springs that close the valve except when the pin is depressed. Schrader valves are used in a wide variety of compressed gas and pressurized liquid applications such as small torch and grill cylinders, and air shocks. Schrader valves are also viewed as more complex (requiring two seals over one). They weigh 4–5g more than Presta valves.[7]
Presta valve stems are 6 mm in diameter, whereas Schrader valve stems for bicycle tires are 8 mm, allowing Prestas to be used on narrower, high-performance rims as on road racing bicycles. Another disadvantage of the Schrader is that debris may be introduced into its spring-loaded pin, impairing inflation, whereas the Presta valve relies only on air pressure and a small knurled nut to keep it shut.
Inflating a bicycle tire equipped with a Presta valve at an automobile filling station requires an adaptor, while a Schrader-valved tube does not. Inflating at home or on the road requires a pump that supports Presta valves; some support both Schrader and Presta valves.
Because of their popularity with bicycles, Presta valves are also available in a wider variety of stem lengths for aero bicycle rims. A removable core Presta valve has become common in many applications, specifically tubeless tires where the ability to introduce sealant into the tire through the stem is considered useful.
Dunlop valves (also called "British" or "Woods" valves) are occasionally used on bicycles in some countries including India, China, Japan, Korea, Ireland and the Netherlands, but are now rarely used elsewhere. Dunlop valves are compatible with Presta inflators.
Dimensions
- External 8V1 thread: 0.305 in (7.747 mm) x 32 TPI[4] (1⁄32 in or 0.7938 mm pitch; tap size 8v1-32)
- Internal 5V1 thread: 0.209 in (5.309 mm) x 36 TPI (1⁄36 in or 0.7056 mm pitch; tap size 5v1-36)
See also
References
- ↑ Tony Atkins and Marcel Escudier (25 April 2013). A Dictionary of Mechanical Engineering. Oxford University Press. pp. 312. ISBN 9780199587438. https://books.google.com/books?id=0TjtKmSIL48C&q=%22Schrader%22++%22american+valve%22&pg=PA312. Retrieved 23 October 2013.
- ↑ George H.F. Schrader, "Valve," U.S. Patent 0,495,064 (filed: January 9, 1893 ; issued: April 11, 1893).
- ↑ Carpenter, Carol (September 2010). "Valve Cores in Aviation Applications". Light Aviation/Aviators Hotline. https://www.aviatorshotline.com/content/valve-cores-aviation-applications. "landing gear strut ... [Schrader] valve has an operating pressure from 0 to 2000 PSI."
- ↑ 4.0 4.1 "Schrader Valves". https://www.schraderinternational.com/Products/Valves?sc_lang=en-US-NA.
- ↑ Schaeber, Steve (14 July 2014). "Mobile A/C service tip: mind the service port caps". https://macsworldwide.wordpress.com/2014/07/14/mobile-ac-service-tip-mind-the-service-port-caps/.
- ↑ "Service Port Caps—Small but Powerful". https://fjcinc.com/service-port-caps-small-but-powerful/.
- ↑ "Inner Tube Valve Types". Tube King. https://www.tubeking.co.uk/blogs/news/inner-tube-valve-types.
External links
fr:Valve Schrader
 |  |
