Medicine:Basic reproduction number

From HandWiki
Short description: Metric in epidemiology

In epidemiology, the basic reproduction number, or basic reproductive number (sometimes called basic reproduction ratio or basic reproductive rate), denoted [math]\displaystyle{ R_0 }[/math] (pronounced R nought or R zero),[1] of an infection is the expected number of cases directly generated by one case in a population where all individuals are susceptible to infection.[2] The definition assumes that no other individuals are infected or immunized (naturally or through vaccination). Some definitions, such as that of the Australian Department of Health, add the absence of "any deliberate intervention in disease transmission".[3] The basic reproduction number is not necessarily the same as the effective reproduction number [math]\displaystyle{ R }[/math] (usually written [math]\displaystyle{ R_t }[/math] [t for time], sometimes [math]\displaystyle{ R_e }[/math]),[4] which is the number of cases generated in the current state of a population, which does not have to be the uninfected state. [math]\displaystyle{ R_0 }[/math] is a dimensionless number (persons infected per person infecting) and not a time rate, which would have units of time−1,[5] or units of time like doubling time.[6]

[math]\displaystyle{ R_0 }[/math] is not a biological constant for a pathogen as it is also affected by other factors such as environmental conditions and the behaviour of the infected population. [math]\displaystyle{ R_0 }[/math] values are usually estimated from mathematical models, and the estimated values are dependent on the model used and values of other parameters. Thus values given in the literature only make sense in the given context and it is recommended not to use obsolete values or compare values based on different models.[7] [math]\displaystyle{ R_0 }[/math] does not by itself give an estimate of how fast an infection spreads in the population.

The most important uses of [math]\displaystyle{ R_0 }[/math] are determining if an emerging infectious disease can spread in a population and determining what proportion of the population should be immunized through vaccination to eradicate a disease. In commonly used infection models, when [math]\displaystyle{ R_0 \gt 1 }[/math] the infection will be able to start spreading in a population, but not if [math]\displaystyle{ R_0 \lt 1 }[/math]. Generally, the larger the value of [math]\displaystyle{ R_0 }[/math], the harder it is to control the epidemic. For simple models, the proportion of the population that needs to be effectively immunized (meaning not susceptible to infection) to prevent sustained spread of the infection has to be larger than [math]\displaystyle{ 1 - 1 / R_0 }[/math].[8] This is the so-called Herd immunity threshold or herd immunity level. Here, herd immunity means that the disease cannot spread in the population because each infected person, on average, can only transmit the infection to less than one other contact.[9] Conversely, the proportion of the population that remains susceptible to infection in the endemic equilibrium is [math]\displaystyle{ 1 / R_0 }[/math]. However, this threshold is based on simple models that assume a fully mixed population with no structured relations between the individuals. For example, if there is some correlation between people's immunization (e.g., vaccination) status, then the formula [math]\displaystyle{ 1 - 1 / R_0 }[/math] may underestimate the herd immunity threshold.[9]

The basic reproduction number is affected by several factors, including the duration of infectivity of affected people, the infectiousness of the microorganism, and the number of susceptible people in the population that the infected people contact.[citation needed]

History

The roots of the basic reproduction concept can be traced through the work of Ronald Ross, Alfred Lotka and others,[10] but its first modern application in epidemiology was by George Macdonald in 1952,[11] who constructed population models of the spread of malaria. In his work he called the quantity basic reproduction rate and denoted it by [math]\displaystyle{ Z_0 }[/math]. "Rate" in this context means per person, which makes [math]\displaystyle{ Z_0 }[/math] dimensionless as required. Because this can be misleading to anyone who understands "rate" only in the sense per unit of time, "number" or "ratio" is now preferred.[citation needed]

Definitions in specific cases

Contact rate and infectious period

[math]\displaystyle{ R_0 }[/math] is the average number of people infected from one other person. For example, Ebola has an [math]\displaystyle{ R_0 }[/math] of two, so on average, a person who has Ebola will pass it on to two other people.

Suppose that infectious individuals make an average of [math]\displaystyle{ \beta }[/math] infection-producing contacts per unit time, with a mean infectious period of [math]\displaystyle{ \tau }[/math]. Then the basic reproduction number is:[citation needed][math]\displaystyle{ R_0 = \beta\,\tau }[/math]This simple formula suggests different ways of reducing [math]\displaystyle{ R_0 }[/math] and ultimately infection propagation. It is possible to decrease the number of infection-producing contacts per unit time [math]\displaystyle{ \beta }[/math] by reducing the number of contacts per unit time (for example staying at home if the infection requires contact with others to propagate) or the proportion of contacts that produces infection (for example wearing some sort of protective equipment). Hence, it can also be written as[12]

[math]\displaystyle{ R_0 = \overline{c}\, T\, \tau, }[/math]

where [math]\displaystyle{ \overline{c} }[/math] is the rate of contact between susceptible and infected individuals and [math]\displaystyle{ T }[/math] is the transmissibility, i.e, the probability of infection given a contact. It is also possible to decrease the infectious period [math]\displaystyle{ \tau }[/math] by finding and then isolating, treating or eliminating (as is often the case with animals) infectious individuals as soon as possible.[citation needed]

With varying latent periods

Latent period is the transition time between contagion event and disease manifestation. In cases of diseases with varying latent periods, the basic reproduction number can be calculated as the sum of the reproduction numbers for each transition time into the disease. An example of this is tuberculosis (TB). Blower and coauthors calculated from a simple model of TB the following reproduction number:[13][math]\displaystyle{ R_0 = R_0^{\text{FAST}} + R_0^{\text{SLOW}} }[/math]In their model, it is assumed that the infected individuals can develop active TB by either direct progression (the disease develops immediately after infection) considered above as FAST tuberculosis or endogenous reactivation (the disease develops years after the infection) considered above as SLOW tuberculosis.[14]

Heterogeneous populations

In populations that are not homogeneous, the definition of [math]\displaystyle{ R_0 }[/math] is more subtle. The definition must account for the fact that a typical infected individual may not be an average individual. As an extreme example, consider a population in which a small portion of the individuals mix fully with one another while the remaining individuals are all isolated. A disease may be able to spread in the fully mixed portion even though a randomly selected individual would lead to fewer than one secondary case. This is because the typical infected individual is in the fully mixed portion and thus is able to successfully cause infections. In general, if the individuals infected early in an epidemic are on average either more likely or less likely to transmit the infection than individuals infected late in the epidemic, then the computation of [math]\displaystyle{ R_0 }[/math] must account for this difference. An appropriate definition for [math]\displaystyle{ R_0 }[/math] in this case is "the expected number of secondary cases produced, in a completely susceptible population, produced by a typical infected individual".[15]

The basic reproduction number can be computed as a ratio of known rates over time: if an infectious individual contacts [math]\displaystyle{ \beta }[/math] other people per unit time, if all of those people are assumed to contract the disease, and if the disease has a mean infectious period of [math]\displaystyle{ \dfrac{1}{\gamma} }[/math], then the basic reproduction number is just [math]\displaystyle{ R_0 = \dfrac{\beta}{\gamma} }[/math]. Some diseases have multiple possible latency periods, in which case the reproduction number for the disease overall is the sum of the reproduction number for each transition time into the disease.

Epidemic Models on Networks

In reality, diseases spread over networks of contact between people. Such a network can be represented mathematically with a graph and is called the contact network.[16] Every node in a contact network is a representation of an individual and each link (edge) between a pair of nodes represents the contact between them. Links in the contact networks may be used to transmit the disease between the individuals and each disease has its own dynamics on top of its contact network. For example, individuals in a population can be assigned to compartments with labels – for example, S, I, or R, (Susceptible, Infectious, or Recovered) and they progress between compartments. The order of the labels usually shows the flow patterns between the compartments; for instance, SIR means each individual is originally susceptible then changes to infectious and finally gets recovered and remained recovered (immune) forever. On the other hand, public health may apply some interventions such as vaccination or contact tracing to reduce the spread of an epidemic disease. The combination of disease dynamics under the influence of interventions, if any, on a contact network may be modeled with another network, known as a transmission network. In a transmission network, all the links are responsible for transmitting the disease. If such a network is a locally tree-like network, meaning that any local neighborhood in such a network takes the form of a tree, then the basic reproduction can be written in terms of the average excess degree of the transmission network such that:

[math]\displaystyle{ R_0 = \frac{{\langle k^2 \rangle}}{{\langle k \rangle}} - 1, }[/math]

where [math]\displaystyle{ {\langle k \rangle} }[/math] is the mean-degree (average degree) of the network and [math]\displaystyle{ {\langle k^2 \rangle} }[/math] is the second moment of the transmission network degree distribution. It is, however, not always straightforward to find the transmission network out of the contact network and the disease dynamics.[17] For example, if a contact network can be approximated with an Erdős–Rényi graph with a Poissonian degree distribution, and the disease spreading parameters are as defined in the example above, such that [math]\displaystyle{ \beta }[/math] is the transmission rate per person and the disease has a mean infectious period of [math]\displaystyle{ \dfrac{1}{\gamma} }[/math], then the basic reproduction number is [math]\displaystyle{ R_0 = \dfrac{\beta}{\gamma}{\langle k \rangle} }[/math][18][19] since [math]\displaystyle{ {\langle k^2 \rangle} -{\langle k \rangle}^2 = {\langle k \rangle} }[/math] for a Poisson distribution.

Compartmental models in epidemiology

Next-generation method

One way to calculate [math]\displaystyle{ R_0 }[/math] is to average the expected number of new infections over all possible infected types. The next-generation method is a general method of deriving [math]\displaystyle{ R_0 }[/math] when more than one class of infectives is involved. This method, originally introduced by Diekmann et al. (1990),[20] can be used for models with underlying age structure or spatial structure, among other possibilities.[21] In this picture, the spectral radius of the next-generation matrix [math]\displaystyle{ G }[/math] gives the basic reproduction number, [math]\displaystyle{ R_0 = \rho(G). }[/math][22]

Consider a sexually transmitted disease. In a naive population where almost everyone is susceptible, but the infection seed, if the expected number of gender 1 is [math]\displaystyle{ f }[/math] and the expected number of infected gender 2 is [math]\displaystyle{ m }[/math], we can know how many would be infected in the next-generation. Such that the next-generation matrix [math]\displaystyle{ G }[/math] can be written as:[12][math]\displaystyle{ G = \begin{pmatrix} 0 & f \\ m & 0 \end{pmatrix}, }[/math]where each element [math]\displaystyle{ g_{ij} }[/math] is the expected number of secondary infections of gender [math]\displaystyle{ i }[/math] caused by a single infected individual of gender [math]\displaystyle{ j }[/math], assuming that the population of gender [math]\displaystyle{ i }[/math] is entirely susceptible. Diagonal elements are zero because people of the same gender cannot transmit the disease to each other but, for example, each [math]\displaystyle{ f }[/math] can transmit the disease to [math]\displaystyle{ m }[/math], on average. Meaning that each element [math]\displaystyle{ g_{ij} }[/math] is a reproduction number, but one where who infects whom is accounted for. If generation [math]\displaystyle{ a }[/math] is represented with [math]\displaystyle{ \phi_a }[/math] then the next generation [math]\displaystyle{ \phi_{a+1} }[/math] would be [math]\displaystyle{ G\phi_a }[/math].

The spectral radius of the next-generation matrix is the basic reproduction number, [math]\displaystyle{ R_0 = \rho(G) = \sqrt{mf} }[/math], that is here, the geometric mean of the expected number of each gender in the next-generation. Note that multiplication factors [math]\displaystyle{ f }[/math] and [math]\displaystyle{ m }[/math] alternate because, the infectious person has to ‘pass through’ a second gender before it can enter a new host of the first gender. In other words, it takes two generations to get back to the same type, and every two generations numbers are multiplied by [math]\displaystyle{ m }[/math]×[math]\displaystyle{ f }[/math]. The average per generation multiplication factor is therefore [math]\displaystyle{ \sqrt{mf} }[/math]. Note that [math]\displaystyle{ G }[/math] is a non-negative matrix so it has single, unique, positive, real eigenvalue which is strictly greater than all the others.

Next-generation matrix for compartmental models

In mathematical modelling of infectious disease, the dynamics of spreading is usually described through a set of non-linear ordinary differential equations (ODE). So there is always [math]\displaystyle{ n }[/math] coupled equations of form [math]\displaystyle{ \dot{C_i}={\operatorname{d}\!C_i\over\operatorname{d}\!t} = f(C_1, C_2, ..., C_n) }[/math] which shows how the number of people in compartment [math]\displaystyle{ C_i }[/math] changes over time. For example, in a SIR model, [math]\displaystyle{ C_1 = S }[/math], [math]\displaystyle{ C_2 = I }[/math], and [math]\displaystyle{ C_3 = R }[/math]. Compartmental models have a disease-free equilibrium (DFE) meaning that it is possible to find an equilibrium while setting the number of infected people to zero, [math]\displaystyle{ I=0 }[/math]. In other words, as a rule, there is an infection-free steady state. This solution, also usually ensures that the disease-free equilibrium is also an equilibrium of the system. There is another fixed point known as an Endemic Equilibrium (EE) where the disease is not totally eradicated and remains in the population. Mathematically, [math]\displaystyle{ R_0 }[/math] is a threshold for stability of a disease-free equilibrium such that:

[math]\displaystyle{ R_0 \le 1 \Rightarrow \lim_{t \to \infty} (C_1(t),C_2(t),\cdots, C_n(t)) = \textrm{DFE} }[/math]
[math]\displaystyle{ R_0 \gt 1 , I(0)\gt 0 \Rightarrow \lim_{t \to \infty} (C_1(t),C_2(t),\cdots, C_n(t)) = \textrm{EE}. }[/math]

To calculate [math]\displaystyle{ R_0 }[/math], the first step is to linearise around the disease-free equilibrium (DFE), but for the infected subsystem of non-linear ODEs which describe the production of new infections and changes in state among infected individuals. Epidemiologically, the linearisation reflects that [math]\displaystyle{ R_0 }[/math] characterizes the potential for initial spread of an infectious person in a naive population, assuming the change in the susceptible population is negligible during the initial spread.[23] A linear system of ODEs can always be described by a matrix. So, the next step is to construct a linear positive operator that provides the next generation of infected people when applied to the present generation. Note that this operator (matrix) is responsible for the number of infected people, not all the compartments. Iteration of this operator describes the initial progression of infection within the heterogeneous population. So comparing the spectral radius of this operator to unity determines whether the generations of infected people grow or not. [math]\displaystyle{ R_0 }[/math] can be written as a product of the infection rate near the disease-free equilibrium and average duration of infectiousness. It is used to find the peak and final size of an epidemic.

The SEIR model with vital dynamics and constant population

As described in the example above, so many epidemic processes can be described with a SIR‌ model. However, for many important infections, such as COVID-19, there is a significant latency period during which individuals have been infected but are not yet infectious themselves. During this period the individual is in compartment E (for exposed). Here, the formation of the next-generation matrix from the SEIR‌ model involves determining two compartments, infected and non-infected, since they are the populations that spread the infection. So we only need to model the exposed, E, and infected, I, compartments. Consider a population characterized by a death rate [math]\displaystyle{ \mu }[/math] and birth rate [math]\displaystyle{ \lambda }[/math] where a communicable disease is spreading. As in the previous example, we can use the transition rates between the compartments per capita such that [math]\displaystyle{ \beta }[/math] be the infection rate, [math]\displaystyle{ \gamma }[/math] be the recovery rate, and [math]\displaystyle{ \kappa }[/math] be the rate at which a latent individual becomes infectious. Then, we can define the model dynamics using the following equations:[21][24]

[math]\displaystyle{ \begin{cases} \dot{S} = \lambda - \mu S - \beta SI, \\\\ \dot{E} = \beta SI - (\mu+\kappa)E, \\\\ \dot{I} = \kappa E - (\mu+\gamma)I, \\\\ \dot{R} = \gamma I - \mu R. \end{cases} }[/math]Here we have 4 compartments and we can define vector [math]\displaystyle{ \mathrm{x} = (S, E, I, R) }[/math] where [math]\displaystyle{ \mathrm{x}_i }[/math] denotes the number or proportion of individuals in the [math]\displaystyle{ i }[/math]-th compartment. Let [math]\displaystyle{ F_i(\mathrm{x}) }[/math] be the rate of appearance of new infections in compartment [math]\displaystyle{ i }[/math] such that it includes only infections that are newly arising, but does not include terms which describe the transfer of infectious individuals from one infected compartment to another. Then if [math]\displaystyle{ V_i^+ }[/math] is the rate of transfer of individuals into compartment [math]\displaystyle{ i }[/math] by all other means and [math]\displaystyle{ V_i^- }[/math] is the rate of transfer of individuals out of the [math]\displaystyle{ i }[/math]-th compartment, then the difference [math]\displaystyle{ F_i(\mathrm{x}) - V_i(\mathrm{x}) }[/math] gives the rate of change of such that [math]\displaystyle{ V_i(\mathrm{x}) = V_i^-(\mathrm{x}) - V_i^+ (\mathrm{x}) }[/math].

We can now make matrices of partial derivatives of [math]\displaystyle{ F }[/math] and [math]\displaystyle{ V }[/math] such that

[math]\displaystyle{ F_{ij} = {\partial\! \ F_i(\mathrm{x}^*)\over\partial \! \ \mathrm{x}_j} }[/math] and [math]\displaystyle{ V_{ij} = {\partial\! \ V_i(\mathrm{x}^*)\over\partial \! \ \mathrm{x}_j} }[/math] , where [math]\displaystyle{ \mathrm{x}^* = (S^*, E^*, I^*, R^*) = (\lambda/\mu, 0, 0, 0) }[/math] is the disease-free equilibrium.

We now can form the next-generation matrix (operator) [math]\displaystyle{ G = FV^{-1} }[/math].[15][22] Basically, [math]\displaystyle{ F }[/math] is a non-negative matrix which represents the infection rates near the equilibrium, and [math]\displaystyle{ V }[/math] is an M-matrix for linear transition terms making [math]\displaystyle{ V^{-1} }[/math] a matrix which represents the average duration of infectiousness. Therefore, [math]\displaystyle{ G_{ij} }[/math] gives the rate at which infected individuals in [math]\displaystyle{ \mathrm{x}_j }[/math] produce new infections in [math]\displaystyle{ \mathrm{x}_i }[/math], times the average length of time an individual spends in a single visit to compartment [math]\displaystyle{ j. }[/math]

Finally, for this SEIR process we can have:

[math]\displaystyle{ F = \begin{pmatrix} 0 & \beta S^* \\ 0 & 0 \end{pmatrix} }[/math] and [math]\displaystyle{ V = \begin{pmatrix} \mu + \kappa & 0 \\ -\kappa & \gamma + \mu \end{pmatrix} }[/math] and so [math]\displaystyle{ R_0 = \rho( FV^{-1}) = \frac{\kappa\beta S^*}{(\mu+\kappa)(\mu+\gamma)}. }[/math]

Estimation methods

The basic reproduction number can be estimated through examining detailed transmission chains or through genomic sequencing. However, it is most frequently calculated using epidemiological models.[25] During an epidemic, typically the number of diagnosed infections [math]\displaystyle{ N(t) }[/math] over time [math]\displaystyle{ t }[/math] is known. In the early stages of an epidemic, growth is exponential, with a logarithmic growth rate [math]\displaystyle{ K := \frac{d\ln(N)}{dt}. }[/math] For exponential growth, [math]\displaystyle{ N }[/math] can be interpreted as the cumulative number of diagnoses (including individuals who have recovered) or the present number of infection cases; the logarithmic growth rate is the same for either definition. In order to estimate [math]\displaystyle{ R_0 }[/math], assumptions are necessary about the time delay between infection and diagnosis and the time between infection and starting to be infectious.

In exponential growth, [math]\displaystyle{ K }[/math] is related to the doubling time [math]\displaystyle{ T_d }[/math] as[math]\displaystyle{ K=\frac{\ln(2)}{T_d}. }[/math]

Simple model

If an individual, after getting infected, infects exactly [math]\displaystyle{ R_0 }[/math] new individuals only after exactly a time [math]\displaystyle{ \tau }[/math] (the serial interval) has passed, then the number of infectious individuals over time grows as[math]\displaystyle{ n_E(t) = n_E(0)\, R_0^{t/\tau} = n_E(0)\,e^{Kt} }[/math]or[math]\displaystyle{ \ln(n_E(t)) = \ln(n_E(0))+\ln(R_0)t/\tau. }[/math]The underlying matching differential equation is[math]\displaystyle{ \frac{dn_E(t)}{dt} =n_E(t)\frac {\ln(R_0)}{\tau}. }[/math]or[math]\displaystyle{ \frac{d\ln(n_E(t))}{dt} =\frac {\ln(R_0)}{\tau}. }[/math]In this case, [math]\displaystyle{ R_0 = e^{K \tau} }[/math] or [math]\displaystyle{ K = \frac{\ln R_0}{\tau} }[/math].

For example, with [math]\displaystyle{ \tau=5~\mathrm{d} }[/math] and [math]\displaystyle{ K=0.183~\mathrm{d}^{-1} }[/math], we would find [math]\displaystyle{ R_0=2.5 }[/math].

If [math]\displaystyle{ R_0 }[/math] is time dependent [math]\displaystyle{ \ln(n_E(t)) = \ln(n_E(0))+\frac{1}{\tau}\int\limits_{0}^{t}\ln(R_0(t))dt }[/math] showing that it may be important to keep [math]\displaystyle{ \ln(R_0) }[/math] below 0, time-averaged, to avoid exponential growth.

Latent infectious period, isolation after diagnosis

In this model, an individual infection has the following stages:

  1. Exposed: an individual is infected, but has no symptoms and does not yet infect others. The average duration of the exposed state is [math]\displaystyle{ \tau_E }[/math].
  2. Latent infectious: an individual is infected, has no symptoms, but does infect others. The average duration of the latent infectious state is [math]\displaystyle{ \tau_I }[/math]. The individual infects [math]\displaystyle{ R_0 }[/math] other individuals during this period.
  3. Isolation after diagnosis: measures are taken to prevent further infections, for example by isolating the infected person.

This is a SEIR model and [math]\displaystyle{ R_0 }[/math] may be written in the following form[26] [math]\displaystyle{ R_0 = 1 + K(\tau_E+\tau_I) + K^2\tau_E\tau_I. }[/math] This estimation method has been applied to COVID-19 and SARS. It follows from the differential equation for the number of exposed individuals [math]\displaystyle{ n_E }[/math] and the number of latent infectious individuals [math]\displaystyle{ n_I }[/math],[math]\displaystyle{ \frac{d}{dt} \begin{pmatrix} n_E \\ n_I \end{pmatrix} = \begin{pmatrix} -1/\tau_E & R_0/\tau_I \\ 1/\tau_E & -1/\tau_I \end{pmatrix} \begin{pmatrix} n_E \\ n_I \end{pmatrix}. }[/math]The largest eigenvalue of the matrix is the logarithmic growth rate [math]\displaystyle{ K }[/math], which can be solved for [math]\displaystyle{ R_0 }[/math].

In the special case [math]\displaystyle{ \tau_I = 0 }[/math], this model results in [math]\displaystyle{ R_0=1+K\tau_E }[/math], which is different from the simple model above ([math]\displaystyle{ R_0=\exp(K\tau_E) }[/math]). For example, with the same values [math]\displaystyle{ \tau=5~\mathrm{d} }[/math] and [math]\displaystyle{ K=0.183~\mathrm{d}^{-1} }[/math], we would find [math]\displaystyle{ R_0=1.9 }[/math], rather than the true value of [math]\displaystyle{ 2.5 }[/math]. The difference is due to a subtle difference in the underlying growth model; the matrix equation above assumes that newly infected patients are currently already contributing to infections, while in fact infections only occur due to the number infected at [math]\displaystyle{ \tau_E }[/math] ago. A more correct treatment would require the use of delay differential equations.[27]

Effective reproduction number

File:R number – the rate of infection; a government video.webm In reality, varying proportions of the population are immune to any given disease at any given time. To account for this, the effective reproduction number [math]\displaystyle{ R_e }[/math] or [math]\displaystyle{ R }[/math] is used. [math]\displaystyle{ R_t }[/math] is the average number of new infections caused by a single infected individual at time t in the partially susceptible population. It can be found by multiplying [math]\displaystyle{ R_0 }[/math] by the fraction S of the population that is susceptible. When the fraction of the population that is immune increases (i. e. the susceptible population S decreases) so much that [math]\displaystyle{ R_e }[/math] drops below 1 in a basic SIR simulation, "herd immunity" has been achieved and the number of cases occurring in the population will gradually decrease to zero.[28][29][30]

Limitations of R0

Use of [math]\displaystyle{ R_0 }[/math] in the popular press has led to misunderstandings and distortions of its meaning. [math]\displaystyle{ R_0 }[/math] can be calculated from many different mathematical models. Each of these can give a different estimate of [math]\displaystyle{ R_0 }[/math], which needs to be interpreted in the context of that model. Therefore, the contagiousness of different infectious agents cannot be compared without recalculating [math]\displaystyle{ R_0 }[/math] with invariant assumptions. [math]\displaystyle{ R_0 }[/math] values for past outbreaks might not be valid for current outbreaks of the same disease. Generally speaking, [math]\displaystyle{ R_0 }[/math] can be used as a threshold, even if calculated with different methods: if [math]\displaystyle{ R_0 \lt 1 }[/math], the outbreak will die out, and if [math]\displaystyle{ R_0 \gt 1 }[/math], the outbreak will expand. In some cases, for some models, values of [math]\displaystyle{ R_0 \lt 1 }[/math] can still lead to self-perpetuating outbreaks. This is particularly problematic if there are intermediate vectors between hosts (as is the case for zoonoses), such as malaria.[31] Therefore, comparisons between values from the "Values of [math]\displaystyle{ R_0 }[/math] of well-known infectious diseases" table should be conducted with caution.

Although [math]\displaystyle{ R_0 }[/math] cannot be modified through vaccination or other changes in population susceptibility, it can vary based on a number of biological, sociobehavioral, and environmental factors.[7] It can also be modified by physical distancing and other public policy or social interventions,[32][7] although some historical definitions exclude any deliberate intervention in reducing disease transmission, including nonpharmacological interventions.[3] And indeed, whether nonpharmacological interventions are included in [math]\displaystyle{ R_0 }[/math] often depends on the paper, disease, and what if any intervention is being studied.[7] This creates some confusion, because [math]\displaystyle{ R_0 }[/math] is not a constant; whereas most mathematical parameters with "nought" subscripts are constants.

[math]\displaystyle{ R }[/math] depends on many factors, many of which need to be estimated. Each of these factors adds to uncertainty in estimates of [math]\displaystyle{ R }[/math]. Many of these factors are not important for informing public policy. Therefore, public policy may be better served by metrics similar to [math]\displaystyle{ R }[/math], but which are more straightforward to estimate, such as doubling time or half-life ([math]\displaystyle{ t_{1/2} }[/math]).[33][34]

Methods used to calculate [math]\displaystyle{ R_0 }[/math] include the survival function, rearranging the largest eigenvalue of the Jacobian matrix, the next-generation method,[35] calculations from the intrinsic growth rate,[36] existence of the endemic equilibrium, the number of susceptibles at the endemic equilibrium, the average age of infection[37] and the final size equation.[38] Few of these methods agree with one another, even when starting with the same system of differential equations.[31] Even fewer actually calculate the average number of secondary infections. Since [math]\displaystyle{ R_0 }[/math] is rarely observed in the field and is usually calculated via a mathematical model, this severely limits its usefulness.[39]

Sample values for various infectious diseases

Despite the difficulties in estimating [math]\displaystyle{ R_0 }[/math]mentioned in the previous section, estimates have been made for a number of genera, and are shown in this table. Each genus may be composed of many species, strains, or variants. Estimations of [math]\displaystyle{ R_0 }[/math] for species, strains, and variants are typically less accurate than for genera, and so are provided in separate tables below for diseases of particular interest (influenza and COVID-19).<section begin="r0hittable" />

Values of R0 and herd immunity thresholds (HITs) of infectious diseases prior to intervention
Disease Transmission R0 HIT[lower-alpha 1]
Measles Aerosol 12–18[40][7] 92–94%
Chickenpox (varicella) Aerosol 10–12[41] 90–92%
Mumps Respiratory droplets 10–12[42] 90–92%
Rubella Respiratory droplets 6–7[lower-alpha 2] 83–86%
Polio Fecal–oral route 5–7[lower-alpha 2] 80–86%
Pertussis Respiratory droplets 5.5[47] 82%
Smallpox Respiratory droplets 3.5–6.0[48] 71–83%
HIV/AIDS Body fluids 2–5[49] 50–80%
COVID-19 (ancestral strain) Respiratory droplets and aerosol[50] Template:Estimate[51] Template:Estimate
SARS Respiratory droplets 2–4[52] 50–75%
Diphtheria Saliva Template:Estimate[53] Template:Estimate
Common cold (e.g., rhinovirus) Respiratory droplets 2–3[54] 50–67%
Mpox Physical contact, body fluids, respiratory droplets Template:Estimate[55] Template:Estimate
2022–2023 mpox outbreak Physical contact, body fluids, respiratory droplets, Sexual (MSM) Template:Estimate[56] 21.94%
Ebola (2014 outbreak) Body fluids Template:Estimate[57] Template:Estimate
Influenza (seasonal strains) Respiratory droplets Template:Estimate[58] Template:Estimate
Andes hantavirus Respiratory droplets and body fluids Template:Estimate[59] Template:Estimate[lower-alpha 3]
Nipah virus Body fluids 0.5[60] 0%[lower-alpha 3]
MERS Respiratory droplets Template:Estimate[61] 0%[lower-alpha 3]

<section end="r0hittable" />Estimates for strains of influenza.<section begin="Flur0hittable" />

Values of R0 and herd immunity thresholds (HITs) for specific influenza strains
Disease Transmission R0 HIT[lower-alpha 1]
Influenza (1918 pandemic strain) Respiratory droplets 2[62] 50%
Influenza (2009 pandemic strain) Respiratory droplets Template:Estimate[2] Template:Estimate
Influenza (seasonal strains) Respiratory droplets Template:Estimate[58] Template:Estimate

<section end="Flur0hittable" />Estimates for variants of SARS-CoV-2.<section begin="COVIDr0hittable" />

Values of R0 and herd immunity thresholds (HITs) for variants of SARS-CoV-2
Disease Transmission R0 HIT[lower-alpha 1]
COVID-19 (Omicron variant) Respiratory droplets and aerosol 9.5[63] 89%
COVID-19 (Delta variant) Respiratory droplets and aerosol 5.1[64] 80%
COVID-19 (Alpha variant) Respiratory droplets and aerosol 4–5[65] 75–80%
COVID-19 (ancestral strain) Respiratory droplets and aerosol[50] Template:Estimate[51] Template:Estimate

<section end="COVIDr0hittable" />

In popular culture

In the 2011 film Contagion, a fictional medical disaster thriller, a blogger's calculations for [math]\displaystyle{ R_0 }[/math] are presented to reflect the progression of a fatal viral infection from isolated cases to a pandemic.[32]

See also


Notes

  1. ↑ 1.0 1.1 1.2 Calculated using p = 1 − 1/R0.
  2. ↑ 2.0 2.1 From a module of a training course[43] with data modified from other sources.[44][45][46]
  3. ↑ 3.0 3.1 3.2 When R0 < 1.0, the disease naturally disappears.


  • Compartmental models in epidemiology describe disease dynamics over time in a population of susceptible (S), infectious (I), and recovered (R) people using the SIR model. Note that in the SIR model, [math]\displaystyle{ R(0) }[/math] and [math]\displaystyle{ R_0 }[/math] are different quantities – the former describes the number of recovered at t = 0 whereas the latter describes the ratio between the frequency of contacts to the frequency of recovery.
  • (in en) Handbook of Infectious Disease Data Analysis. CRC Press. 2019-11-07. pp. 347. ISBN 978-1-351-83932-7. https://books.google.com/books?id=cXC9DwAAQBAJ&pg=PA347.  According to Guangdong Provincial Center for Disease Control and Prevention, "The effective reproductive number (R or Re is more commonly used to describe transmissibility, which is defined as the average number of secondary cases generated by per [sic] infectious case." For example, by one preliminary estimate during the ongoing pandemic, the effective reproductive number for SARS-CoV-2 was found to be 2.9, whereas for SARS it was 1.77.


References

  1. ↑ Vaccinology : an essential guide. Chichester, West Sussex: Wiley Blackwell. 2015. pp. 310. ISBN 978-1-118-63652-7. OCLC 881386962. 
  2. ↑ 2.0 2.1 "Pandemic potential of a strain of influenza A (H1N1): early findings". Science 324 (5934): 1557–61. June 2009. doi:10.1126/science.1176062. PMID 19433588. Bibcode: 2009Sci...324.1557F. 
  3. ↑ 3.0 3.1 "The reproduction number". Using Mathematical Models to Assess Responses to an Outbreak of an Emerged Viral Respiratory Disease. National Centre for Epidemiology and Population Health. April 2006. ISBN 1-74186-357-0. https://www1.health.gov.au/internet/publications/publishing.nsf/Content/mathematical-models~mathematical-models-models.htm~mathematical-models-2.2.htm. Retrieved 2020-02-01. 
  4. ↑ "A guide to R - the pandemic's misunderstood metric". Nature 583 (7816): 346–348. July 2020. doi:10.1038/d41586-020-02009-w. PMID 32620883. Bibcode: 2020Natur.583..346A. 
  5. ↑ "Notes On R0". https://web.stanford.edu/~jhj1/teachingdocs/Jones-on-R0.pdf. 
  6. ↑ "Why 'Exponential Growth' Is So Scary For The COVID-19 Coronavirus" (in en). https://www.forbes.com/sites/startswithabang/2020/03/17/why-exponential-growth-is-so-scary-for-the-covid-19-coronavirus/. 
  7. ↑ 7.0 7.1 7.2 7.3 7.4 "Complexity of the Basic Reproduction Number (R0)". Emerging Infectious Diseases 25 (1): 1–4. January 2019. doi:10.3201/eid2501.171901. PMID 30560777. 
  8. ↑ Fine, P.; Eames, K.; Heymann, D. L. (1 April 2011). "'Herd Immunity': A Rough Guide". Clinical Infectious Diseases 52 (7): 911–916. doi:10.1093/cid/cir007. PMID 21427399. 
  9. ↑ 9.0 9.1 Hiraoka, Takayuki; K. Rizi, Abbas; Kivelä, Mikko; Saramäki, Jari (2022-05-12). "Herd immunity and epidemic size in networks with vaccination homophily". Physical Review E 105 (5): L052301. doi:10.1103/PhysRevE.105.L052301. PMID 35706197. Bibcode: 2022PhRvE.105e2301H. https://link.aps.org/doi/10.1103/PhysRevE.105.L052301. 
  10. ↑ "Ross, macdonald, and a theory for the dynamics and control of mosquito-transmitted pathogens". PLOS Pathogens 8 (4): e1002588. 2012-04-05. doi:10.1371/journal.ppat.1002588. PMID 22496640. 
  11. ↑ "The analysis of equilibrium in malaria". Tropical Diseases Bulletin 49 (9): 813–29. September 1952. PMID 12995455. 
  12. ↑ 12.0 12.1 J.H. Jones, Notes on R0. Stanford University (2007).
  13. ↑ "The intrinsic transmission dynamics of tuberculosis epidemics". Nature Medicine 1 (8): 815–21. August 1995. doi:10.1038/nm0895-815. PMID 7585186. 
  14. ↑ "Quantifying TB transmission: a systematic review of reproduction number and serial interval estimates for tuberculosis". Epidemiology and Infection 146 (12): 1478–1494. September 2018. doi:10.1017/S0950268818001760. PMID 29970199. 
  15. ↑ 15.0 15.1 "On the definition and the computation of the basic reproduction ratio R0 in models for infectious diseases in heterogeneous populations". Journal of Mathematical Biology 28 (4): 365–82. 1990. doi:10.1007/BF00178324. PMID 2117040. 
  16. ↑ Network Science by Albert-László Barabási. http://networksciencebook.com/. 
  17. ↑ Kenah, Eben; Robins, James M. (September 2007). "Second look at the spread of epidemics on networks". Physical Review E 76 (3 Pt 2): 036113. doi:10.1103/PhysRevE.76.036113. ISSN 1539-3755. PMID 17930312. Bibcode: 2007PhRvE..76c6113K. 
  18. ↑ Pastor-Satorras, Romualdo; Castellano, Claudio; Van Mieghem, Piet; Vespignani, Alessandro (2015-08-31). "Epidemic processes in complex networks". Reviews of Modern Physics 87 (3): 925–979. doi:10.1103/RevModPhys.87.925. Bibcode: 2015RvMP...87..925P. 
  19. ↑ K. Rizi, Abbas; Faqeeh, Ali; Badie-Modiri, Arash; Kivelä, Mikko (2022-04-20). "Epidemic spreading and digital contact tracing: Effects of heterogeneous mixing and quarantine failures". Physical Review E 105 (4): 044313. doi:10.1103/PhysRevE.105.044313. PMID 35590624. Bibcode: 2022PhRvE.105d4313R. 
  20. ↑ Diekmann, O.; Heesterbeek, J. A. P.; Metz, J. A. J. (1990-06-01). "On the definition and the computation of the basic reproduction ratio R0 in models for infectious diseases in heterogeneous populations" (in en). Journal of Mathematical Biology 28 (4): 365–382. doi:10.1007/BF00178324. ISSN 1432-1416. PMID 2117040. https://doi.org/10.1007/BF00178324. 
  21. ↑ 21.0 21.1 Heffernan, J.M; Smith, R.J; Wahl, L.M (2005-09-22). "Perspectives on the basic reproductive ratio". Journal of the Royal Society Interface 2 (4): 281–293. doi:10.1098/rsif.2005.0042. ISSN 1742-5689. PMID 16849186. 
  22. ↑ 22.0 22.1 van den Driessche, P.; Watmough, James (2002-11-01). "Reproduction numbers and sub-threshold endemic equilibria for compartmental models of disease transmission" (in en). Mathematical Biosciences 180 (1): 29–48. doi:10.1016/S0025-5564(02)00108-6. ISSN 0025-5564. PMID 12387915. https://www.sciencedirect.com/science/article/pii/S0025556402001086. 
  23. ↑ Diekmann, Odo; Heesterbeek, Hans; Britton, Tom (2012-11-18) (in en). Mathematical Tools for Understanding Infectious Disease Dynamics. Princeton University Press. ISBN 978-0-691-15539-5. https://press.princeton.edu/books/hardcover/9780691155395/mathematical-tools-for-understanding-infectious-disease-dynamics. 
  24. ↑ van den Driessche, P.; Watmough, James (2008), Brauer, Fred; van den Driessche, Pauline; Wu, Jianhong, eds., "Further Notes on the Basic Reproduction Number" (in en), Mathematical Epidemiology, Lecture Notes in Mathematics (Berlin, Heidelberg: Springer) 1945: pp. 159–178, doi:10.1007/978-3-540-78911-6_6, ISBN 978-3-540-78911-6, https://doi.org/10.1007/978-3-540-78911-6_6, retrieved 2022-11-08 
  25. ↑ "Genomic Analysis of Viral Outbreaks". Annual Review of Virology 3 (1): 173–195. September 2016. doi:10.1146/annurev-virology-110615-035747. PMID 27501264. PMC 5210220. http://nrs.harvard.edu/urn-3:HUL.InstRepos:40050023. 
  26. ↑ "Transmission dynamics and control of severe acute respiratory syndrome". Science 300 (5627): 1966–70. June 2003. doi:10.1126/science.1086616. PMID 12766207. Bibcode: 2003Sci...300.1966L. 
  27. ↑ Rihan, Fathalla A.; Anwar, M. Naim (2012). "Qualitative Analysis of Delayed SIR Epidemic Model with a Saturated Incidence Rate". International Journal of Differential Equations 2012: 1–13. doi:10.1155/2012/408637. 
  28. ↑ "Role of herd immunity in determining the effect of vaccines against sexually transmitted disease". The Journal of Infectious Diseases 191 (Suppl 1): S97-106. February 2005. doi:10.1086/425271. PMID 15627236. 
  29. ↑ "Viral evolution and transmission effectiveness". World Journal of Virology 1 (5): 131–4. October 2012. doi:10.5501/wjv.v1.i5.131. PMID 24175217. 
  30. ↑ Theories and Simulations of Complex Social Systems. Springer. 2013. pp. 134–35. ISBN 978-3642391491. https://books.google.com/books?id=AdLBBAAAQBAJ&pg=PA134. Retrieved 29 March 2015. 
  31. ↑ 31.0 31.1 "The failure of R0". Computational and Mathematical Methods in Medicine 2011 (527610): 527610. 2011. doi:10.1155/2011/527610. PMID 21860658. 
  32. ↑ 32.0 32.1 "The Misunderstood Number That Predicts Epidemics", vice.com, October 6, 2014, https://www.vice.com/en_us/article/pgazpv/meet-r-nought-the-magic-number-that-spreads-infectious-diseases, retrieved 2020-03-23 
  33. ↑ Balkew TM (December 2010). The SIR Model When S(t) is a Multi-Exponential Function (Thesis). East Tennessee State University.
  34. ↑ The Medical Department of the United States Army in the World War, vol. IX: Communicable and Other Diseases. Washington: U.S.: U.S. Government Printing Office. 1928. pp. 116–7. 
  35. ↑ "The Basic Reproduction Ratio". Mathematical Epidemiology of Infectious Diseases : Model Building, Analysis and Interpretation. New York: Wiley. 2000. pp. 73–98. ISBN 0-471-49241-8. https://books.google.com/books?id=5VjSaAf35pMC&pg=PA73. 
  36. ↑ "The basic reproductive number of Ebola and the effects of public health measures: the cases of Congo and Uganda". Journal of Theoretical Biology 229 (1): 119–26. July 2004. doi:10.1016/j.jtbi.2004.03.006. PMID 15178190. Bibcode: 2004JThBi.229..119C. 
  37. ↑ "Basic mathematical models for the temporal dynamics of HAV in medium-endemicity Italian areas". Vaccine 26 (13): 1697–707. March 2008. doi:10.1016/j.vaccine.2007.12.058. PMID 18314231. 
  38. ↑ von Csefalvay, Chris (2023-01-01), von Csefalvay, Chris, ed., "2 - Simple compartmental models: The bedrock of mathematical epidemiology" (in en), Computational Modeling of Infectious Disease (Academic Press): pp. 19–91, doi:10.1016/b978-0-32-395389-4.00011-6, ISBN 978-0-323-95389-4, https://www.sciencedirect.com/science/article/pii/B9780323953894000116, retrieved 2023-03-02 
  39. ↑ "Perspectives on the basic reproductive ratio". Journal of the Royal Society, Interface 2 (4): 281–93. September 2005. doi:10.1098/rsif.2005.0042. PMID 16849186. 
  40. ↑ "The basic reproduction number (R0) of measles: a systematic review". The Lancet. Infectious Diseases 17 (12): e420–e428. December 2017. doi:10.1016/S1473-3099(17)30307-9. PMID 28757186. 
  41. ↑ Ireland's Health Services. Health Care Worker Information. https://www.hse.ie/eng/health/immunisation/hcpinfo/guidelines/chapter23.pdf. Retrieved 2020-03-27. 
  42. ↑ Australian government Department of Health Mumps Laboratory Case Definition (LCD)
  43. ↑ Centers for Disease Control and Prevention; World Health Organization (2001). "History and epidemiology of global smallpox eradication". Smallpox: disease, prevention, and intervention (training course) (Presentation). Atlanta: Centers for Disease Control and Prevention (published 2014-08-25). cdc:27929. Archived (PDF) from the original on 2017-03-17. Retrieved 2021-06-17.
  44. ↑ Fine, Paul E. M. (1993). "Herd Immunity: History, Theory, Practice". Epidemiologic Reviews 15 (2): 265–302. doi:10.1093/oxfordjournals.epirev.a036121. PMID 8174658. 
  45. ↑ Luman, ET; Barker, LE; Simpson, DM; Rodewald, LE; Szilagyi, PG; Zhao, Z (May 2001). "National, state, and urban-area vaccination-coverage levels among children aged 19–35 months, United States, 1999". American Journal of Preventive Medicine 20 (4): 88–153. doi:10.1016/s0749-3797(01)00274-4. PMID 12174806. 
  46. ↑ Jiles, RB; Fuchs, C; Klevens, RM (22 September 2000). "Vaccination coverage among children enrolled in Head Start programs or day care facilities or entering school". Morbidity and Mortality Weekly Report 49 (9): 27–38. PMID 11016876. https://www.cdc.gov/mmwr/preview/mmwrhtml/ss4909a2.htm. 
  47. ↑ "Incidence and reproduction numbers of pertussis: estimates from serological and social contact data in five European countries". PLOS Medicine 7 (6): e1000291. June 2010. doi:10.1371/journal.pmed.1000291. PMID 20585374. 
  48. ↑ "Transmission potential of smallpox in contemporary populations". Nature 414 (6865): 748–51. December 2001. doi:10.1038/414748a. PMID 11742399. Bibcode: 2001Natur.414..748G. https://www.nature.com/articles/414748a. Retrieved 18 March 2020. 
  49. ↑ "Playing the Numbers Game: R0". National Emerging Special Pathogen Training and Education Center. January 30, 2020. https://netec.org/2020/01/30/playing-the-numbers-game-r0/. "[...] while infections that require sexual contact like HIV have a lower R0 (2-5)." 
  50. ↑ 50.0 50.1 Prather, Kimberly A.; Marr, Linsey C.; Schooley, Robert T.; McDiarmid, Melissa A.; Wilson, Mary E.; Milton, Donald K. (16 October 2020). "Airborne transmission of SARS-CoV-2". Science 370 (6514): 303.2–304. doi:10.1126/science.abf0521. PMID 33020250. Bibcode: 2020Sci...370..303P. 
  51. ↑ 51.0 51.1 Billah, Arif; Miah, Mamun; Khan, Nuruzzaman (11 November 2020). "Reproductive number of coronavirus: A systematic review and meta-analysis based on global level evidence". PLOS ONE 15 (11): e0242128. doi:10.1371/journal.pone.0242128. PMID 33175914. Bibcode: 2020PLoSO..1542128B. 
  52. ↑ Template:Cite tech report
  53. ↑ "Clinical and Epidemiological Aspects of Diphtheria: A Systematic Review and Pooled Analysis". Clinical Infectious Diseases 71 (1): 89–97. June 2020. doi:10.1093/cid/ciz808. PMID 31425581. 
  54. ↑ "Magic formula that will determine whether Ebola is beaten". Telegraph.Co.Uk. November 6, 2014. https://www.telegraph.co.uk/news/worldnews/ebola/11213280/Magic-formula-that-will-determine-whether-Ebola-is-beaten.html. 
  55. ↑ "Modelling human-to-human transmission of monkeypox". Bulletin of the World Health Organization 98 (9): 638–640. 2020-09-01. doi:10.2471/BLT.19.242347. ISSN 0042-9686. PMID 33012864. PMC 7463189. http://www.who.int/bulletin/volumes/98/9/19-242347.pdf. 
  56. ↑ "The study of human monkeypox disease in 2022 using the epidemic models: herd immunity and the basic reproduction number case". Annals of Medicine & Surgery 85 (2): 316–321. February 2023. doi:10.1097/MS9.0000000000000229. ISSN 2049-0801. PMID 36845803. PMC 9949786. https://journals.lww.com/annals-of-medicine-and-surgery/Fulltext/2023/02000/The_study_of_human_monkeypox_disease_in_2022_using.54.aspx. 
  57. ↑ "A systematic review of early modelling studies of Ebola virus disease in West Africa". Epidemiology and Infection 145 (6): 1069–1094. April 2017. doi:10.1017/S0950268817000164. PMID 28166851. "The median of the R0 mean estimate for the ongoing epidemic (overall) is 1.78 (interquartile range: 1.44, 1.80)". 
  58. ↑ 58.0 58.1 "Seasonal influenza in the United States, France, and Australia: transmission and prospects for control". Epidemiology and Infection (Cambridge University Press) 136 (6): 852–64. June 2008. doi:10.1017/S0950268807009144. PMID 17634159. "The reproduction number across influenza seasons and countries lied in the range 0.9–2.0 with an overall mean of 1.3, and 95% confidence interval (CI) 1.2–1.4.". 
  59. ↑ Martínez, Valeria P.; Di Paola, Nicholas; Alonso, Daniel O.; Pérez-Sautu, Unai; Bellomo, Carla M.; Iglesias, Ayelén A. et al. (3 December 2020). "'Super-Spreaders' and Person-to-Person Transmission of Andes Virus in Argentina". New England Journal of Medicine 383 (23): 2230–2241. doi:10.1056/NEJMoa2009040. PMID 33264545. 
  60. ↑ "The pandemic potential of Nipah virus". Antiviral Research 100 (1): 38–43. October 2013. doi:10.1016/j.antiviral.2013.07.011. PMID 23911335. 
  61. ↑ "The role of superspreading in Middle East respiratory syndrome coronavirus (MERS-CoV) transmission". Euro Surveillance 20 (25): 14–8. June 2015. doi:10.2807/1560-7917.ES2015.20.25.21167. PMID 26132768. 
  62. ↑ "Omicron transmission: how contagious diseases spread" (in en). 2021-12-21. https://www.nebraskamed.com/COVID/how-quickly-do-diseases-spread. 
  63. ↑ Liu, Y (9 March 2022). "The effective reproductive number of the Omicron variant of SARS-CoV-2 is several times relative to Delta". Journal of Travel Medicine 29 (3): Table 1. doi:10.1093/jtm/taac037. ISSN 1708-8305. PMID 35262737. 
  64. ↑ Liu, Ying; Rocklöv, Joacim (2021-10-01). "The reproductive number of the Delta variant of SARS-CoV-2 is far higher compared to the ancestral SARS-CoV-2 virus". Journal of Travel Medicine 28 (7). doi:10.1093/jtm/taab124. ISSN 1708-8305. PMID 34369565. PMC 8436367. https://academic.oup.com/jtm/article/28/7/taab124/6346388. 
  65. ↑ Gallagher, James (12 June 2021). "Covid: Is there a limit to how much worse variants can get?". BBC News. https://www.bbc.com/news/health-57431420. 

Further reading



Retrieved from "https://handwiki.org/wiki/index.php?title=Medicine:Basic_reproduction_number&oldid=3268159"