Chemistry:Sebacoyl chloride

From HandWiki
Revision as of 17:11, 23 October 2022 by Wikisleeper (talk | contribs) (change)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Sebacoyl chloride
Skeletal formula of sebacoyl chloride
Ball-and-stick model
Names
Preferred IUPAC name
Decanedioyl dichloride
Other names
Sebacoyl dichloride
Identifiers
3D model (JSmol)
ChemSpider
EC Number
  • 203-843-4
MeSH C061659
UNII
Properties
C10H16Cl2O2
Molar mass 239.14 g/mol
Density 1.12 g cm−3
Melting point −2.5 °C (27.5 °F; 270.6 K)
Boiling point 220 °C (428 °F; 493 K)
Hazards
Safety data sheet External MSDS
NFPA 704 (fire diamond)
Flammability code 0: Will not burn. E.g. waterHealth code 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasReactivity code 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g. white phosphorusSpecial hazard W: Reacts with water in an unusual or dangerous manner. E.g. sodium, sulfuric acidNFPA 704 four-colored diamond
0
3
2
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is ☑Y☒N ?)
Infobox references
Tracking categories (test):

Sebacoyl chloride (or sebacoyl dichloride) is a di-acyl chloride, with formula (CH2)8(COCl)2. A colorless oily liquid with a pungent odor, it is soluble in hydrocarbons and ethers. Sebacoyl chloride is corrosive; like all acyl chlorides, it hydrolyzes, evolving hydrogen chloride. It is less susceptible to hydrolysis though than shorter chain aliphatic acyl chlorides.[1]

Preparation

Sebacoyl chloride can be prepared by reacting sebacic acid with an excess of thionyl chloride. Residual thionyl chloride can be removed by distillation.[2]

Use

Sebacoyl chloride can be polymerized with hexamethylenediamine yielding nylon-6,10.[3]

See also

References

  1. ↑ Morgan, Paul W.; Kwolek, Stephanie L. (April 1959). "The nylon rope trick: Demonstration of condensation polymerization". Journal of Chemical Education 36 (4): 182. doi:10.1021/ed036p182. Bibcode: 1959JChEd..36..182M. 
  2. ↑ Erdmann, L.; Uhrich, K.E. (October 2000). "Synthesis and degradation characteristics of salicylic acid-derived poly(anhydride-esters)". Biomaterials 21 (19): 1941–1946. doi:10.1016/S0142-9612(00)00073-9. PMID 10941915. 
  3. ↑ Enkelmann, Volker; Wegner, Gerhard (1976-11-01). "Mechanism of interfacial polycondensation and the direct synthesis of stable polyamide membranes" (in en). Die Makromolekulare Chemie 177 (11): 3177–3189. doi:10.1002/macp.1976.021771106. ISSN 0025-116X. 



Retrieved from "https://handwiki.org/wiki/index.php?title=Chemistry:Sebacoyl_chloride&oldid=2206933"