Chemistry:Methyl vinyl ether
| |
| Names | |
|---|---|
| Preferred IUPAC name
Methoxyethene | |
| Other names
Ethenyl methyl ether
Vinyl methyl ether | |
| Identifiers | |
3D model (JSmol)
|
|
| ChemSpider | |
| EC Number |
|
PubChem CID
|
|
| UNII | |
| UN number | 1087 |
| |
| |
| Properties | |
| C3H6O | |
| Molar mass | 58.080 g·mol−1 |
| Density | 0.77 g/cm−3[1] |
| Melting point | −122 °C (−188 °F; 151 K)[1] |
| Boiling point | 6 °C (43 °F; 279 K)[1] |
| Vapor pressure | 157 kPa (20 °C)[1] |
| Hazards | |
| GHS pictograms | 
|
| GHS Signal word | Danger |
| H220 | |
| P210, P377, P381, P403 | |
| NFPA 704 (fire diamond) | |
| Flash point | −60 °C (−76 °F; 213 K) |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). | |
 verify (what is   ?)
| |
| Infobox references | |
Methyl vinyl ether is an organic compound with the chemical formula CH3OCH=CH2. A colorless gas, it is the simplest enol ether. It is used as a synthetic building block, as is the related compound ethyl vinyl ether (a liquid at room temperature).
Preparation
Methyl vinyl ether can be made by reaction of acetylene and methanol in presence of a base.[2][3]
Reactions
The alkene portion of the molecule is reactive in many ways. It is prone to polymerization, leading to formation of polyvinyl ethers. Polymerization is typically initiated with Lewis acids such as boron trifluoride.[4] This mode of reactivity is analogous to the way vinyl acetate and vinyl chloride can be polymerized to form polyvinyl acetate and polyvinyl chloride, respectively.
Methyl vinyl ether also participates in [4+2] cycloaddition reactions.[5] Its reaction with acrolein is the first step in the commercial synthesis of glutaraldehyde.
The alkene can be deprotonated at the vinyl carbon adjacent to the oxygen.[6] In particular, this approach allows the synthesis of a variety of acyl derivatives of silicon, germanium, and tin that cannot be made easily by other routes.[7][8][9]
Toxicity
The toxicity of vinyl ethers has been heavily investigated because divinyl ether has been used as an anesthetic. The acute LD50 for methyl vinyl ether is greater than 4 g/kg (rats, oral).[3]
References
- ↑ 1.0 1.1 1.2 1.3 Record of Methylvinylether in the GESTIS Substance Database of the Institute for Occupational Safety and Health, accessed on 20 April 2008.
- ↑ David Trimma; Noel Cant; Yun Lei (2009). "Oxygenated fuel additives: The formation of methyl vinyl ether and 1,1-dimethoxyethane by the catalysed reaction of acetylene with methanol". Catalysis Today 145 (1–2): 163–168. doi:10.1016/j.cattod.2008.04.015.
- ↑ 3.0 3.1 Ernst Hofmann; Hans‐Joachim Klimisch; René Backes; Regina Vogelsang; Lothar Franz; Robert Feuerhake (2011). Ullmann's Encyclopedia of Industrial Chemistry. Wiley-VCH. doi:10.1002/14356007.a27_435.pub2. ISBN 978-3-527-30673-2.
- ↑ Gerd Schröder (2012). Ullmann's Encyclopedia of Industrial Chemistry. Wiley-VCH. doi:10.1002/14356007.a22_011. ISBN 978-3-527-30673-2.
- ↑ Longley Jr., R. I.; Emerson, W. S. (1950). "The 1,4-Addition of Vinyl Ethers to α,β-Unsaturated Carbonyl Compounds". J. Am. Chem. Soc. 72 (7): 3079–3081. doi:10.1021/ja01163a076.
- ↑ Lever Jr., O. W. (1976). "New horizons in carbonyl chemistry: reagents for nucleophilic acylation". Tetrahedron 32 (16): 1943–1971. doi:10.1016/0040-4020(76)80088-9.
- ↑ Soderquist, J. A.; Hassner, A. (1980). "Synthetic methods. 15. Unsaturated acyl derivatives of silicon, germanium, and tin from metalated enol ethers". J. Am. Chem. Soc. 102 (5): 1577–1583. doi:10.1021/ja00525a019.
- ↑ Soderquist, J. A.; Hassner, A. (1980). "Vinylmetalloids. 3. Sila- and germacyclopentan-2-ones from metallated enol ethers". J. Org. Chem. 45 (3): 541–543. doi:10.1021/jo01291a041.
- ↑ Soderquist, J. A. (1990). "Acetyltrimethylsilane". Org. Synth. 68: 25. doi:10.15227/orgsyn.068.0025.
 |  |
