Biology:Transmembrane protein

From HandWiki
Revision as of 17:08, 11 February 2024 by Gametune (talk | contribs) (simplify)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Short description: Protein spanning across a biological membrane
Schematic representation of transmembrane proteins: 1) a single-pass membrane protein (α-helix) 2) a multipass membrane protein (α-helix) 3) a multipass membrane protein β-sheet. The membrane is represented in light yellow.

A transmembrane protein is a type of integral membrane protein that spans the entirety of the cell membrane. Many transmembrane proteins function as gateways to permit the transport of specific substances across the membrane. They frequently undergo significant conformational changes to move a substance through the membrane. They are usually highly hydrophobic and aggregate and precipitate in water. They require detergents or nonpolar solvents for extraction, although some of them (beta-barrels) can be also extracted using denaturing agents.

The peptide sequence that spans the membrane, or the transmembrane segment, is largely hydrophobic and can be visualized using the hydropathy plot.[1] Depending on the number of transmembrane segments, transmembrane proteins can be classified as single-pass membrane proteins, or as multipass membrane proteins.[2] Some other integral membrane proteins are called monotopic, meaning that they are also permanently attached to the membrane, but do not pass through it.[3]

Types

Classification by structure

There are two basic types of transmembrane proteins:[4] alpha-helical and beta barrels. Alpha-helical proteins are present in the inner membranes of bacterial cells or the plasma membrane of eukaryotic cells, and sometimes in the bacterial outer membrane.[5] This is the major category of transmembrane proteins. In humans, 27% of all proteins have been estimated to be alpha-helical membrane proteins.[6] Beta-barrel proteins are so far found only in outer membranes of gram-negative bacteria, cell walls of gram-positive bacteria, outer membranes of mitochondria and chloroplasts, or can be secreted as pore-forming toxins. All beta-barrel transmembrane proteins have simplest up-and-down topology, which may reflect their common evolutionary origin and similar folding mechanism.[citation needed]

In addition to the protein domains, there are unusual transmembrane elements formed by peptides. A typical example is gramicidin A, a peptide that forms a dimeric transmembrane β-helix.[7] This peptide is secreted by gram-positive bacteria as an antibiotic. A transmembrane polyproline-II helix has not been reported in natural proteins. Nonetheless, this structure was experimentally observed in specifically designed artificial peptides.[8]

Classification by topology

This classification refers to the position of the protein N- and C-termini on the different sides of the lipid bilayer. Types I, II, III and IV are single-pass molecules. Type I transmembrane proteins are anchored to the lipid membrane with a stop-transfer anchor sequence and have their N-terminal domains targeted to the endoplasmic reticulum (ER) lumen during synthesis (and the extracellular space, if mature forms are located on cell membranes). Type II and III are anchored with a signal-anchor sequence, with type II being targeted to the ER lumen with its C-terminal domain, while type III have their N-terminal domains targeted to the ER lumen. Type IV is subdivided into IV-A, with their N-terminal domains targeted to the cytosol and IV-B, with an N-terminal domain targeted to the lumen.[9] The implications for the division in the four types are especially manifest at the time of translocation and ER-bound translation, when the protein has to be passed through the ER membrane in a direction dependent on the type.[citation needed]

Group I and II transmembrane proteins have opposite final topologies. Group I proteins have the N terminus on the far side and C terminus on the cytosolic side. Group II proteins have the C terminus on the far side and N terminus in the cytosol. However final topology not the only criterion for defining transmembrane protein groups, rather location of topogenic determinants and mechanism of assembly is considered in the classification[10]

3D structure

Increase in the number of 3D structures of membrane proteins known

Membrane protein structures can be determined by X-ray crystallography, electron microscopy or NMR spectroscopy.[11] The most common tertiary structures of these proteins are transmembrane helix bundle and beta barrel. The portion of the membrane proteins that are attached to the lipid bilayer (see annular lipid shell) consist mostly of hydrophobic amino acids.[12]

Membrane proteins which have hydrophobic surfaces, are relatively flexible and are expressed at relatively low levels. This creates difficulties in obtaining enough protein and then growing crystals. Hence, despite the significant functional importance of membrane proteins, determining atomic resolution structures for these proteins is more difficult than globular proteins.[13] As of January 2013 less than 0.1% of protein structures determined were membrane proteins despite being 20–30% of the total proteome.[14] Due to this difficulty and the importance of this class of proteins methods of protein structure prediction based on hydropathy plots, the positive inside rule and other methods have been developed.[15][16][17]

Thermodynamic stability and folding

Stability of alpha-helical transmembrane proteins

Transmembrane alpha-helical (α-helical) proteins are unusually stable judging from thermal denaturation studies, because they do not unfold completely within the membranes (the complete unfolding would require breaking down too many α-helical H-bonds in the nonpolar media). On the other hand, these proteins easily misfold, due to non-native aggregation in membranes, transition to the molten globule states, formation of non-native disulfide bonds, or unfolding of peripheral regions and nonregular loops that are locally less stable.[citation needed]

It is also important to properly define the unfolded state. The unfolded state of membrane proteins in detergent micelles is different from that in the thermal denaturation experiments.[citation needed] This state represents a combination of folded hydrophobic α-helices and partially unfolded segments covered by the detergent. For example, the "unfolded" bacteriorhodopsin in SDS micelles has four transmembrane α-helices folded, while the rest of the protein is situated at the micelle-water interface and can adopt different types of non-native amphiphilic structures. Free energy differences between such detergent-denatured and native states are similar to stabilities of water-soluble proteins (< 10 kcal/mol).[citation needed]

Folding of α-helical transmembrane proteins

Refolding of α-helical transmembrane proteins in vitro is technically difficult. There are relatively few examples of the successful refolding experiments, as for bacteriorhodopsin. In vivo, all such proteins are normally folded co-translationally within the large transmembrane translocon. The translocon channel provides a highly heterogeneous environment for the nascent transmembrane α-helices. A relatively polar amphiphilic α-helix can adopt a transmembrane orientation in the translocon (although it would be at the membrane surface or unfolded in vitro), because its polar residues can face the central water-filled channel of the translocon. Such mechanism is necessary for incorporation of polar α-helices into structures of transmembrane proteins. The amphiphilic helices remain attached to the translocon until the protein is completely synthesized and folded. If the protein remains unfolded and attached to the translocon for too long, it is degraded by specific "quality control" cellular systems.[citation needed]

Stability and folding of beta-barrel transmembrane proteins

Stability of beta barrel (β-barrel) transmembrane proteins is similar to stability of water-soluble proteins, based on chemical denaturation studies. Some of them are very stable even in chaotropic agents and high temperature. Their folding in vivo is facilitated by water-soluble chaperones, such as protein Skp. It is thought that β-barrel membrane proteins come from one ancestor even having different number of sheets which could be added or doubled during evolution. Some studies show a huge sequence conservation among different organisms and also conserved amino acids which hold the structure and help with folding.[18]

3D structures

Light absorption-driven transporters

Oxidoreduction-driven transporters

Electrochemical potential-driven transporters

  • Proton or sodium translocating F-type and V-type ATPases

P-P-bond hydrolysis-driven transporters

  • P-type calcium ATPase (five different conformations)
  • Calcium ATPase regulators phospholamban and sarcolipin
  • ABC transporters
  • General secretory pathway (Sec) translocon (preprotein translocase SecY)

Porters (uniporters, symporters, antiporters)

  • Mitochondrial carrier proteins
  • Major Facilitator Superfamily (Glycerol-3-phosphate transporter, Lactose permease, and Multidrug transporter EmrD)
  • Resistance-nodulation-cell division (multidrug efflux transporter AcrB, see multidrug resistance)
  • Dicarboxylate/amino acid:cation symporter (proton glutamate symporter)
  • Monovalent cation/proton antiporter (Sodium/proton antiporter 1 NhaA)
  • Neurotransmitter sodium symporter
  • Ammonia transporters
  • Drug/Metabolite Transporter (small multidrug resistance transporter EmrE - the structures are retracted as erroneous)

Alpha-helical channels including ion channels

Enzymes

Proteins with alpha-helical transmembrane anchors

Beta-barrels composed of a single polypeptide chain

Note: n and S are, respectively, the number of beta-strands and the "shear number"[20] of the beta-barrel

Beta-barrels composed of several polypeptide chains

  • Trimeric autotransporter (n=12,S=12)
  • Outer membrane efflux proteins, also known as trimeric outer membrane factors (n=12,S=18) including TolC and multidrug resistance proteins
  • MspA porin (octamer, n=S=16) and α-hemolysin (heptamer n=S=14) . These proteins are secreted.

See also

References

  1. ↑ Manor, Joshua; Feldblum, Esther S.; Arkin, Isaiah T. (2012). "Environment Polarity in Proteins Mapped Noninvasively by FTIR Spectroscopy". The Journal of Physical Chemistry Letters 3 (7): 939–944. doi:10.1021/jz300150v. PMID 22563521. 
  2. ↑ Alberts, Bruce; Johnson, Alexander; Lewis, Julian; Raff, Martin; Roberts, Keith; Walter, Peter (2002). "Membrane Proteins" (in en). Garland Science. https://www.ncbi.nlm.nih.gov/books/NBK26878/. 
  3. ↑ Steven R. Goodman (2008). Medical cell biology. Academic Press. pp. 37–. ISBN 978-0-12-370458-0. https://books.google.com/books?id=WO6EVUgWw7AC&pg=PA37. Retrieved 24 November 2010. 
  4. ↑ Jin Xiong (2006). Essential bioinformatics. Cambridge University Press. pp. 208–. ISBN 978-0-521-84098-9. https://books.google.com/books?id=AFsu7_goA8kC&pg=PA208. Retrieved 13 November 2010. 
  5. ↑ alpha-helical proteins in outer membranes include Stannin and certain lipoproteins, and others
  6. ↑ "Mapping the human membrane proteome: a majority of the human membrane proteins can be classified according to function and evolutionary origin". BMC Biol. 7: 50. 2009. doi:10.1186/1741-7007-7-50. PMID 19678920. 
  7. ↑ Nicholson, L. K.; Cross, T. A. (1989). "Gramicidin cation channel: an experimental determination of the right-handed helix sense and verification of .beta.-type hydrogen bonding" (in en). Biochemistry 28 (24): 9379–9385. doi:10.1021/bi00450a019. PMID 2482072. 
  8. ↑ Kubyshkin, Vladimir; Grage, Stephan L.; Ulrich, Anne S.; Budisa, Nediljko (2019). "Bilayer thickness determines the alignment of model polyproline helices in lipid membranes" (in en). Physical Chemistry Chemical Physics 21 (40): 22396–22408. doi:10.1039/c9cp02996f. PMID 31577299. Bibcode: 2019PCCP...2122396K. 
  9. ↑ Harvey Lodish etc.; Molecular Cell Biology, Sixth edition, p.546
  10. ↑ Goder, Veit; Spiess, Martin (31 August 2001). "Topogenesis of membrane proteins: determinants and dynamics". FEBS Letters 504 (3): 87–93. doi:10.1016/S0014-5793(01)02712-0. PMID 11532438. 
  11. ↑ Cross, Timothy A.; Sharma, Mukesh; Yi, Myunggi; Zhou, Huan-Xiang (2011). "Influence of Solubilizing Environments on Membrane Protein Structures". Trends in Biochemical Sciences 36 (2): 117–125. doi:10.1016/j.tibs.2010.07.005. PMID 20724162. 
  12. ↑ White, Stephen. "General Principle of Membrane Protein Folding and Stability". Stephen White Laboratory Homepage. 10 Nov. 2009. web.[verification needed]
  13. ↑ Carpenter, Elisabeth P; Beis, Konstantinos; Cameron, Alexander D; Iwata, So (October 2008). "Overcoming the challenges of membrane protein crystallography". Current Opinion in Structural Biology 18 (5): 581–586. doi:10.1016/j.sbi.2008.07.001. PMID 18674618. 
  14. ↑ "Membrane Proteins of known 3D Structure". http://blanco.biomol.uci.edu/mpstruc/. 
  15. ↑ Elofsson, Arne; Heijne, Gunnar von (7 June 2007). "Membrane Protein Structure: Prediction versus Reality". Annual Review of Biochemistry 76 (1): 125–140. doi:10.1146/annurev.biochem.76.052705.163539. PMID 17579561. 
  16. ↑ Chen, Chien Peter; Rost, Burkhard (2002). "State-of-the-art in membrane protein prediction". Applied Bioinformatics 1 (1): 21–35. PMID 15130854. 
  17. ↑ Hopf, Thomas A.; Colwell, Lucy J.; Sheridan, Robert; Rost, Burkhard; Sander, Chris; Marks, Debora S. (June 2012). "Three-Dimensional Structures of Membrane Proteins from Genomic Sequencing". Cell 149 (7): 1607–1621. doi:10.1016/j.cell.2012.04.012. PMID 22579045. 
  18. ↑ Michalik, Marcin; Orwick-Rydmark, Marcella; Habeck, Michael; Alva, Vikram; Arnold, Thomas; Linke, Dirk; Permyakov, Eugene A. (3 August 2017). "An evolutionarily conserved glycine-tyrosine motif forms a folding core in outer membrane proteins". PLOS ONE 12 (8): e0182016. doi:10.1371/journal.pone.0182016. PMID 28771529. Bibcode: 2017PLoSO..1282016M. 
  19. ↑ "Structural adaptations in a membrane enzyme that terminates endocannabinoid signaling". Science 298 (5599): 1793–6. November 2002. doi:10.1126/science.1076535. PMID 12459591. Bibcode: 2002Sci...298.1793B. 
  20. ↑ "Principles determining the structure of beta-sheet barrels in proteins. I. A theoretical analysis". J. Mol. Biol. 236 (5): 1369–81. March 1994. doi:10.1016/0022-2836(94)90064-7. PMID 8126726. 



Retrieved from "https://handwiki.org/wiki/index.php?title=Biology:Transmembrane_protein&oldid=3566875"