Biology:Cre recombinase

From HandWiki
Short description: Genetic recombination enzyme
Cre recombinase
CreRecImage(DNASUBSTRATE).png
Structure of a Cre recombinase enzyme (dimer) bound to its substrate DNA
Identifiers
OrganismEnterobacteria phage P1
Symbolcre
Entrez2777477
RefSeq (Prot)YP_006472.1
UniProtP06956
Other data
EC number2.7.7.-
Chromosomegenome: 0 - 0 Mb

Cre recombinase is a tyrosine recombinase enzyme derived from the P1 bacteriophage. The enzyme uses a topoisomerase I-like mechanism to carry out site specific recombination events. The enzyme (38 kDa) is a member of the integrase family of site specific recombinase and it is known to catalyse the site specific recombination event between two DNA recognition sites (LoxP sites). This 34 base pair (bp) loxP recognition site consists of two 13 bp palindromic sequences which flank an 8bp spacer region. The products of Cre-mediated recombination at loxP sites are dependent upon the location and relative orientation of the loxP sites. Two separate DNA species both containing loxP sites can undergo fusion as the result of Cre mediated recombination. DNA sequences found between two loxP sites are said to be "floxed". In this case the products of Cre mediated recombination depends upon the orientation of the loxP sites. DNA found between two loxP sites oriented in the same direction will be excised as a circular loop of DNA whilst intervening DNA between two loxP sites that are opposingly orientated will be inverted.[1] The enzyme requires no additional cofactors (such as ATP) or accessory proteins for its function.[2]

The enzyme plays important roles in the life cycle of the P1 bacteriophage, such as cyclization of the linear genome and resolution of dimeric chromosomes that form after DNA replication.[3]

Cre recombinase is a widely used tool in the field of molecular biology. The enzyme's unique and specific recombination system is exploited to manipulate genes and chromosomes in a huge range of research, such as gene knock out or knock in studies. The enzyme's ability to operate efficiently in a wide range of cellular environments (including mammals, plants, bacteria, and yeast) enables the Cre-Lox recombination system to be used in a vast number of organisms, making it a particularly useful tool in scientific research.[4]

Discovery

Studies carried out in 1981 by Sternberg and Hamilton demonstrated that the bacteriophage 'P1' had a unique site specific recombination system. EcoRI fragments of the P1 bacteriophage genome were generated and cloned into lambda vectors. A 6.5kb EcoRI fragment (Fragment 7) was found to permit efficient recombination events.[5] The mechanism of these recombination events was known to be unique as they occurred in the absence of bacterial RecA and RecBCD proteins. The components of this recombination system were elucidated using deletion mutagenesis studies. These studies showed that a P1 gene product and a recombination site were both required for efficient recombination events to occur. The P1 gene product was named Cre (causes recombination) and the recombination site was named loxP (locus of crossing (x) over, P1).[5] The Cre protein was purified in 1983 and was found to be a 35,000 Da protein.[2] No high energy cofactors such as ATP or accessory proteins are required for the recombinase activity of the purified protein.[2] Early studies also demonstrated that Cre binds to non specific DNA sequences whilst having a 20 fold higher affinity for loxP sequences and results of early DNA footprinting studies also suggested that Cre molecules bind loxP sites as dimers.[2]

Cartoon model of Cre recombinase bound to its substrate (DNA). A side view
Cartoon model of Cre recombinase bound to its substrate (DNA). The amino terminal domain is shown in blue whilst the carboxyl domain is green. (A side view)
Cartoon model of Cre recombinase bound to its substrate (DNA). A head on view
Cartoon model of Cre recombinase bound to its substrate (DNA). The amino terminal domain is shown in blue whilst the carboxyl domain is green. (A head on view)
Tyrosine recombinase family members[3]
S.cerevisiae Flp recombinase
Bacterial XerC recombinase
Bacterial XerD recombinase
λ integrase protein
HP1 integrase protein

Structure

Cre recombinase consists of 343 amino acids that form two distinct domains. The amino terminal domain encompasses residues 20–129 and this domain contains 5 alpha helical segments linked by a series of short loops. Helices A & E are involved in the formation of the recombinase tetramer with the C terminus region of helix E known to form contacts with the C terminal domain of adjacent subunits. Helices B & D form direct contacts with the major groove of the loxP DNA. These two helices are thought to make three direct contacts to DNA bases at the loxP site. The carboxy terminal domain of the enzyme consists of amino acids 132–341 and it harbours the active site of the enzyme. The overall structure of this domain shares a great deal of structural resemblance to the catalytic domain of other enzymes of the same family such as λ Integrase and HP1 Integrase. This domain is predominantly helical in structure with 9 distinct helices (F−N). The terminal helix (N) protrudes from the main body of the carboxy domain and this helix is reputed to play a role in mediating interactions with other subunits. Crystal structures demonstrate that this terminal N helix buries its hydrophobic surface into an acceptor pocket of an adjacent Cre subunit.[6]

The effect of the two-domain structure is to form a C-shaped clamp that grasps the DNA from opposite sides.[3]

Active site

Cartoon model of Cre recombinase active site. The enzyme is bound to its substrate (DNA).
This cartoon model of Cre recombinase bound to its substrate (DNA) shows the amino acids involved in the active site in red and labelled. This image is generated following cleavage of the DNA.

The active site of the Cre enzyme consists of the conserved catalytic triad residues Arg 173, His 289, Arg 292 as well as the conserved nucleophilic residues Tyr 324 and Trp 315. Unlike some recombinase enzymes such as Flp recombinase, Cre does not form a shared active site between separate subunits and all the residues that contribute to the active site are found on a single subunit. Consequently, when two Cre molecules bind at a single loxP site two active sites are present. Cre mediated recombination requires the formation of a synapse in which two Cre-LoxP complexes associate to form what is known as the synapse tetramer in which 4 distinct active sites are present.[6] Tyr 324 acts as a nucleophile to form a covalent 3’-phosphotyrosine linkage to the DNA substrate. The scissile phosphate (phosphate targeted for nucleophilic attack at the cleavage site) is coordinated by the side chains of the 3 amino acid residues of the catalytic triad (Arg 173, His 289 & Trp 315). The indole nitrogen of tryptophan 315 also forms a hydrogen bond to this scissile phosphate. (n.b A Histidine occupies this site in other tyrosine recombinase family members and performs the same function). This reaction cleaves the DNA and frees a 5’ hydroxyl group. This process occurs in the active site of two out of the four recombinase subunits present at the synapse tetramer. If the 5’ hydroxyl groups attack the 3’-phosphotyrosine linkage one pair of the DNA strands will exchange to form a Holliday junction intermediate.[3]

Applications

Role in bacteriophage P1

Cre recombinase plays important roles in the life cycle of the P1 bacteriophage. Upon infection of a cell the Cre-loxP system is used to cause circularization of the P1 DNA. In addition to this Cre is also used to resolve dimeric lysogenic P1 DNA that forms during the cell division of the phage.[7]

Use in research

Main page: Biology:Cre-Lox recombination

Inducible Cre activation is achieved using CreER (estrogen receptor) variant, which is only activated after delivery of tamoxifen.[8] This is done through the fusion of a mutated ligand binding domain of the estrogen receptor to the Cre recombinase, resulting in Cre becoming specifically activated by tamoxifen. In the absence of tamoxifen, CreER will result in the shuttling of the mutated recombinase into the cytoplasm. The protein will stay in this location in its inactivated state until tamoxifen is given. Once tamoxifen is introduced, it is metabolized into 4-hydroxytamoxifen, which then binds to the ER and results in the translocation of the CreER into the nucleus, where it is then able to cleave the lox sites.[9] Importantly, sometimes fluorescent reporters can be activated in the absence of tamoxifen, due to leakage of a few Cre recombinase molecules into the nucleus which, in combination with very sensitive reporters, results in unintended cell labelling.[10] CreER(T2) was developed to minimize tamoxifen-independent recombination and maximize tamoxifen-sensitivity.

Improvements

In recent years, Cre recombinase has been improved with conversion to preferred mammalian codons, the removal of reported cryptic splice sites, an altered stop codon, and reduced CpG content to reduce the risk of epigenetic silencing in mammals.[11] A number of mutants with enhanced accuracy have also been identified.[12]

See also

References

  1. "Cre recombinase: the universal reagent for genome tailoring". Genesis 26 (2): 99–109. Feb 2000. doi:10.1002/(SICI)1526-968X(200002)26:2<99::AID-GENE1>3.0.CO;2-B. PMID 10686599. 
  2. 2.0 2.1 2.2 2.3 "Bacteriophage P1 site-specific recombination. Purification and properties of the Cre recombinase protein". The Journal of Biological Chemistry 259 (3): 1509–1514. Feb 1984. doi:10.1016/S0021-9258(17)43437-5. PMID 6319400. 
  3. 3.0 3.1 3.2 3.3 "A structural view of cre-loxp site-specific recombination". Annual Review of Biophysics and Biomolecular Structure 30: 87–104. 2001. doi:10.1146/annurev.biophys.30.1.87. PMID 11340053. 
  4. "Crystal structure of a wild-type Cre recombinase-loxP synapse reveals a novel spacer conformation suggesting an alternative mechanism for DNA cleavage activation". Nucleic Acids Research 31 (18): 5449–5460. Sep 2003. doi:10.1093/nar/gkg732. PMID 12954782. 
  5. 5.0 5.1 "Bacteriophage P1 site-specific recombination. I. Recombination between loxP sites". Journal of Molecular Biology 150 (4): 467–486. Aug 1981. doi:10.1016/0022-2836(81)90375-2. PMID 6276557. 
  6. 6.0 6.1 "Structure of Cre recombinase complexed with DNA in a site-specific recombination synapse". Nature 389 (6646): 40–46. Sep 1997. doi:10.1038/37925. PMID 9288963. Bibcode1997Natur.389...40G. 
  7. "The Cre recombinase cleaves the lox site in trans". The Journal of Biological Chemistry 272 (9): 5695–5702. Feb 1997. doi:10.1074/jbc.272.9.5695. PMID 9038180. 
  8. "Genetically engineered mouse models in cancer research". Advances in Cancer Research 106: 113–64. 2010. doi:10.1016/S0065-230X(10)06004-5. ISBN 9780123747716. PMID 20399958. 
  9. "Spontaneous recombinase activity of Cre-ERT2 in vivo". Transgenic Research 26 (3): 411–417. June 2017. doi:10.1007/s11248-017-0018-1. PMID 28409408. 
  10. "T2 lines". Transgenic Research 29 (1): 53–68. February 2020. doi:10.1007/s11248-019-00177-8. PMID 31641921. 
  11. "Codon-improved Cre recombinase (iCre) expression in the mouse". Genesis 32 (1): 19–26. Jan 2002. doi:10.1002/gene.10023. PMID 11835670. 
  12. "Mutants of Cre recombinase with improved accuracy". Nature Communications 4: 2509. Sep 2013. doi:10.1038/ncomms3509. PMID 24056590. Bibcode2013NatCo...4.2509E. 

External links