From HandWiki
Short description: Large biological molecule that acts as a catalyst
Ribbon diagram of glycosidase with an arrow showing the cleavage of the maltose sugar substrate into two glucose products.
The enzyme glucosidase converts the sugar maltose into two glucose sugars. Active site residues in red, maltose substrate in black, and NAD cofactor in yellow. (PDB: 1OBB​)

Enzymes (/ˈɛnzmz/) are proteins that act as biological catalysts by accelerating chemical reactions. The molecules upon which enzymes may act are called substrates, and the enzyme converts the substrates into different molecules known as products. Almost all metabolic processes in the cell need enzyme catalysis in order to occur at rates fast enough to sustain life.[1]:8.1 Metabolic pathways depend upon enzymes to catalyze individual steps. The study of enzymes is called enzymology and the field of pseudoenzyme analysis recognizes that during evolution, some enzymes have lost the ability to carry out biological catalysis, which is often reflected in their amino acid sequences and unusual 'pseudocatalytic' properties.[2][3]

Enzymes are known to catalyze more than 5,000 biochemical reaction types.[4] Other biocatalysts are catalytic RNA molecules, called ribozymes. An enzyme's specificity comes from its unique three-dimensional structure.

Like all catalysts, enzymes increase the reaction rate by lowering its activation energy. Some enzymes can make their conversion of substrate to product occur many millions of times faster. An extreme example is orotidine 5'-phosphate decarboxylase, which allows a reaction that would otherwise take millions of years to occur in milliseconds.[5][6] Chemically, enzymes are like any catalyst and are not consumed in chemical reactions, nor do they alter the equilibrium of a reaction. Enzymes differ from most other catalysts by being much more specific. Enzyme activity can be affected by other molecules: inhibitors are molecules that decrease enzyme activity, and activators are molecules that increase activity. Many therapeutic drugs and poisons are enzyme inhibitors. An enzyme's activity decreases markedly outside its optimal temperature and pH, and many enzymes are (permanently) denatured when exposed to excessive heat, losing their structure and catalytic properties.

Some enzymes are used commercially, for example, in the synthesis of antibiotics. Some household products use enzymes to speed up chemical reactions: enzymes in biological washing powders break down protein, starch or fat stains on clothes, and enzymes in meat tenderizer break down proteins into smaller molecules, making the meat easier to chew.

Etymology and history

Photograph of Eduard Buchner.
Eduard Buchner

By the late 17th and early 18th centuries, the digestion of meat by stomach secretions[7] and the conversion of starch to sugars by plant extracts and saliva were known but the mechanisms by which these occurred had not been identified.[8]

French chemist Anselme Payen was the first to discover an enzyme, diastase, in 1833.[9] A few decades later, when studying the fermentation of sugar to alcohol by yeast, Louis Pasteur concluded that this fermentation was caused by a vital force contained within the yeast cells called "ferments", which were thought to function only within living organisms. He wrote that "alcoholic fermentation is an act correlated with the life and organization of the yeast cells, not with the death or putrefaction of the cells."[10]

In 1877, German physiologist Wilhelm Kühne (1837–1900) first used the term enzyme, which comes from grc ἔνζυμον (énzymon) 'leavened, in yeast', to describe this process.[11] The word enzyme was used later to refer to nonliving substances such as pepsin, and the word ferment was used to refer to chemical activity produced by living organisms.[12]

Eduard Buchner submitted his first paper on the study of yeast extracts in 1897. In a series of experiments at the University of Berlin, he found that sugar was fermented by yeast extracts even when there were no living yeast cells in the mixture.[13] He named the enzyme that brought about the fermentation of sucrose "zymase".[14] In 1907, he received the Nobel Prize in Chemistry for "his discovery of cell-free fermentation". Following Buchner's example, enzymes are usually named according to the reaction they carry out: the suffix -ase is combined with the name of the substrate (e.g., lactase is the enzyme that cleaves lactose) or to the type of reaction (e.g., DNA polymerase forms DNA polymers).[15]

The biochemical identity of enzymes was still unknown in the early 1900s. Many scientists observed that enzymatic activity was associated with proteins, but others (such as Nobel laureate Richard Willstätter) argued that proteins were merely carriers for the true enzymes and that proteins per se were incapable of catalysis.[16] In 1926, James B. Sumner showed that the enzyme urease was a pure protein and crystallized it; he did likewise for the enzyme catalase in 1937. The conclusion that pure proteins can be enzymes was definitively demonstrated by John Howard Northrop and Wendell Meredith Stanley, who worked on the digestive enzymes pepsin (1930), trypsin and chymotrypsin. These three scientists were awarded the 1946 Nobel Prize in Chemistry.[17]

The discovery that enzymes could be crystallized eventually allowed their structures to be solved by x-ray crystallography. This was first done for lysozyme, an enzyme found in tears, saliva and egg whites that digests the coating of some bacteria; the structure was solved by a group led by David Chilton Phillips and published in 1965.[18] This high-resolution structure of lysozyme marked the beginning of the field of structural biology and the effort to understand how enzymes work at an atomic level of detail.[19]

Classification and nomenclature

Enzymes can be classified by two main criteria: either amino acid sequence similarity (and thus evolutionary relationship) or enzymatic activity.

Enzyme activity. An enzyme's name is often derived from its substrate or the chemical reaction it catalyzes, with the word ending in -ase.[1]:8.1.3 Examples are lactase, alcohol dehydrogenase and DNA polymerase. Different enzymes that catalyze the same chemical reaction are called isozymes.[1]:10.3

The International Union of Biochemistry and Molecular Biology have developed a nomenclature for enzymes, the EC numbers (for "Enzyme Commission"). Each enzyme is described by "EC" followed by a sequence of four numbers which represent the hierarchy of enzymatic activity (from very general to very specific). That is, the first number broadly classifies the enzyme based on its mechanism while the other digits add more and more specificity.[20]

The top-level classification is:

These sections are subdivided by other features such as the substrate, products, and chemical mechanism. An enzyme is fully specified by four numerical designations. For example, hexokinase (EC is a transferase (EC 2) that adds a phosphate group (EC 2.7) to a hexose sugar, a molecule containing an alcohol group (EC 2.7.1).[21]

Sequence similarity. EC categories do not reflect sequence similarity. For instance, two ligases of the same EC number that catalyze exactly the same reaction can have completely different sequences. Independent of their function, enzymes, like any other proteins, have been classified by their sequence similarity into numerous families. These families have been documented in dozens of different protein and protein family databases such as Pfam.[22]

Non-homologous isofunctional enzymes. Unrelated enzymes that have the same enzymatic activity have been called non-homologous isofunctional enzymes.[23] Horizontal gene transfer may spread these genes to unrelated species, especially bacteria where they can replace endogenous genes of the same function, leading to hon-homologous gene displacement.


A graph showing that reaction rate increases exponentially with temperature until denaturation causes it to decrease again.
Enzyme activity initially increases with temperature (Q10 coefficient) until the enzyme's structure unfolds (denaturation), leading to an optimal rate of reaction at an intermediate temperature.

Enzymes are generally globular proteins, acting alone or in larger complexes. The sequence of the amino acids specifies the structure which in turn determines the catalytic activity of the enzyme.[24] Although structure determines function, a novel enzymatic activity cannot yet be predicted from structure alone.[25] Enzyme structures unfold (denature) when heated or exposed to chemical denaturants and this disruption to the structure typically causes a loss of activity.[26] Enzyme denaturation is normally linked to temperatures above a species' normal level; as a result, enzymes from bacteria living in volcanic environments such as hot springs are prized by industrial users for their ability to function at high temperatures, allowing enzyme-catalysed reactions to be operated at a very high rate.

Enzymes are usually much larger than their substrates. Sizes range from just 62 amino acid residues, for the monomer of 4-oxalocrotonate tautomerase,[27] to over 2,500 residues in the animal fatty acid synthase.[28] Only a small portion of their structure (around 2–4 amino acids) is directly involved in catalysis: the catalytic site.[29] This catalytic site is located next to one or more binding sites where residues orient the substrates. The catalytic site and binding site together compose the enzyme's active site. The remaining majority of the enzyme structure serves to maintain the precise orientation and dynamics of the active site.[30]

In some enzymes, no amino acids are directly involved in catalysis; instead, the enzyme contains sites to bind and orient catalytic cofactors.[30] Enzyme structures may also contain allosteric sites where the binding of a small molecule causes a conformational change that increases or decreases activity.[31]

A small number of RNA-based biological catalysts called ribozymes exist, which again can act alone or in complex with proteins. The most common of these is the ribosome which is a complex of protein and catalytic RNA components.[1]:2.2


Lysozyme displayed as an opaque globular surface with a pronounced cleft which the substrate depicted as a stick diagram snuggly fits into.
Organisation of enzyme structure and lysozyme example. Binding sites in blue, catalytic site in red and peptidoglycan substrate in black. (PDB: 9LYZ​)

Substrate binding

Enzymes must bind their substrates before they can catalyse any chemical reaction. Enzymes are usually very specific as to what substrates they bind and then the chemical reaction catalysed. Specificity is achieved by binding pockets with complementary shape, charge and hydrophilic/hydrophobic characteristics to the substrates. Enzymes can therefore distinguish between very similar substrate molecules to be chemoselective, regioselective and stereospecific.[32]

Some of the enzymes showing the highest specificity and accuracy are involved in the copying and expression of the genome. Some of these enzymes have "proof-reading" mechanisms. Here, an enzyme such as DNA polymerase catalyzes a reaction in a first step and then checks that the product is correct in a second step.[33] This two-step process results in average error rates of less than 1 error in 100 million reactions in high-fidelity mammalian polymerases.[1]:5.3.1 Similar proofreading mechanisms are also found in RNA polymerase,[34] aminoacyl tRNA synthetases[35] and ribosomes.[36]

Conversely, some enzymes display enzyme promiscuity, having broad specificity and acting on a range of different physiologically relevant substrates. Many enzymes possess small side activities which arose fortuitously (i.e. neutrally), which may be the starting point for the evolutionary selection of a new function.[37][38]

Hexokinase displayed as an opaque surface with a pronounced open binding cleft next to unbound substrate (top) and the same enzyme with more closed cleft that surrounds the bound substrate (bottom)
Enzyme changes shape by induced fit upon substrate binding to form enzyme-substrate complex. Hexokinase has a large induced fit motion that closes over the substrates adenosine triphosphate and xylose. Binding sites in blue, substrates in black and Mg2+ cofactor in yellow. (PDB: 2E2N​, 2E2Q​)

"Lock and key" model

To explain the observed specificity of enzymes, in 1894 Emil Fischer proposed that both the enzyme and the substrate possess specific complementary geometric shapes that fit exactly into one another.[39] This is often referred to as "the lock and key" model.[1]:8.3.2 This early model explains enzyme specificity, but fails to explain the stabilization of the transition state that enzymes achieve.[40]

Induced fit model

In 1958, Daniel Koshland suggested a modification to the lock and key model: since enzymes are rather flexible structures, the active site is continuously reshaped by interactions with the substrate as the substrate interacts with the enzyme.[41] As a result, the substrate does not simply bind to a rigid active site; the amino acid side-chains that make up the active site are molded into the precise positions that enable the enzyme to perform its catalytic function. In some cases, such as glycosidases, the substrate molecule also changes shape slightly as it enters the active site.[42] The active site continues to change until the substrate is completely bound, at which point the final shape and charge distribution is determined.[43] Induced fit may enhance the fidelity of molecular recognition in the presence of competition and noise via the conformational proofreading mechanism.[44]


Enzymes can accelerate reactions in several ways, all of which lower the activation energy (ΔG, Gibbs free energy)[45]

  1. By stabilizing the transition state:
    • Creating an environment with a charge distribution complementary to that of the transition state to lower its energy[46]
  2. By providing an alternative reaction pathway:
    • Temporarily reacting with the substrate, forming a covalent intermediate to provide a lower energy transition state[47]
  3. By destabilising the substrate ground state:
    • Distorting bound substrate(s) into their transition state form to reduce the energy required to reach the transition state[48]
    • By orienting the substrates into a productive arrangement to reduce the reaction entropy change[49] (the contribution of this mechanism to catalysis is relatively small)[50]

Enzymes may use several of these mechanisms simultaneously. For example, proteases such as trypsin perform covalent catalysis using a catalytic triad, stabilise charge build-up on the transition states using an oxyanion hole, complete hydrolysis using an oriented water substrate.[51]


Enzymes are not rigid, static structures; instead they have complex internal dynamic motions – that is, movements of parts of the enzyme's structure such as individual amino acid residues, groups of residues forming a protein loop or unit of secondary structure, or even an entire protein domain. These motions give rise to a conformational ensemble of slightly different structures that interconvert with one another at equilibrium. Different states within this ensemble may be associated with different aspects of an enzyme's function. For example, different conformations of the enzyme dihydrofolate reductase are associated with the substrate binding, catalysis, cofactor release, and product release steps of the catalytic cycle,[52] consistent with catalytic resonance theory.

Substrate presentation

Substrate presentation is a process where the enzyme is sequestered away from its substrate. Enzymes can be sequestered to the plasma membrane away from a substrate in the nucleus or cytosol. Or within the membrane, an enzyme can be sequestered into lipid rafts away from its substrate in the disordered region. When the enzyme is released it mixes with its substrate. Alternatively, the enzyme can be sequestered near its substrate to activate the enzyme. For example, the enzyme can be soluble and upon activation bind to a lipid in the plasma membrane and then act upon molecules in the plasma membrane.

Allosteric modulation

Main page: Biology:Allosteric regulation

Allosteric sites are pockets on the enzyme, distinct from the active site, that bind to molecules in the cellular environment. These molecules then cause a change in the conformation or dynamics of the enzyme that is transduced to the active site and thus affects the reaction rate of the enzyme.[53] In this way, allosteric interactions can either inhibit or activate enzymes. Allosteric interactions with metabolites upstream or downstream in an enzyme's metabolic pathway cause feedback regulation, altering the activity of the enzyme according to the flux through the rest of the pathway.[54]


Thiamine pyrophosphate displayed as an opaque globular surface with an open binding cleft where the substrate and cofactor both depicted as stick diagrams fit into.
Chemical structure for thiamine pyrophosphate and protein structure of transketolase. Thiamine pyrophosphate cofactor in yellow and xylulose 5-phosphate substrate in black. (PDB: 4KXV​)
Main page: Biology:Cofactor (biochemistry)

Some enzymes do not need additional components to show full activity. Others require non-protein molecules called cofactors to be bound for activity.[55] Cofactors can be either inorganic (e.g., metal ions and iron–sulfur clusters) or organic compounds (e.g., flavin and heme). These cofactors serve many purposes; for instance, metal ions can help in stabilizing nucleophilic species within the active site.[56] Organic cofactors can be either coenzymes, which are released from the enzyme's active site during the reaction, or prosthetic groups, which are tightly bound to an enzyme. Organic prosthetic groups can be covalently bound (e.g., biotin in enzymes such as pyruvate carboxylase).[57]

An example of an enzyme that contains a cofactor is carbonic anhydrase, which uses a zinc cofactor bound as part of its active site.[58] These tightly bound ions or molecules are usually found in the active site and are involved in catalysis.[1]:8.1.1 For example, flavin and heme cofactors are often involved in redox reactions.[1]:17

Enzymes that require a cofactor but do not have one bound are called apoenzymes or apoproteins. An enzyme together with the cofactor(s) required for activity is called a holoenzyme (or haloenzyme). The term holoenzyme can also be applied to enzymes that contain multiple protein subunits, such as the DNA polymerases; here the holoenzyme is the complete complex containing all the subunits needed for activity.[1]:8.1.1


Coenzymes are small organic molecules that can be loosely or tightly bound to an enzyme. Coenzymes transport chemical groups from one enzyme to another.[59] Examples include NADH, NADPH and adenosine triphosphate (ATP). Some coenzymes, such as flavin mononucleotide (FMN), flavin adenine dinucleotide (FAD), thiamine pyrophosphate (TPP), and tetrahydrofolate (THF), are derived from vitamins. These coenzymes cannot be synthesized by the body de novo and closely related compounds (vitamins) must be acquired from the diet. The chemical groups carried include:

Since coenzymes are chemically changed as a consequence of enzyme action, it is useful to consider coenzymes to be a special class of substrates, or second substrates, which are common to many different enzymes. For example, about 1000 enzymes are known to use the coenzyme NADH.[60]

Coenzymes are usually continuously regenerated and their concentrations maintained at a steady level inside the cell. For example, NADPH is regenerated through the pentose phosphate pathway and S-adenosylmethionine by methionine adenosyltransferase. This continuous regeneration means that small amounts of coenzymes can be used very intensively. For example, the human body turns over its own weight in ATP each day.[61]


A two dimensional plot of reaction coordinate (x-axis) vs. energy (y-axis) for catalyzed and uncatalyzed reactions. The energy of the system steadily increases from reactants (x = 0) until a maximum is reached at the transition state (x = 0.5), and steadily decreases to the products (x = 1). However, in an enzyme catalysed reaction, binding generates an enzyme-substrate complex (with slightly reduced energy) then increases up to a transition state with a smaller maximum than the uncatalysed reaction.
The energies of the stages of a chemical reaction. Uncatalysed (dashed line), substrates need a lot of activation energy to reach a transition state, which then decays into lower-energy products. When enzyme catalysed (solid line), the enzyme binds the substrates (ES), then stabilizes the transition state (ES) to reduce the activation energy required to produce products (EP) which are finally released.
Main pages: Chemistry:Activation energy, Physics:Thermodynamic equilibrium, and Chemistry:Chemical equilibrium

As with all catalysts, enzymes do not alter the position of the chemical equilibrium of the reaction. In the presence of an enzyme, the reaction runs in the same direction as it would without the enzyme, just more quickly.[1]:8.2.3 For example, carbonic anhydrase catalyzes its reaction in either direction depending on the concentration of its reactants:[62]

[math]\ce{ CO2{} + H2O ->[\text{Carbonic anhydrase}] H2CO3 }[/math] (in tissues; high CO2 concentration)






[math]\ce{ CO2{} + H2O <-[\text{Carbonic anhydrase}] H2CO3 }[/math] (in lungs; low CO2 concentration)






The rate of a reaction is dependent on the activation energy needed to form the transition state which then decays into products. Enzymes increase reaction rates by lowering the energy of the transition state. First, binding forms a low energy enzyme-substrate complex (ES). Second, the enzyme stabilises the transition state such that it requires less energy to achieve compared to the uncatalyzed reaction (ES). Finally the enzyme-product complex (EP) dissociates to release the products.[1]:8.3

Enzymes can couple two or more reactions, so that a thermodynamically favorable reaction can be used to "drive" a thermodynamically unfavourable one so that the combined energy of the products is lower than the substrates. For example, the hydrolysis of ATP is often used to drive other chemical reactions.[63]


Schematic reaction diagrams for uncatalzyed (Substrate to Product) and catalyzed (Enzyme + Substrate to Enzyme/Substrate complex to Enzyme + Product)
A chemical reaction mechanism with or without enzyme catalysis. The enzyme (E) binds substrate (S) to produce product (P).
A two dimensional plot of substrate concentration (x axis) vs. reaction rate (y axis). The shape of the curve is hyperbolic. The rate of the reaction is zero at zero concentration of substrate and the rate asymptotically reaches a maximum at high substrate concentration.
Saturation curve for an enzyme reaction showing the relation between the substrate concentration and reaction rate.
Main page: Chemistry:Enzyme kinetics

Enzyme kinetics is the investigation of how enzymes bind substrates and turn them into products.[64] The rate data used in kinetic analyses are commonly obtained from enzyme assays. In 1913 Leonor Michaelis and Maud Leonora Menten proposed a quantitative theory of enzyme kinetics, which is referred to as Michaelis–Menten kinetics.[65] The major contribution of Michaelis and Menten was to think of enzyme reactions in two stages. In the first, the substrate binds reversibly to the enzyme, forming the enzyme-substrate complex. This is sometimes called the Michaelis–Menten complex in their honor. The enzyme then catalyzes the chemical step in the reaction and releases the product. This work was further developed by G. E. Briggs and J. B. S. Haldane, who derived kinetic equations that are still widely used today.[66]

Enzyme rates depend on solution conditions and substrate concentration. To find the maximum speed of an enzymatic reaction, the substrate concentration is increased until a constant rate of product formation is seen. This is shown in the saturation curve on the right. Saturation happens because, as substrate concentration increases, more and more of the free enzyme is converted into the substrate-bound ES complex. At the maximum reaction rate (Vmax) of the enzyme, all the enzyme active sites are bound to substrate, and the amount of ES complex is the same as the total amount of enzyme.[1]:8.4

Vmax is only one of several important kinetic parameters. The amount of substrate needed to achieve a given rate of reaction is also important. This is given by the Michaelis–Menten constant (Km), which is the substrate concentration required for an enzyme to reach one-half its maximum reaction rate; generally, each enzyme has a characteristic KM for a given substrate. Another useful constant is kcat, also called the turnover number, which is the number of substrate molecules handled by one active site per second.[1]:8.4

The efficiency of an enzyme can be expressed in terms of kcat/Km. This is also called the specificity constant and incorporates the rate constants for all steps in the reaction up to and including the first irreversible step. Because the specificity constant reflects both affinity and catalytic ability, it is useful for comparing different enzymes against each other, or the same enzyme with different substrates. The theoretical maximum for the specificity constant is called the diffusion limit and is about 108 to 109 (M−1 s−1). At this point every collision of the enzyme with its substrate will result in catalysis, and the rate of product formation is not limited by the reaction rate but by the diffusion rate. Enzymes with this property are called catalytically perfect or kinetically perfect. Example of such enzymes are triose-phosphate isomerase, carbonic anhydrase, acetylcholinesterase, catalase, fumarase, β-lactamase, and superoxide dismutase.[1]:8.4.2 The turnover of such enzymes can reach several million reactions per second.[1]:9.2 But most enzymes are far from perfect: the average values of [math]\displaystyle{ k_{\rm cat}/K_{\rm m} }[/math] and [math]\displaystyle{ k_{\rm cat} }[/math] are about [math]\displaystyle{ 10^5 {\rm s}^{-1}{\rm M}^{-1} }[/math] and [math]\displaystyle{ 10 {\rm s}^{-1} }[/math], respectively.[67]

Michaelis–Menten kinetics relies on the law of mass action, which is derived from the assumptions of free diffusion and thermodynamically driven random collision. Many biochemical or cellular processes deviate significantly from these conditions, because of macromolecular crowding and constrained molecular movement.[68] More recent, complex extensions of the model attempt to correct for these effects.[69]


Two dimensional representations of the chemical structure of folic acid and methotrexate highlighting the differences between these two substances (amidation of pyrimidone and methylation of secondary amine).
The coenzyme folic acid (left) and the anti-cancer drug methotrexate (right) are very similar in structure (differences show in green). As a result, methotrexate is a competitive inhibitor of many enzymes that use folates.
Main page: Biology:Enzyme inhibitor

Enzyme reaction rates can be decreased by various types of enzyme inhibitors.[70]:73–74

Types of inhibition


A competitive inhibitor and substrate cannot bind to the enzyme at the same time.[71] Often competitive inhibitors strongly resemble the real substrate of the enzyme. For example, the drug methotrexate is a competitive inhibitor of the enzyme dihydrofolate reductase, which catalyzes the reduction of dihydrofolate to tetrahydrofolate.[72] The similarity between the structures of dihydrofolate and this drug are shown in the accompanying figure. This type of inhibition can be overcome with high substrate concentration. In some cases, the inhibitor can bind to a site other than the binding-site of the usual substrate and exert an allosteric effect to change the shape of the usual binding-site.[73]


A non-competitive inhibitor binds to a site other than where the substrate binds. The substrate still binds with its usual affinity and hence Km remains the same. However the inhibitor reduces the catalytic efficiency of the enzyme so that Vmax is reduced. In contrast to competitive inhibition, non-competitive inhibition cannot be overcome with high substrate concentration.[70]:76–78


An uncompetitive inhibitor cannot bind to the free enzyme, only to the enzyme-substrate complex; hence, these types of inhibitors are most effective at high substrate concentration. In the presence of the inhibitor, the enzyme-substrate complex is inactive.[70]:78 This type of inhibition is rare.[74]


A mixed inhibitor binds to an allosteric site and the binding of the substrate and the inhibitor affect each other. The enzyme's function is reduced but not eliminated when bound to the inhibitor. This type of inhibitor does not follow the Michaelis–Menten equation.[70]:76–78


An irreversible inhibitor permanently inactivates the enzyme, usually by forming a covalent bond to the protein.[75] Penicillin[76] and aspirin[77] are common drugs that act in this manner.

Functions of inhibitors

In many organisms, inhibitors may act as part of a feedback mechanism. If an enzyme produces too much of one substance in the organism, that substance may act as an inhibitor for the enzyme at the beginning of the pathway that produces it, causing production of the substance to slow down or stop when there is sufficient amount. This is a form of negative feedback. Major metabolic pathways such as the citric acid cycle make use of this mechanism.[1]:17.2.2

Since inhibitors modulate the function of enzymes they are often used as drugs. Many such drugs are reversible competitive inhibitors that resemble the enzyme's native substrate, similar to methotrexate above; other well-known examples include statins used to treat high cholesterol,[78] and protease inhibitors used to treat retroviral infections such as HIV.[79] A common example of an irreversible inhibitor that is used as a drug is aspirin, which inhibits the COX-1 and COX-2 enzymes that produce the inflammation messenger prostaglandin.[77] Other enzyme inhibitors are poisons. For example, the poison cyanide is an irreversible enzyme inhibitor that combines with the copper and iron in the active site of the enzyme cytochrome c oxidase and blocks cellular respiration.[80]

Factors affecting enzyme activity

As enzymes are made up of proteins, their actions are sensitive to change in many physio chemical factors such as pH, temperature, substrate concentration, etc.

The following table shows pH optima for various enzymes.[81]

Enzyme Optimum pH pH description
Pepsin 1.5–1.6 Highly acidic
Invertase 4.5 Acidic
Lipase (stomach) 4.0–5.0 Acidic
Lipase (castor oil) 4.7 Acidic
Lipase (pancreas) 8.0 Alkaline
Amylase (malt) 4.6–5.2 Acidic
Amylase (pancreas) 6.7–7.0 Acidic-neutral
Cellobiase 5.0 Acidic
Maltase 6.1–6.8 Acidic
Sucrase 6.2 Acidic
Catalase 7.0 Neutral
Urease 7.0 Neutral
Cholinesterase 7.0 Neutral
Ribonuclease 7.0–7.5 Neutral
Fumarase 7.8 Alkaline
Trypsin 7.8–8.7 Alkaline
Adenosine triphosphate 9.0 Alkaline
Arginase 10.0 Highly alkaline

Biological function

Enzymes serve a wide variety of functions inside living organisms. They are indispensable for signal transduction and cell regulation, often via kinases and phosphatases.[82] They also generate movement, with myosin hydrolyzing adenosine triphosphate (ATP) to generate muscle contraction, and also transport cargo around the cell as part of the cytoskeleton.[83] Other ATPases in the cell membrane are ion pumps involved in active transport. Enzymes are also involved in more exotic functions, such as luciferase generating light in fireflies.[84] Viruses can also contain enzymes for infecting cells, such as the HIV integrase and reverse transcriptase, or for viral release from cells, like the influenza virus neuraminidase.[85]

An important function of enzymes is in the digestive systems of animals. Enzymes such as amylases and proteases break down large molecules (starch or proteins, respectively) into smaller ones, so they can be absorbed by the intestines. Starch molecules, for example, are too large to be absorbed from the intestine, but enzymes hydrolyze the starch chains into smaller molecules such as maltose and eventually glucose, which can then be absorbed. Different enzymes digest different food substances. In ruminants, which have herbivorous diets, microorganisms in the gut produce another enzyme, cellulase, to break down the cellulose cell walls of plant fiber.[86]


Schematic diagram of the glycolytic metabolic pathway starting with glucose and ending with pyruvate via several intermediate chemicals. Each step in the pathway is catalyzed by a unique enzyme.
The metabolic pathway of glycolysis releases energy by converting glucose to pyruvate via a series of intermediate metabolites. Each chemical modification (red box) is performed by a different enzyme.

Several enzymes can work together in a specific order, creating metabolic pathways.[1]:30.1 In a metabolic pathway, one enzyme takes the product of another enzyme as a substrate. After the catalytic reaction, the product is then passed on to another enzyme. Sometimes more than one enzyme can catalyze the same reaction in parallel; this can allow more complex regulation: with, for example, a low constant activity provided by one enzyme but an inducible high activity from a second enzyme.[87]

Enzymes determine what steps occur in these pathways. Without enzymes, metabolism would neither progress through the same steps and could not be regulated to serve the needs of the cell. Most central metabolic pathways are regulated at a few key steps, typically through enzymes whose activity involves the hydrolysis of ATP. Because this reaction releases so much energy, other reactions that are thermodynamically unfavorable can be coupled to ATP hydrolysis, driving the overall series of linked metabolic reactions.[1]:30.1

Control of activity

There are five main ways that enzyme activity is controlled in the cell.[1]:30.1.1


Enzymes can be either activated or inhibited by other molecules. For example, the end product(s) of a metabolic pathway are often inhibitors for one of the first enzymes of the pathway (usually the first irreversible step, called committed step), thus regulating the amount of end product made by the pathways. Such a regulatory mechanism is called a negative feedback mechanism, because the amount of the end product produced is regulated by its own concentration.[88]:141–48 Negative feedback mechanism can effectively adjust the rate of synthesis of intermediate metabolites according to the demands of the cells. This helps with effective allocations of materials and energy economy, and it prevents the excess manufacture of end products. Like other homeostatic devices, the control of enzymatic action helps to maintain a stable internal environment in living organisms.[88]:141

Post-translational modification

Examples of post-translational modification include phosphorylation, myristoylation and glycosylation.[88]:149–69 For example, in the response to insulin, the phosphorylation of multiple enzymes, including glycogen synthase, helps control the synthesis or degradation of glycogen and allows the cell to respond to changes in blood sugar.[89] Another example of post-translational modification is the cleavage of the polypeptide chain. Chymotrypsin, a digestive protease, is produced in inactive form as chymotrypsinogen in the pancreas and transported in this form to the stomach where it is activated. This stops the enzyme from digesting the pancreas or other tissues before it enters the gut. This type of inactive precursor to an enzyme is known as a zymogen[88]:149–53 or proenzyme.


Enzyme production (transcription and translation of enzyme genes) can be enhanced or diminished by a cell in response to changes in the cell's environment. This form of gene regulation is called enzyme induction. For example, bacteria may become resistant to antibiotics such as penicillin because enzymes called beta-lactamases are induced that hydrolyse the crucial beta-lactam ring within the penicillin molecule.[90] Another example comes from enzymes in the liver called cytochrome P450 oxidases, which are important in drug metabolism. Induction or inhibition of these enzymes can cause drug interactions.[91] Enzyme levels can also be regulated by changing the rate of enzyme degradation.[1]:30.1.1 The opposite of enzyme induction is enzyme repression.

Subcellular distribution

Enzymes can be compartmentalized, with different metabolic pathways occurring in different cellular compartments. For example, fatty acids are synthesized by one set of enzymes in the cytosol, endoplasmic reticulum and Golgi and used by a different set of enzymes as a source of energy in the mitochondrion, through β-oxidation.[92] In addition, trafficking of the enzyme to different compartments may change the degree of protonation (e.g., the neutral cytoplasm and the acidic lysosome) or oxidative state (e.g., oxidizing periplasm or reducing cytoplasm) which in turn affects enzyme activity.[93] In contrast to partitioning into membrane bound organelles, enzyme subcellular localisation may also be altered through polymerisation of enzymes into macromolecular cytoplasmic filaments.[94][95]

Organ specialization

In multicellular eukaryotes, cells in different organs and tissues have different patterns of gene expression and therefore have different sets of enzymes (known as isozymes) available for metabolic reactions. This provides a mechanism for regulating the overall metabolism of the organism. For example, hexokinase, the first enzyme in the glycolysis pathway, has a specialized form called glucokinase expressed in the liver and pancreas that has a lower affinity for glucose yet is more sensitive to glucose concentration.[96] This enzyme is involved in sensing blood sugar and regulating insulin production.[97]

Involvement in disease

Ribbon diagram of phenylalanine hydroxylase with bound cofactor, coenzyme and substrate
In phenylalanine hydroxylase over 300 different mutations throughout the structure cause phenylketonuria. Phenylalanine substrate and tetrahydrobiopterin coenzyme in black, and Fe2+ cofactor in yellow. (PDB: 1KW0​)
Hereditary defects in enzymes are generally inherited in an autosomal fashion because there are more non-X chromosomes than X-chromosomes, and a recessive fashion because the enzymes from the unaffected genes are generally sufficient to prevent symptoms in carriers.

Since the tight control of enzyme activity is essential for homeostasis, any malfunction (mutation, overproduction, underproduction or deletion) of a single critical enzyme can lead to a genetic disease. The malfunction of just one type of enzyme out of the thousands of types present in the human body can be fatal. An example of a fatal genetic disease due to enzyme insufficiency is Tay–Sachs disease, in which patients lack the enzyme hexosaminidase.[98][99]

One example of enzyme deficiency is the most common type of phenylketonuria. Many different single amino acid mutations in the enzyme phenylalanine hydroxylase, which catalyzes the first step in the degradation of phenylalanine, result in build-up of phenylalanine and related products. Some mutations are in the active site, directly disrupting binding and catalysis, but many are far from the active site and reduce activity by destabilising the protein structure, or affecting correct oligomerisation.[100][101] This can lead to intellectual disability if the disease is untreated.[102] Another example is pseudocholinesterase deficiency, in which the body's ability to break down choline ester drugs is impaired.[103] Oral administration of enzymes can be used to treat some functional enzyme deficiencies, such as pancreatic insufficiency[104] and lactose intolerance.[105]

Another way enzyme malfunctions can cause disease comes from germline mutations in genes coding for DNA repair enzymes. Defects in these enzymes cause cancer because cells are less able to repair mutations in their genomes. This causes a slow accumulation of mutations and results in the development of cancers. An example of such a hereditary cancer syndrome is xeroderma pigmentosum, which causes the development of skin cancers in response to even minimal exposure to ultraviolet light.[106][107]


Similar to any other protein, enzymes change over time through mutations and sequence divergence. Given their central role in metabolism, enzyme evolution plays a critical role in adaptation. A key question is therefore whether and how enzymes can change their enzymatic activities alongside. It is generally accepted that many new enzyme activities have evolved through gene duplication and mutation of the duplicate copies although evolution can also happen without duplication. One example of an enzyme that has changed its activity is the ancestor of methionyl aminopeptidase (MAP) and creatine amidinohydrolase (creatinase) which are clearly homologous but catalyze very different reactions (MAP removes the amino-terminal methionine in new proteins while creatinase hydrolyses creatine to sarcosine and urea). In addition, MAP is metal-ion dependent while creatinase is not, hence this property was also lost over time.[108] Small changes of enzymatic activity are extremely common among enzymes. In particular, substrate binding specificity (see above) can easily and quickly change with single amino acid changes in their substrate binding pockets. This is frequently seen in the main enzyme classes such as kinases.[109]

Artificial (in vitro) evolution is now commonly used to modify enzyme activity or specificity for industrial applications (see below).

Industrial applications

Enzymes are used in the chemical industry and other industrial applications when extremely specific catalysts are required. Enzymes in general are limited in the number of reactions they have evolved to catalyze and also by their lack of stability in organic solvents and at high temperatures. As a consequence, protein engineering is an active area of research and involves attempts to create new enzymes with novel properties, either through rational design or in vitro evolution.[110][111] These efforts have begun to be successful, and a few enzymes have now been designed "from scratch" to catalyze reactions that do not occur in nature.[112]

Application Enzymes used Uses
Biofuel industry Cellulases Break down cellulose into sugars that can be fermented to produce cellulosic ethanol.[113]
Ligninases Pretreatment of biomass for biofuel production.[113]
Biological detergent Proteases, amylases, lipases Remove protein, starch, and fat or oil stains from laundry and dishware.[114]
Mannanases Remove food stains from the common food additive guar gum.[114]
Brewing industry Amylase, glucanases, proteases Split polysaccharides and proteins in the malt.[115]:150–9
Betaglucanases Improve the wort and beer filtration characteristics.[115]:545
Amyloglucosidase and pullulanases Make low-calorie beer and adjust fermentability.[115]:575
Acetolactate decarboxylase (ALDC) Increase fermentation efficiency by reducing diacetyl formation.[116]
Culinary uses Papain Tenderize meat for cooking.[117]
Dairy industry Rennin Hydrolyze protein in the manufacture of cheese.[118]
Lipases Produce Camembert cheese and blue cheeses such as Roquefort.[119]
Food processing Amylases Produce sugars from starch, such as in making high-fructose corn syrup.[120]
Proteases Lower the protein level of flour, as in biscuit-making.[121]
Trypsin Manufacture hypoallergenic baby foods.[121]
Cellulases, pectinases Clarify fruit juices.[122]
Molecular biology Nucleases, DNA ligase and polymerases Use restriction digestion and the polymerase chain reaction to create recombinant DNA.[1]:6.2
Paper industry Xylanases, hemicellulases and lignin peroxidases Remove lignin from kraft pulp.[123]
Personal care Proteases Remove proteins on contact lenses to prevent infections.[124]
Starch industry Amylases Convert starch into glucose and various syrups.[125]

See also

Enzyme databases


  1. 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 1.20 Biochemistry (5th ed.). San Francisco: W.H. Freeman. 2002. ISBN 0-7167-4955-6. open access
  2. "Bio-Zombie: the rise of pseudoenzymes in biology". Biochemical Society Transactions 45 (2): 537–544. April 2017. doi:10.1042/bst20160400. PMID 28408493. 
  3. "A robust methodology to subclassify pseudokinases based on their nucleotide-binding properties". The Biochemical Journal 457 (2): 323–334. January 2014. doi:10.1042/BJ20131174. PMID 24107129. 
  4. "BRENDA in 2013: integrated reactions, kinetic data, enzyme function data, improved disease classification: new options and contents in BRENDA". Nucleic Acids Research 41 (Database issue): D764–D772. January 2013. doi:10.1093/nar/gks1049. PMID 23203881. 
  5. "A proficient enzyme". Science 267 (5194): 90–93. January 1995. doi:10.1126/science.7809611. PMID 7809611. Bibcode1995Sci...267...90R. 
  6. "OMP decarboxylase--An enigma persists". Bioorganic Chemistry 35 (6): 465–469. December 2007. doi:10.1016/j.bioorg.2007.07.004. PMID 17889251. 
  7. "Observations sur la digestion des oiseaux". Histoire de l'Académie Royale des Sciences 1752: 266, 461. 1752. 
  8. A History of Science: in Five Volumes. Volume IV: Modern Development of the Chemical and Biological Sciences. Harper and Brothers. 1904. 
  9. "Mémoire sur la diastase, les principaux produits de ses réactions et leurs applications aux arts industriels" (in fr). Annales de chimie et de physique. 2nd 53: 73–92. 1833. 
  10. "Louis Pasteur (1822–1895)--chance and the prepared mind". Trends in Biotechnology 13 (12): 511–515. December 1995. doi:10.1016/S0167-7799(00)89014-9. PMID 8595136. 
  11. Kühne coined the word "enzyme" in: "Über das Verhalten verschiedener organisirter und sog. ungeformter Fermente" (in de). Verhandlungen des Naturhistorisch-medicinischen Vereins zu Heidelberg. new series 1 (3): 190–193. 1877.  Relevant passage on page 190: "Um Missverständnissen vorzubeugen und lästige Umschreibungen zu vermeiden schlägt Vortragender vor, die ungeformten oder nicht organisirten Fermente, deren Wirkung ohne Anwesenheit von Organismen und ausserhalb derselben erfolgen kann, als Enzyme zu bezeichnen." (Translation: In order to obviate misunderstandings and avoid cumbersome periphrases, [the author, a university lecturer] suggests designating as "enzymes" the unformed or not organized ferments, whose action can occur without the presence of organisms and outside of the same.)
  12. "Enzymes". The Oxford Companion to the History of Modern Science. Oxford: Oxford University Press. 2003. p. 270. ISBN 9780199743766. 
  13. "Eduard Buchner". Nobel Laureate Biography. 
  14. "Eduard Buchner – Nobel Lecture: Cell-Free Fermentation". 1907. 
  15. The naming of enzymes by adding the suffix "-ase" to the substrate on which the enzyme acts, has been traced to French scientist Émile Duclaux (1840–1904), who intended to honor the discoverers of diastase – the first enzyme to be isolated – by introducing this practice in his book Duclaux E (1899) (in fr). Traité de microbiologie: Diastases, toxines et venins. Paris, France: Masson and Co.  See Chapter 1, especially page 9.
  16. "Faraday lecture. Problems and methods in enzyme research". Journal of the Chemical Society (Resumed): 1359–1381. 1927. doi:10.1039/JR9270001359.  quoted in "So do we understand how enzymes work?". Structure 8 (4): R77–R81. April 2000. doi:10.1016/S0969-2126(00)00125-8. PMID 10801479. 
  17. "Nobel Prizes and Laureates: The Nobel Prize in Chemistry 1946". 
  18. "Structure of hen egg-white lysozyme. A three-dimensional Fourier synthesis at 2 Angstrom resolution". Nature 206 (4986): 757–761. May 1965. doi:10.1038/206757a0. PMID 5891407. Bibcode1965Natur.206..757B. 
  19. "David Phillips and the origin of structural enzymology". Trends in Biochemical Sciences 24 (7): 287–289. July 1999. doi:10.1016/S0968-0004(99)01423-1. PMID 10390620. 
  20. "Recommendations of the Nomenclature Committee of the International Union of Biochemistry and Molecular Biology on the Nomenclature and Classification of Enzymes by the Reactions they Catalyse". 
  21. Nomenclature Committee. "EC". International Union of Biochemistry and Molecular Biology (NC-IUBMB). School of Biological and Chemical Sciences, Queen Mary, University of London. 
  22. "Protein Family Databases" (in en). eLS. Chichester, UK: John Wiley & Sons, Ltd. 2007-09-28. pp. a0003058.pub2. doi:10.1002/9780470015902.a0003058.pub2. ISBN 978-0-470-01617-6. 
  23. "Non-homologous isofunctional enzymes: a systematic analysis of alternative solutions in enzyme evolution". Biology Direct 5 (1): 31. April 2010. doi:10.1186/1745-6150-5-31. PMID 20433725. 
  24. "Principles that govern the folding of protein chains". Science 181 (4096): 223–230. July 1973. doi:10.1126/science.181.4096.223. PMID 4124164. Bibcode1973Sci...181..223A. 
  25. "Enzyme function discovery". Structure 16 (11): 1599–1600. November 2008. doi:10.1016/j.str.2008.10.001. PMID 19000810. 
  26. "Chapter 1: From sequence to structure". Protein structure and function. London: New Science. 2003. p. 27. ISBN 978-1405119221. 
  27. "4-Oxalocrotonate tautomerase, an enzyme composed of 62 amino acid residues per monomer". The Journal of Biological Chemistry 267 (25): 17716–17721. September 1992. doi:10.1016/S0021-9258(19)37101-7. PMID 1339435. 
  28. "The animal fatty acid synthase: one gene, one polypeptide, seven enzymes". FASEB Journal 8 (15): 1248–1259. December 1994. doi:10.1096/fasebj.8.15.8001737. PMID 8001737. 
  29. "The Catalytic Site Atlas". The European Bioinformatics Institute. 
  30. 30.0 30.1 Suzuki H (2015). "Chapter 7: Active Site Structure". How Enzymes Work: From Structure to Function. Boca Raton, FL: CRC Press. pp. 117–140. ISBN 978-981-4463-92-8. 
  31. Krauss G (2003). "The Regulations of Enzyme Activity". Biochemistry of Signal Transduction and Regulation (3rd ed.). Weinheim: Wiley-VCH. pp. 89–114. ISBN 9783527605767. 
  32. "Enantioselective biocatalysis optimized by directed evolution". Current Opinion in Biotechnology 15 (4): 305–313. August 2004. doi:10.1016/j.copbio.2004.06.007. PMID 15358000. 
  33. "The 3' 5' exonucleases". Nature Reviews. Molecular Cell Biology 3 (5): 364–376. May 2002. doi:10.1038/nrm804. PMID 11988770. 
  34. "Transcript-assisted transcriptional proofreading". Science 313 (5786): 518–520. July 2006. doi:10.1126/science.1127422. PMID 16873663. Bibcode2006Sci...313..518Z. 
  35. "Aminoacyl-tRNA synthesis". Annual Review of Biochemistry 69: 617–650. 2000. doi:10.1146/annurev.biochem.69.1.617. PMID 10966471. 
  36. "Fidelity of aminoacyl-tRNA selection on the ribosome: kinetic and structural mechanisms". Annual Review of Biochemistry 70: 415–435. 2001. doi:10.1146/annurev.biochem.70.1.415. PMID 11395413. 
  37. "Enzyme promiscuity: a mechanistic and evolutionary perspective". Annual Review of Biochemistry 79: 471–505. 2010. doi:10.1146/annurev-biochem-030409-143718. PMID 20235827. 
  38. "Catalytic promiscuity and the evolution of new enzymatic activities". Chemistry & Biology 6 (4): R91–R105. April 1999. doi:10.1016/S1074-5521(99)80033-7. PMID 10099128. 
  39. "Einfluss der Configuration auf die Wirkung der Enzyme" (in de). Berichte der Deutschen Chemischen Gesellschaft zu Berlin 27 (3): 2985–93. 1894. doi:10.1002/cber.18940270364.  From page 2992: "Um ein Bild zu gebrauchen, will ich sagen, dass Enzym und Glucosid wie Schloss und Schlüssel zu einander passen müssen, um eine chemische Wirkung auf einander ausüben zu können." (To use an image, I will say that an enzyme and a glucoside [i.e., glucose derivative] must fit like a lock and key, in order to be able to exert a chemical effect on each other.)
  40. Cooper GM (2000). "Chapter 2.2: The Central Role of Enzymes as Biological Catalysts". The Cell: a Molecular Approach (2nd ed.). Washington (DC ): ASM Press. ISBN 0-87893-106-6. 
  41. "Application of a Theory of Enzyme Specificity to Protein Synthesis". Proceedings of the National Academy of Sciences of the United States of America 44 (2): 98–104. February 1958. doi:10.1073/pnas.44.2.98. PMID 16590179. Bibcode1958PNAS...44...98K. 
  42. "Glycosidase mechanisms". Current Opinion in Chemical Biology 6 (5): 619–629. October 2002. doi:10.1016/S1367-5931(02)00380-0. PMID 12413546. 
  43. "Chapter 6: Enzymes I, Reactions, Kinetics, and Inhibition". Concepts in Biochemistry (2nd ed.). New York, Chichester, Weinheim, Brisbane, Singapore, Toronto.: John Wiley & Sons, Inc.. 2002. pp. 137–8. ISBN 0-470-00379-0. OCLC 51720783. 
  44. "Conformational proofreading: the impact of conformational changes on the specificity of molecular recognition". PLOS ONE 2 (5): e468. May 2007. doi:10.1371/journal.pone.0000468. PMID 17520027. Bibcode2007PLoSO...2..468S. 
  45. Fersht A (1985). Enzyme Structure and Mechanism. San Francisco: W.H. Freeman. pp. 50–2. ISBN 978-0-7167-1615-0. 
  46. "Electrostatic basis for enzyme catalysis". Chemical Reviews 106 (8): 3210–3235. August 2006. doi:10.1021/cr0503106. PMID 16895325. 
  47. "Chapter 6.2: How enzymes work". Lehninger Principles of Biochemistry (6th ed.). New York, N.Y.: W.H. Freeman. 2013. p. 195. ISBN 978-1464109621. 
  48. "A perspective on enzyme catalysis". Science 301 (5637): 1196–1202. August 2003. doi:10.1126/science.1085515. PMID 12947189. Bibcode2003Sci...301.1196B. 
  49. Jencks WP (1987). Catalysis in Chemistry and Enzymology. Mineola, N.Y: Dover. ISBN 978-0-486-65460-7. 
  50. "How important are entropic contributions to enzyme catalysis?". Proceedings of the National Academy of Sciences of the United States of America 97 (22): 11899–11904. October 2000. doi:10.1073/pnas.97.22.11899. PMID 11050223. Bibcode2000PNAS...9711899V. 
  51. "The catalytic triad of serine peptidases". Cellular and Molecular Life Sciences 62 (19–20): 2161–2172. October 2005. doi:10.1007/s00018-005-5160-x. PMID 16003488. 
  52. "Protein conformational populations and functionally relevant substates". Accounts of Chemical Research 47 (1): 149–156. January 2014. doi:10.1021/ar400084s. PMID 23988159. 
  53. "Protein allostery, signal transmission and dynamics: a classification scheme of allosteric mechanisms". Molecular BioSystems 5 (3): 207–216. March 2009. doi:10.1039/b819720b. PMID 19225609. 
  54. "Allosteric mechanisms of signal transduction". Science 308 (5727): 1424–1428. June 2005. doi:10.1126/science.1108595. PMID 15933191. Bibcode2005Sci...308.1424C. 
  55. "Glossary of Terms Used in Bioinorganic Chemistry: Cofactor". International Union of Pure and Applied Chemistry. 1997. 
  56. Fundamentals of Biochemistry. Hoboken, New Jersey: John Wiley & Sons, Inc.. 2016. pp. 336. ISBN 978-1-118-91840-1. 
  57. "The enzymatic biotinylation of proteins: a post-translational modification of exceptional specificity". Trends in Biochemical Sciences 24 (9): 359–363. September 1999. doi:10.1016/s0968-0004(99)01438-3. PMID 10470036. 
  58. "Structural and kinetic characterization of active-site histidine as a proton shuttle in catalysis by human carbonic anhydrase II". Biochemistry 44 (4): 1097–1105. February 2005. doi:10.1021/bi0480279. PMID 15667203. 
  59. 59.0 59.1 Wagner AL (1975). Vitamins and Coenzymes. Krieger Pub Co. ISBN 0-88275-258-8. 
  60. "BRENDA The Comprehensive Enzyme Information System". Technische Universität Braunschweig. 
  61. "Opening and closing the metabolite gate". Proceedings of the National Academy of Sciences of the United States of America 105 (50): 19565–19566. December 2008. doi:10.1073/pnas.0810654106. PMID 19073922. Bibcode2008PNAS..10519565T. 
  62. "Chapter 9: The Pulmonary System and Exercise". Essentials of Exercise Physiology (3rd ed.). Baltimore, Maryland: Lippincott Williams & Wilkins. 2006. pp. 312–3. ISBN 978-0781749916. 
  63. Bioenergetics 3 (3rd ed.). San Diego: Academic. 2002. ISBN 0-12-518121-3. 
  64. Enzyme kinetics : principles and methods (Third, enlarged and improved ed.). Weinheim, Germany: Wiley-VCH. 2017. ISBN 9783527806461. OCLC 992976641. 
  65. "Die Kinetik der Invertinwirkung" (in de). Biochem. Z. 49: 333–369. 1913. ; "The original Michaelis constant: translation of the 1913 Michaelis-Menten paper". Biochemistry 50 (39): 8264–8269. October 2011. doi:10.1021/bi201284u. PMID 21888353. 
  66. "A Note on the Kinetics of Enzyme Action". The Biochemical Journal 19 (2): 338–339. 1925. doi:10.1042/bj0190338. PMID 16743508. 
  67. "The moderately efficient enzyme: evolutionary and physicochemical trends shaping enzyme parameters". Biochemistry 50 (21): 4402–4410. May 2011. doi:10.1021/bi2002289. PMID 21506553. 
  68. "Macromolecular crowding: obvious but underappreciated". Trends in Biochemical Sciences 26 (10): 597–604. October 2001. doi:10.1016/S0968-0004(01)01938-7. PMID 11590012. 
  69. "Fractal reaction kinetics". Science 241 (4873): 1620–1626. September 1988. doi:10.1126/science.241.4873.1620. PMID 17820893. Bibcode1988Sci...241.1620K. 
  70. 70.0 70.1 70.2 70.3 Cornish-Bowden A (2004). Fundamentals of Enzyme Kinetics (3 ed.). London: Portland Press. ISBN 1-85578-158-1. 
  71. "What is meant by 'competitive inhibition'?". Trends in Biochemical Sciences 4 (11): N272–N273. 1979. doi:10.1016/0968-0004(79)90205-6. 
  72. "The molecular perspective: methotrexate". The Oncologist 4 (4): 340–341. 1999-08-01. doi:10.1634/theoncologist.4-4-340. PMID 10476546. 
  73. "Allosteric small-molecule kinase inhibitors". Pharmacology & Therapeutics 156: 59–68. December 2015. doi:10.1016/j.pharmthera.2015.10.002. PMID 26478442. 
  74. "Why is uncompetitive inhibition so rare? A possible explanation, with implications for the design of drugs and pesticides". FEBS Letters 203 (1): 3–6. July 1986. doi:10.1016/0014-5793(86)81424-7. PMID 3720956. 
  75. "A Perspective on the Kinetics of Covalent and Irreversible Inhibition". SLAS Discovery 22 (1): 3–20. January 2017. doi:10.1177/1087057116671509. PMID 27703080. 
  76. "Bacterial resistance to beta-lactam antibiotics: compelling opportunism, compelling opportunity". Chemical Reviews 105 (2): 395–424. February 2005. doi:10.1021/cr030102i. PMID 15700950. 
  77. 77.0 77.1 "Strategies for discovering and derisking covalent, irreversible enzyme inhibitors". Future Medicinal Chemistry 2 (6): 949–964. June 2010. doi:10.4155/fmc.10.21. PMID 20640225. 
  78. "The discovery and development of HMG-CoA reductase inhibitors". Journal of Lipid Research 33 (11): 1569–1582. November 1992. doi:10.1016/S0022-2275(20)41379-3. PMID 1464741. 
  79. "Inhibitors of HIV-1 protease: a major success of structure-assisted drug design". Annual Review of Biophysics and Biomolecular Structure 27: 249–284. 1998. doi:10.1146/annurev.biophys.27.1.249. PMID 9646869. 
  80. "Infrared evidence of cyanide binding to iron and copper sites in bovine heart cytochrome c oxidase. Implications regarding oxygen reduction". The Journal of Biological Chemistry 265 (14): 7945–7958. May 1990. doi:10.1016/S0021-9258(19)39023-4. PMID 2159465. 
  81. Fundamentals of biochemistry. New Delhi: S. Chand and Co. May 1999. ISBN 8121903432. OCLC 818809626. 
  82. "Protein kinases and phosphatases: the yin and yang of protein phosphorylation and signaling". Cell 80 (2): 225–236. January 1995. doi:10.1016/0092-8674(95)90405-0. PMID 7834742. 
  83. "A millennial myosin census". Molecular Biology of the Cell 12 (4): 780–794. April 2001. doi:10.1091/mbc.12.4.780. PMID 11294886. 
  84. "Molecular biology of bacterial bioluminescence". Microbiological Reviews 55 (1): 123–142. March 1991. doi:10.1128/MMBR.55.1.123-142.1991. PMID 2030669. 
  85. "Highlights in the development of new antiviral agents". Mini Reviews in Medicinal Chemistry 2 (2): 163–175. April 2002. doi:10.2174/1389557024605474. PMID 12370077. 
  86. "Recent advances in rumen microbial ecology and metabolism: potential impact on nutrient output". Journal of Dairy Science 73 (10): 2971–2995. October 1990. doi:10.3168/jds.S0022-0302(90)78986-2. PMID 2178174. 
  87. "Cyclooxygenases: structural and functional insights". Journal of Lipid Research 50 (Suppl): S29–S34. April 2009. doi:10.1194/jlr.R800042-JLR200. PMID 18952571. 
  88. 88.0 88.1 88.2 88.3 Suzuki H (2015). "Chapter 8: Control of Enzyme Activity". How Enzymes Work: From Structure to Function. Boca Raton, FL: CRC Press. pp. 141–69. ISBN 978-981-4463-92-8. 
  89. "GSK-3: tricks of the trade for a multi-tasking kinase". Journal of Cell Science 116 (Pt 7): 1175–1186. April 2003. doi:10.1242/jcs.00384. PMID 12615961. 
  90. "Molecular basis of beta-lactamase induction in bacteria". Antimicrobial Agents and Chemotherapy 37 (2): 153–158. February 1993. doi:10.1128/aac.37.2.153. PMID 8452343. 
  91. "Chapter 3: Induction and Inhibition of Drug Metabolism". Introduction to Drug Metabolism (3 ed.). Cheltenham, UK: Nelson Thornes Publishers. 2001. pp. 87–118. ISBN 978-0748760114. 
  92. "Role of long-chain fatty acyl-CoA esters in the regulation of metabolism and in cell signalling". The Biochemical Journal 323 ( Pt 1) (Pt 1): 1–12. April 1997. doi:10.1042/bj3230001. PMID 9173866. 
  93. Suzuki H (2015). "Chapter 4: Effect of pH, Temperature, and High Pressure on Enzymatic Activity". How Enzymes Work: From Structure to Function. Boca Raton, FL: CRC Press. pp. 53–74. ISBN 978-981-4463-92-8. 
  94. "Identification of novel filament-forming proteins in Saccharomyces cerevisiae and Drosophila melanogaster". The Journal of Cell Biology 190 (4): 541–551. August 2010. doi:10.1083/jcb.201003001. PMID 20713603. 
  95. "Metabolic regulation via enzyme filamentation". Critical Reviews in Biochemistry and Molecular Biology 51 (4): 282–293. 2015. doi:10.3109/10409238.2016.1172555. PMID 27098510. 
  96. "Structural basis for allosteric regulation of the monomeric allosteric enzyme human glucokinase". Structure 12 (3): 429–438. March 2004. doi:10.1016/j.str.2004.02.005. PMID 15016359. 
  97. "Familial hyperglycemia due to mutations in glucokinase. Definition of a subtype of diabetes mellitus". The New England Journal of Medicine 328 (10): 697–702. March 1993. doi:10.1056/NEJM199303113281005. PMID 8433729. 
  98. "Tay-Sachs disease: generalized absence of a beta-D-N-acetylhexosaminidase component". Science 165 (3894): 698–700. August 1969. doi:10.1126/science.165.3894.698. PMID 5793973. Bibcode1969Sci...165..698O. 
  99. "Learning About Tay–Sachs Disease". U.S. National Human Genome Research Institute. 
  100. "The structural basis of phenylketonuria". Molecular Genetics and Metabolism 68 (2): 103–125. October 1999. doi:10.1006/mgme.1999.2922. PMID 10527663. 
  101. "Structural Insight into the Aromatic Amino Acid Hydroxylases and Their Disease-Related Mutant Forms". Chemical Reviews 99 (8): 2137–2160. August 1999. doi:10.1021/cr980450y. PMID 11849022. 
  102. "Phenylketonuria". Genes and Disease [Internet]. Bethesda (MD): National Center for Biotechnology Information (US). 1998–2015. 
  103. "Pseudocholinesterase deficiency". U.S. National Library of Medicine. 
  104. "Enzyme replacement therapy for pancreatic insufficiency: present and future". Clinical and Experimental Gastroenterology 4: 55–73. 2011. doi:10.2147/CEG.S17634. PMID 21753892. 
  105. "Lactose malabsorption and intolerance: pathogenesis, diagnosis and treatment". United European Gastroenterology Journal 1 (3): 151–159. June 2013. doi:10.1177/2050640613484463. PMID 24917953. 
  106. "Defective repair replication of DNA in xeroderma pigmentosum". Nature 218 (5142): 652–656. May 1968. doi:10.1038/218652a0. PMID 5655953. Bibcode1968Natur.218..652C. 
  107. Andrews' Diseases of the Skin: Clinical Dermatology (11th ed.). London: Saunders/ Elsevier. 2011. p. 567. ISBN 978-1437703146. 
  108. "Can homologous proteins evolve different enzymatic activities?". Trends in Biochemical Sciences 18 (11): 403–405. November 1993. doi:10.1016/0968-0004(93)90132-7. PMID 8291080. 
  109. "Evolution, dynamics and dysregulation of kinase signalling". Current Opinion in Structural Biology 48: 133–140. February 2018. doi:10.1016/ PMID 29316484. 
  110. "Rational design of thermally stable proteins: relevance to bionanotechnology". Journal of Nanoscience and Nanotechnology 5 (11): 1759–1767. November 2005. doi:10.1166/jnn.2005.441. PMID 16433409. 
  111. "Engineered enzymes for improved organic synthesis". Current Opinion in Biotechnology 14 (4): 395–400. August 2003. doi:10.1016/S0958-1669(03)00095-8. PMID 12943848. 
  112. "De novo computational design of retro-aldol enzymes". Science 319 (5868): 1387–1391. March 2008. doi:10.1126/science.1152692. PMID 18323453. Bibcode2008Sci...319.1387J. 
  113. 113.0 113.1 "Hydrolysis of lignocellulosic materials for ethanol production: a review". Bioresource Technology 83 (1): 1–11. May 2002. doi:10.1016/S0960-8524(01)00212-7. PMID 12058826. Bibcode2002BiTec..83....1S. 
  114. 114.0 114.1 "Industrial enzyme applications". Current Opinion in Biotechnology 13 (4): 345–351. August 2002. doi:10.1016/S0958-1669(02)00328-2. PMID 12323357. 
  115. 115.0 115.1 115.2 Malts and Malting (1st ed.). London: Blackie Academic. 1998. ISBN 978-0412298004. 
  116. "Improved performances and control of beer fermentation using encapsulated alpha-acetolactate decarboxylase and modeling". Biotechnology Progress 16 (6): 958–965. 2000. doi:10.1021/bp000128k. PMID 11101321. 
  117. Ingredients in Meat Products Properties, Functionality and Applications. New York: Springer. 2008. pp. 177. ISBN 978-0-387-71327-4. 
  118. "Chymosin – GMO Database". GMO Compass. European Union. 10 July 2010. 
  119. "Review: Compounds Involved in the Flavor of Surface Mold-Ripened Cheeses: Origins and Properties". Journal of Dairy Science 79 (2): 169–184. February 1996. doi:10.3168/jds.S0022-0302(96)76348-8. 
  120. "Amylolytic enzymes and products derived from starch: a review". Critical Reviews in Food Science and Nutrition 35 (5): 373–403. September 1995. doi:10.1080/10408399509527706. PMID 8573280. 
  121. 121.0 121.1 "Protease – GMO Database". GMO Compass. European Union. 10 July 2010. 
  122. "Industrial applications of pectic enzymes: a review". Process Biochemistry 33 (1): 21–28. January 1998. doi:10.1016/S0032-9592(97)00046-0. 
  123. "Application of enzymes in the pulp and paper industry". Biotechnology Progress 15 (2): 147–157. March 1999. doi:10.1021/bp990013k. PMID 10194388. 
  124. "An analysis of contact lens enzyme cleaners". Journal of the American Optometric Association 61 (3): 190–194. March 1990. PMID 2186082. 
  125. "Economic Growth and Organization of the U.S. Starch Industry". Starch Chemistry and Technology (3rd ed.). London: Academic. 2009. ISBN 9780080926551. 

Further reading

External links