Biology:Transmission electron cryomicroscopy

From HandWiki
CryoTEM image of GroEL suspended in amorphous ice at 50000× magnification

File:Structure-of-Alcohol-Oxidase-from-Pichia-pastoris-by-Cryo-Electron-Microscopy-pone.0159476.s006.ogv Transmission electron cryomicroscopy (CryoTEM), commonly known as cryo-EM, is a form of cryogenic electron microscopy, more specifically a type of transmission electron microscopy (TEM) where the sample is studied at cryogenic temperatures (generally liquid-nitrogen temperatures).[1] Cryo-EM, specifically 3-dimensional electron microscopy (3DEM), is gaining popularity in structural biology.[2]

The utility of transmission electron cryomicroscopy stems from the fact that it allows the observation of specimens that have not been stained or fixed in any way, showing them in their native environment. This is in contrast to X-ray crystallography, which requires crystallizing the specimen, which can be difficult, and placing them in non-physiological environments, which can occasionally lead to functionally irrelevant conformational changes.

Advances in electron detector technology, particularly DED (Direct Electron Detectors) as well as more powerful software imaging algorithms have allowed for the determination of macromolecular structures at near-atomic resolution.[3] Imaged macromolecules include viruses, ribosomes, mitochondria, ion channels, and enzyme complexes. Starting in 2018, cryo-EM could applied to structures as small as hemoglobin (64 kDa)[4] and with resolutions up to 1.8 Å.[5] In 2019, cryo-EM structures represented 2.5% of structures deposited in the Protein Data Bank,[6] and this number continues to grow.[7] An application of cryo-EM is cryo-electron tomography (cryo-ET), where a 3D reconstruction of the sample is created from tilted 2D images.

Development

The original rationale for CryoTEM was as a means to fight radiation damage for biological specimens. The amount of radiation required to collect an image of a specimen in the electron microscope is high enough to be a potential source of specimen damage for delicate structures. In addition, the high vacuum required on the column of an electron microscope makes the environment for the sample quite harsh.

The problem of the vacuum was partially solved by the introduction of negative stains but even with negative stains biological samples are prone to structural collapse upon dehydration of the specimen. Embedding the samples in ice below the sublimation temperature was a possibility that was contemplated early on, but water tends to arrange into a crystalline lattice of lower density upon freezing and this can destroy the structure of anything that is embedded in it.

In the early 1980s, several groups studying solid state physics were attempting to produce vitreous ice by different means, such as high pressure freezing or flash freezing. In a seminal paper in 1984, the group led by Jacques Dubochet at the European Molecular Biology Laboratory showed images of adenovirus embedded in a vitrified layer of water.[8] This paper is generally considered to mark the origin of Cryo-EM, and the technique has been developed to the point of becoming routine at numerous laboratories throughout the world.

The energy of the electrons used for imaging (80–300 kV) is high enough that covalent bonds can be broken. When imaging specimens are vulnerable to radiation damage, it is necessary to limit the electron exposure used to acquire the image. These low exposures require that the images of thousands or even millions of identical frozen molecules be selected, aligned, and averaged to obtain high-resolution maps, using specialized software. A significant improvement in structural features was achieved in 2012 by the introduction of direct electron detectors and better computational algorithms.[1][2]

In 2015, Bridget Carragher and colleagues at the Scripps National Resource for Automated Molecular Microscopy used techniques she and Clint Potter developed to determine the first cryo-EM structure with a resolution finer than 3 Å, thereby elevating CryoTEM as a tool comparable to and potentially superior to traditional x-ray crystallography techniques.[9][10] Since then, higher resolutions have been achieved, including a 2.2 Å structure of bacterial enzyme β-galactosidase in 2015[11] and a 1.8 Å structure of glutamate dehydrogenase in 2016.[12] Cryo-EM has also been used to determine the structure of various viruses, including the Zika virus,[13] and has been applied to large complexes such as the spliceosome.[14] In 2017, the Nobel Prize in Chemistry was awarded jointly to Jacques Dubochet, Joachim Frank and Richard Henderson, "for developing cryo-electron microscopy for the high-resolution structure determination of biomolecules in solution".[15]

Biological specimens

Thin film

The biological material is spread on an electron microscopy grid and is preserved in a frozen-hydrated state by rapid freezing, usually in liquid ethane near liquid nitrogen temperature. By maintaining specimens at liquid nitrogen temperature or colder, they can be introduced into the high-vacuum of the electron microscope column. Most biological specimens are extremely radiosensitive, so they must be imaged with low-dose techniques (usefully, the low temperature of transmission electron cryomicroscopy provides an additional protective factor against radiation damage).

Consequently, the images are extremely noisy. For some biological systems it is possible to average images to increase the signal-to-noise ratio and retrieve high-resolution information about the specimen using the technique known as single particle analysis. This approach in general requires that the things being averaged are identical, although some limited conformational heterogeneity can now be studied (e.g. ribosome). Three-dimensional reconstructions from CryoTEM images of protein complexes and viruses have been solved to sub-nanometer or near-atomic resolution, allowing new insights into the structure and biology of these large assemblies.

Analysis of ordered arrays of protein, such as 2-D crystals of transmembrane proteins or helical arrays of proteins, also allows a kind of averaging which can provide high-resolution information about the specimen. This technique is called electron crystallography.

Vitreous sections

The thin film method is limited to thin specimens (typically < 500 nm) because the electrons cannot cross thicker samples without multiple scattering events. Thicker specimens can be vitrified by plunge freezing (cryofixation) in ethane (up to tens of μm in thickness) or more commonly by high pressure freezing (up to hundreds of μm). They can then be cut in thin sections (40 to 200 nm thick) with a diamond knife in a cryoultramicrotome at temperatures lower than −135 °C (devitrification temperature). The sections are collected on an electron microscope grid and are imaged in the same manner as specimen vitrified in thin film. This technique is called transmission electron cryomicroscopy of vitreous sections (CEMOVIS) or transmission electron cryomicroscopy of frozen-hydrated sections.

Material specimens

In addition to allowing vitrified biological samples to be imaged, CryoTEM can also be used to image material specimens that are too volatile in vacuum to image using standard, room temperature electron microscopy. For example, vitrified sections of liquid-solid interfaces can be extracted for analysis by CryoTEM,[16] and sulfur, which is prone to sublimation in the vacuum of electron microscopes, can be stabilized and imaged in CryoTEM.[17]

Image processing in cryo-TEM

Even though in the majority of approaches in electron microscopy one tries to get the best resolution image of the material, it is not always the case in cryo-TEM. Besides all the benefits of high resolution images, the signal to noise ratio remains the main hurdle that prevents assigning orientation to each particle. For example, in macromolecule complexes, there are several different structures that are being projected from 3D to 2D during imaging and if they are not distinguished the result of image processing will be a blur. That is why the probabilistic approaches become more powerful in this type of investigation.[18] There are two popular approaches that are widely used nowadays in cryo-EM image processing, the maximum likelihood approach that was discovered in 1998[19] and relatively recently adapted Bayesian approach.[20]

The maximum likelihood estimation approach comes to this field from the statistics. Here, all the possible orientations of particles are summed up to get the resulting probability distribution. We can compare this to a typical least square estimation where particles get exact orientations per image.[21] This way, the particles in the sample get "fuzzy" orientations after calculations, weighted by corresponding probabilities. The whole process is iterative and with each next iteration the model gets better. The good conditions for making the model that closely represent the real structure is when the data does not have too much noise and the particles do not have any preferential direction. The main downside of maximum likelihood approach is that the result depends on the initial guess and model optimization can sometimes get stuck at local minimum.[22]

The Bayesian approach that is now being used in cryo-TEM is empirical by nature. This means that the distribution of particles is based on the original dataset. Similarly, in the usual Bayesian method there is a fixed prior probability that is changed after the data is observed. The main difference from the maximum likelihood estimation lies in special reconstruction term that helps smoothing the resulting maps while also decreasing the noise during reconstruction.[21] The smoothing of the maps occurs through assuming prior probability to be a Gaussian distribution and analyzing the data in the Fourier space. Since the connection between the prior knowledge and the dataset is established, there is less chance for human factor errors which potentially increases the objectivity of image reconstruction.[20]

With emerging new methods of cryo-TEM imaging and image reconstruction the new software solutions appear that help to automate the process. After the empirical Bayesian approach have been implemented in the open source computer program RELION (REgularized LIkelihood OptimizatioN) for 3D reconstruction,[23][24] the program became widespread in the cryo-TEM field. It offers a range of corrections that improve the resolution of reconstructed images, allows implementing versatile scripts using python language and executes the usual tasks of 2D/3D model classifications or creating de novo models.[25][26]

Techniques

A variety of techniques can be used in CryoTEM.[27] Popular techniques include:

  1. Electron crystallography
    1. Analysis of two-dimensional crystals
    2. Analysis of helical filaments or tubes
    3. Microcrystal Electron Diffraction (MicroED)[28][29][30][31]
  2. Single particle analysis (SPA)
    1. Time-resolved CryoTEM[32][33][34]
  3. Electron cryotomography (cryoET)

See also

References

  1. ↑ 1.0 1.1 "Cryo-EM enters a new era". eLife 3: e03678. August 2014. doi:10.7554/elife.03678. PMID 25122623. 
  2. ↑ 2.0 2.1 "The revolution will not be crystallized: a new method sweeps through structural biology". Nature 525 (7568): 172–4. September 2015. doi:10.1038/525172a. PMID 26354465. Bibcode: 2015Natur.525..172C. 
  3. ↑ "Cryo-electron microscopy for structural analysis of dynamic biological macromolecules". Biochimica et Biophysica Acta (BBA) - General Subjects 1862 (2): 324–334. Feb 2018. doi:10.1016/j.bbagen.2017.07.020. PMID 28756276. 
  4. ↑ "Cryo-EM structure of haemoglobin at 3.2 Å determined with the Volta phase plate". Nature Communications 8: 16099. June 2017. doi:10.1038/ncomms16099. PMID 28665412. Bibcode: 2017NatCo...816099K. 
  5. ↑ "Breaking Cryo-EM Resolution Barriers to Facilitate Drug Discovery". Cell 165 (7): 1698–1707. June 2016. doi:10.1016/j.cell.2016.05.040. PMID 27238019. 
  6. ↑ "PDB Data Distribution by Experimental Method and Molecular Type". https://www.rcsb.org/stats/summary. 
  7. ↑ "PDB Statistics: Growth of Structures from 3DEM Experiments Released per Year". https://www.rcsb.org/stats/growth/em. 
  8. ↑ "Cryo-electron microscopy of viruses". Nature 308 (5954): 32–6. 1984. doi:10.1038/308032a0. PMID 6322001. Bibcode: 1984Natur.308...32A. https://serval.unil.ch/notice/serval:BIB_BEC796503260. 
  9. ↑ Dellisanti, Cosma (2015). "A barrier-breaking resolution". Nature Structural & Molecular Biology 22 (5): 361. doi:10.1038/nsmb.3025. 
  10. ↑ "2.8 Å resolution reconstruction of the Thermoplasma acidophilum 20S proteasome using cryo-electron microscopy". eLife 4. March 2015. doi:10.7554/eLife.06380. PMID 25760083. 
  11. ↑ "2.2 Å resolution cryo-EM structure of β-galactosidase in complex with a cell-permeant inhibitor". Science 348 (6239): 1147–51. June 2015. doi:10.1126/science.aab1576. PMID 25953817. Bibcode: 2015Sci...348.1147B. 
  12. ↑ "Advances in high-resolution cryo-EM of oligomeric enzymes". Current Opinion in Structural Biology 46: 48–54. October 2017. doi:10.1016/j.sbi.2017.05.016. PMID 28624735. 
  13. ↑ "The 3.8 Å resolution cryo-EM structure of Zika virus". Science 352 (6284): 467–70. April 2016. doi:10.1126/science.aaf5316. PMID 27033547. Bibcode: 2016Sci...352..467S. 
  14. ↑ "Single-particle cryo-EM-How did it get here and where will it go". Science 361 (6405): 876–880. August 2018. doi:10.1126/science.aat4346. PMID 30166484. Bibcode: 2018Sci...361..876C. 
  15. ↑ "The 2017 Nobel Prize in Chemistry – Press Release". 4 October 2017. https://www.nobelprize.org/nobel_prizes/chemistry/laureates/2017/press.html. 
  16. ↑ "Site-Specific Preparation of Intact Solid-Liquid Interfaces by Label-Free In Situ Localization and Cryo-Focused Ion Beam Lift-Out". Microscopy and Microanalysis 22 (6): 1338–1349. December 2016. doi:10.1017/S1431927616011892. PMID 27869059. Bibcode: 2016MiMic..22.1338Z. 
  17. ↑ "Characterization of Sulfur and Nanostructured Sulfur Battery Cathodes in Electron Microscopy Without Sublimation Artifacts". Microscopy and Microanalysis 23 (1): 155–162. February 2017. doi:10.1017/S1431927617000058. PMID 28228169. Bibcode: 2017MiMic..23..155L. https://zenodo.org/record/889883. 
  18. ↑ Cheng, Yifan (2018-08-31). "Single-particle cryo-EM—How did it get here and where will it go" (in en). Science 361 (6405): 876–880. doi:10.1126/science.aat4346. ISSN 0036-8075. PMID 30166484. Bibcode: 2018Sci...361..876C. 
  19. ↑ Sigworth, F.J. (1998). "A Maximum-Likelihood Approach to Single-Particle Image Refinement" (in en). Journal of Structural Biology 122 (3): 328–339. doi:10.1006/jsbi.1998.4014. PMID 9774537. 
  20. ↑ 20.0 20.1 Scheres, Sjors H.W. (January 2012). "A Bayesian View on Cryo-EM Structure Determination" (in en). Journal of Molecular Biology 415 (2): 406–418. doi:10.1016/j.jmb.2011.11.010. PMID 22100448. 
  21. ↑ 21.0 21.1 Nogales, Eva; Scheres, Sjors H.W. (May 2015). "Cryo-EM: A Unique Tool for the Visualization of Macromolecular Complexity". Molecular Cell 58 (4): 677–689. doi:10.1016/j.molcel.2015.02.019. ISSN 1097-2765. PMID 26000851. PMC 4441764. http://dx.doi.org/10.1016/j.molcel.2015.02.019. 
  22. ↑ Sigworth, Fred J. (2016-02-01). "Principles of cryo-EM single-particle image processing". Microscopy 65 (1): 57–67. doi:10.1093/jmicro/dfv370. ISSN 2050-5698. PMID 26705325. PMC 4749045. https://doi.org/10.1093/jmicro/dfv370. 
  23. ↑ Scheres, Sjors H. W. (2012-12-01). "RELION: Implementation of a Bayesian approach to cryo-EM structure determination" (in en). Journal of Structural Biology 180 (3): 519–530. doi:10.1016/j.jsb.2012.09.006. ISSN 1047-8477. PMID 23000701. 
  24. ↑ "RELION: Image-processing software for cryo-electron microscopy". 3dem. 27 October 2023. https://github.com/3dem/relion. 
  25. ↑ Bai, Xiao-chen; McMullan, Greg; Scheres, Sjors H.W (January 2015). "How cryo-EM is revolutionizing structural biology". Trends in Biochemical Sciences 40 (1): 49–57. doi:10.1016/j.tibs.2014.10.005. ISSN 0968-0004. PMID 25544475. http://dx.doi.org/10.1016/j.tibs.2014.10.005. 
  26. ↑ Zivanov, Jasenko; Nakane, Takanori; Forsberg, Björn O; Kimanius, Dari; Hagen, Wim JH; Lindahl, Erik; Scheres, Sjors HW (2018-11-09). Egelman, Edward H; Kuriyan, John. eds. "New tools for automated high-resolution cryo-EM structure determination in RELION-3". eLife 7: e42166. doi:10.7554/eLife.42166. ISSN 2050-084X. PMID 30412051. 
  27. ↑ Presentation on Cryoelectron Microscopy | PharmaXChange.info
  28. ↑ "Three-dimensional electron crystallography of protein microcrystals". eLife 2: e01345. November 2013. doi:10.7554/eLife.01345. PMID 24252878. 
  29. ↑ "High-resolution structure determination by continuous-rotation data collection in MicroED". Nature Methods 11 (9): 927–930. September 2014. doi:10.1038/nmeth.3043. PMID 25086503. 
  30. ↑ "The collection of MicroED data for macromolecular crystallography". Nature Protocols 11 (5): 895–904. May 2016. doi:10.1038/nprot.2016.046. PMID 27077331. 
  31. ↑ "Atomic-resolution structures from fragmented protein crystals with the cryoEM method MicroED". Nature Methods 14 (4): 399–402. February 2017. doi:10.1038/nmeth.4178. PMID 28192420. 
  32. ↑ "Key Intermediates in Ribosome Recycling Visualized by Time-Resolved Cryoelectron Microscopy". Structure 24 (12): 2092–2101. December 2016. doi:10.1016/j.str.2016.09.014. PMID 27818103. 
  33. ↑ "A Fast and Effective Microfluidic Spraying-Plunging Method for High-Resolution Single-Particle Cryo-EM". Structure 25 (4): 663–670.e3. April 2017. doi:10.1016/j.str.2017.02.005. PMID 28286002. 
  34. ↑ "Structural dynamics of ribosome subunit association studied by mixing-spraying time-resolved cryogenic electron microscopy". Structure 23 (6): 1097–105. June 2015. doi:10.1016/j.str.2015.04.007. PMID 26004440. 

Further reading

External links

Library resources about
Cryomicroscopy



Retrieved from "https://handwiki.org/wiki/index.php?title=Biology:Transmission_electron_cryomicroscopy&oldid=3577179"