Chemistry:Hexanitrohexaazaisowurtzitane

From HandWiki
Hexanitrohexaazaisowurtzitane
Partially condensed, stereo, skeletal formula of hexanitrohexaazaisowurtzitane
Ball and stick model of hexazaisowurtzitane
Names
IUPAC name
2,4,6,8,10,12-Hexanitro-2,4,6,8,10,12-hexaazatetracyclo[5.5.0.03,11.05,9]dodecane
Other names
  • CL-20
  • Hexanitrohexaazaisowurtzitane
  • 2,4,6,8,10,12-Hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane
  • Octahydro-1,3,4,7,8,10-hexanitro-5,2,6-(iminomethenimino)-1H-imidazo[4,5-b]pyrazine
  • HNIW
Identifiers
3D model (JSmol)
Abbreviations CL-20, HNIW
ChEBI
ChemSpider
UNII
Properties
C6N12H6O12
Molar mass 438.1850 g mol−1
Density 2.044 g cm−3
Explosive data
Detonation velocity 9,500 m/s
RE factor 1.9
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is ☑Y☒N ?)
Infobox references
Tracking categories (test):

Hexanitrohexaazaisowurtzitane, also called HNIW and CL-20, is a polycyclic nitroamine explosive with the formula C
6
H
6
N
12
O
12
. In the 1980s, CL-20 was developed by the China Lake facility, primarily to be used in propellants.[1] It has a better oxidizer-to-fuel ratio than conventional HMX or RDX. It releases 20% more energy than traditional HMX-based propellants, and is widely superior to conventional high-energy propellants and explosives.[citation needed]

While most development of CL-20 has been fielded by the Thiokol Corporation, the US Navy (through ONR) has also been interested in CL-20 for use in rocket propellants, such as for missiles, as it has lower observability characteristics such as less visible smoke.[2]

CL-20 has not yet been fielded in any production weapons system, but is undergoing testing for stability, production capabilities, and other weapons characteristics.

Synthesis

Synthesis of CL20

First, benzylamine (1) is condensed with glyoxal (2) under acidic and dehydrating conditions to yield the first intermediate compound.(3). Four benzyl groups selectively undergo hydrogenolysis using palladium on carbon and hydrogen. The amino groups are then acetylated during the same step using acetic anhydride as the solvent. (4). Finally, compound 4 is reacted with nitronium tetrafluoroborate and nitrosonium tetrafluoroborate, resulting in HNIW.[3]

Cocrystal product with HMX

In August 2012, Onas Bolton et al. published results showing that a cocrystal of 2 parts CL-20 and 1 part HMX had similar safety properties to HMX, but with a greater firing power closer to CL-20.[4][5]

Cocrystal product with TNT

In August 2011, Adam Matzger and Onas Bolton published results showing that a cocrystal of CL-20 and TNT had twice the stability of CL-20—safe enough to transport, but when heated to 136 °C (277 °F) the cocrystal may separate into liquid TNT and a crystal form of CL-20 with structural defects that is somewhat less stable than CL-20.[6][7]

CL-20 covalent chains and networks

In 2017, K.P. Katin and M.M. Maslov designed one-dimensional covalent chains based on the CL-20 molecules.[8] Such chains were constructed using CH2 molecular bridges for the covalent bonding between the isolated CL-20 fragments. It was theoretically predicted that their stability increased with efficient length growth. A year later, M.A. Gimaldinova and colleagues demonstrated the versatility of CH2 molecular bridges.[9] It is shown that the use of CH2 bridges is the universal technique to connect both CL-20 fragments in the chain and the chains together to make a network (linear or zigzag). It is confirmed that the increase of the effective sizes and dimensionality of the CL-20 covalent systems leads to their thermodynamic stability growth. Therefore, the formation of CL-20 crystalline covalent solids seems to be energetically favorable, and CL-20 molecules are capable of forming not only molecular crystals but bulk covalent structures as well. Numerical calculations of CL-20 chains and networks' electronic characteristics revealed that they were wide-bandgap semiconductors.[8][9]

See also

References

  1. Kadam, Tanmay (2023-03-11). "Pioneered By The US, China 'Racing Ahead' Of Its Arch Rival In 'CL-20' Tech That Propels PLA's Deadly Missiles". https://eurasiantimes.com/pioneered-by-the-us-china-races-ahead-of-its-arch-rival/. 
  2. Yirka, Bob (9 September 2011). "University chemists devise means to stabilize explosive CL-20". Physorg.com. http://www.physorg.com/news/2011-09-university-chemists-stabilize-explosive-cl-.html. Retrieved 8 July 2012. 
  3. Nair, U. R.; Sivabalan, R.; Gore, G. M.; Geetha, M.; Asthana, S. N.; Singh, H. (2005). "Hexanitrohexaazaisowurtzitane (CL-20) and CL-20-based formulations (review)". Combust. Explos. Shock Waves 41 (2): 121–132. doi:10.1007/s10573-005-0014-2. 
  4. Bolton, Onas (2012). "High Power Explosive with Good Sensitivity: A 2:1 Cocrystal of CL-20:HMX". Crystal Growth & Design 12 (9): 4311–4314. doi:10.1021/cg3010882. 
  5. "Powerful new explosive could replace today's state-of-the-art military explosive". 2012-09-06. http://www.spacewar.com/reports/Powerful_new_explosive_could_replace_todays_state_of_the_art_military_explosive_999.html. 
  6. Bolton, Onas (2011). "Improved Stability and Smart-Material Functionality Realized in an Energetic Cocrystal". Angewandte Chemie International Edition 50 (38): 8960–8963. doi:10.1002/anie.201104164. PMID 21901797. 
  7. "Things I Won't Work With: Hexanitrohexaazaisowurtzitane". 11 November 2011. https://www.science.org/content/blog-post/things-i-won-t-work-hexanitrohexaazaisowurtzitane. 
  8. 8.0 8.1 Katin, Konstantin P.; Maslov, Mikhail M. (2017). "Toward CL-20 crystalline covalent solids: On the dependence of energy and electronic properties on the effective size of CL-20 chains". Journal of Physics and Chemistry of Solids 108: 82–87. doi:10.1016/j.jpcs.2017.04.020. Bibcode2017JPCS..108...82K. 
  9. 9.0 9.1 Gimaldinova, Margarita A.; Maslov, Mikhail M.; Katin, Konstantin P. (2018). "Electronic and reactivity characteristics of CL-20 covalent chains and networks: a density functional theory study". CrystEngComm 20 (30): 4336–4344. doi:10.1039/c8ce00763b. 

Further reading