Chemistry:N,N-Diisopropylethylamine

From HandWiki
Revision as of 02:28, 6 February 2024 by ScienceGen (talk | contribs) (fixing)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Short description: Chemical compound


N,N-Diisopropylethylamine
Skeletal formula of N,N-diisopropylethylamine
N,N-Diisopropylethylamine-3D-balls-by-AHRLS-2012.png
N,N-Diisopropylethylamine-3D-vdW-by-AHRLS-2012.png
N,N-Diisopropylethylamine-3D-sticks-by-AHRLS-2012.png
Names
Preferred IUPAC name
N-Ethyl-N-(propan-2-yl)propan-2-amine
Other names
  • Ethyldi(propan-2-yl)amine
  • N-ethyl-N-isopropylpropan-2-amine
  • Ethyldi(isopropyl)amine
  • Hünig's base
  • DIPEA
Identifiers
3D model (JSmol)
ChemSpider
EC Number
  • 230-392-0
MeSH N,N-diisopropylethylamine
UNII
UN number 2733
Properties
C8H19N
Molar mass 129.247 g·mol−1
Appearance Colorless liquid
Odor Fishy, ammoniacal
Density 0.742 g mL−1
Melting point −50 to −46 °C (−58 to −51 °F; 223 to 227 K)
Boiling point 126.6 °C; 259.8 °F; 399.7 K
4.01 g/L (at 20 °C)
Vapor pressure 4.1 kPa (at 37.70 °C)
1.414
Hazards
GHS pictograms GHS02: Flammable GHS05: Corrosive GHS06: Toxic
GHS Signal word DANGER
H225, H301, H314, H412
P210, P273, P280, P301+310, P305+351+338, P310
Flash point 10 °C (50 °F; 283 K)
Explosive limits 0.7–6.3%
Lethal dose or concentration (LD, LC):
200–500 mg kg−1 (oral, rat)
Related compounds
Related amines
Related compounds
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is ☑Y☒N ?)
Infobox references
Tracking categories (test):

N,N-Diisopropylethylamine, or Hünig's base, is an organic compound that is a tertiary amine. It is named after the German chemist Siegfried Hünig [de]. It is used in organic chemistry as a non-nucleophilic base. It is commonly abbreviated as DIPEA, DIEA, or i-Pr2NEt.

Structure

DIPEA consists of a central nitrogen atom that is bonded to an ethyl group and two isopropyl groups. A lone pair of electrons resides on the nitrogen atom, which can react with electrophiles. However, the three alkyl groups on the nitrogen atom create steric hindrance, so only small electrophiles such as protons can react with the nitrogen lone pair.

Occurrence and preparation

DIPEA is commercially available. It is traditionally prepared by the alkylation of diisopropylamine with diethyl sulfate.[1]

Pure DIPEA exists as a colorless liquid, although commercial samples can be slightly yellow. If necessary, the compound can be purified by distillation from potassium hydroxide[2] or calcium hydride.[3]

Uses and reactions

DIPEA is a sterically hindered organic base that is commonly employed as a proton scavenger. Thus, like 2,2,6,6-tetramethylpiperidine and triethylamine, DIPEA is a good base but a poor nucleophile, DIPEA has low solubility in water, which makes it very easily recovered in commercial processes, a combination of properties that makes it a useful organic reagent.[4]

Amide coupling

It is commonly used as the hindered base in amide coupling reactions between a carboxylic acid (typically activated, for example, as an acid chloride, as illustrated below) and a nucleophilic amine.[5] As DIPEA is hindered and poorly nucleophilic, it does not compete with the nucleophilic amine in the coupling reaction.

Use of DIPEA in amide coupling between acid chloride and amine.png

Alkylations

DIPEA has been investigated for its use as a selective reagent in the alkylation of secondary amines to tertiary amines by alkyl halides. This is often hampered by an unwanted Menshutkin reaction forming a quaternary ammonium salt, but is absent when DIPEA is present.[6]

The use of Hünig's base for alkylating secondary amines

Transition metal catalyzed cross-coupling reactions

DIPEA can be used as a base in a number of transition metal catalyzed cross-coupling reactions, such as the Heck coupling and the Sonogashira coupling (as illustrated below).[7]

Generic Sonogashira coupling with DIPEA as base.png

Swern oxidation

Although triethylamine is traditionally employed as the hindered base in Swern oxidations, the structurally similar DIPEA can be used instead, as exemplified below.[8]

Swern oxidation with DIPEA.png

Examples of DIPEA used as a substrate

DIPEA forms a complex heterocyclic compound called scorpionine (bis([1,2]dithiolo)-[1,4]thiazine) upon reaction with disulfur dichloride that is catalyzed by DABCO in a one-pot synthesis.[9]

Hünig's base in the synthesis of scorpionine

Comparison with triethylamine

DIPEA and triethylamine are structurally very similar, with both compounds considered hindered organic bases. Due to their structural similarity, DIPEA and triethylamine can be used interchangeably in most applications. The nitrogen atom in DIPEA is more hindered than the nitrogen atom in triethylamine. However, triethylamine is a slightly stronger base than DIPEA; the pKa values of the respective conjugate acids in dimethyl sulfoxide are 9.0 and 8.5, respectively.[10]

References

  1. Hünig, S.; Kiessel, M. (1958). "Spezifische Protonenacceptoren als Hilfsbasen bei Alkylierungs- und Dehydrohalogenierungsreaktionen". Chemische Berichte 91 (2): 380–392. doi:10.1002/cber.19580910223. 
  2. Armarego, W. L. F. (2012-10-17). Purification of Laboratory Chemicals. Chai, Christina Li Lin (Seventh ed.). Amsterdam. ISBN 9780123821621. OCLC 820853648. 
  3. Keiper, Sonja; Vyle, Joseph S. (2006-05-12). "Reversible Photocontrol of Deoxyribozyme-Catalyzed RNA Cleavage under Multiple-Turnover Conditions" (in en). Angewandte Chemie International Edition 45 (20): 3306–3309. doi:10.1002/anie.200600164. ISSN 1433-7851. PMID 16619331. https://pure.qub.ac.uk/portal/en/publications/reversible-photocontrol-of-deoxyribozymecatalyzed-rna-cleavage-under-multipleturnover-conditions(5df8e717-4851-4417-8b24-7f306d267a4d).html. 
  4. Sorgi, K. L. (2001). Encyclopedia of Reagents for Organic Synthesis. doi:10.1002/047084289X.rd254. ISBN 978-0471936237. 
  5. Dunetz, Joshua R.; Magano, Javier; Weisenburger, Gerald A. (2016-02-05). "Large-Scale Applications of Amide Coupling Reagents for the Synthesis of Pharmaceuticals" (in EN). Organic Process Research & Development 20 (2): 140–177. doi:10.1021/op500305s. ISSN 1083-6160. 
  6. Moore, J. L.; Taylor, S. M.; Soloshonok, V. A. (2005). "An efficient and operationally convenient general synthesis of tertiary amines by direct alkylation of secondary amines with alkyl halides in the presence of Huenig's base". Arkivoc 2005 (part vi): 287–292. doi:10.3998/ark.5550190.0006.624. EJ-1549C. 
  7. Chinchilla, Rafael; Nájera, Carmen (2011). "Recent advances in Sonogashira reactions" (in en). Chemical Society Reviews 40 (10): 5084–5121. doi:10.1039/c1cs15071e. ISSN 0306-0012. PMID 21655588. http://xlink.rsc.org/?DOI=c1cs15071e. 
  8. Walba, David M.; Thurmes, William N.; Haltiwanger, R. Curtis (1988). "A highly stereocontrolled route to the monensin spiroketal ring system" (in EN). The Journal of Organic Chemistry 53 (5): 1046–1056. doi:10.1021/jo00240a022. ISSN 0022-3263. 
  9. Rees, W.; Marcos, C. F.; Polo, C.; Torroba, T.; O. A. Rakitin (1997). "From Hünig's Base to Bis([1,2]dithiolo)-[1,4]thiazines in One Pot: The Fast Route to Highly Sulfurated Heterocycles". Angewandte Chemie International Edition 36 (3): 281–283. doi:10.1002/anie.199702811. 
  10. Lepore, Salvatore D.; Khoram, Anita; Bromfield, Deborah C.; Cohn, Pamela; Jairaj, Vinod; Silvestri, Maximilian A. (2005). "Studies on the Manganese-Mediated Isomerization of Alkynyl Carbonyls to Allenyl Carbonyls". The Journal of Organic Chemistry 70 (18): 7443–7446. doi:10.1021/jo051040u. ISSN 0022-3263. PMID 16122274.