Chemistry:Diphenyl ether
| |
| |
| |
| Names | |
|---|---|
| Preferred IUPAC name
1,1′-Oxydibenzene[1] | |
| Other names | |
| Identifiers | |
3D model (JSmol)
|
|
| 1364620 | |
| ChEBI | |
| ChEMBL | |
| ChemSpider | |
| EC Number |
|
| 165477 | |
PubChem CID
|
|
| RTECS number |
|
| UNII | |
| UN number | 3077 |
| |
| |
| Properties | |
| C12H10O | |
| Molar mass | 170.211 g·mol−1 |
| Appearance | Colorless solid or liquid |
| Odor | geranium-like |
| Density | 1.08 g/cm3 (20 °C)[2] |
| Melting point | 25 to 26 °C (77 to 79 °F; 298 to 299 K) |
| Boiling point | 258.55 °C (497.39 °F; 531.70 K)[3] at 100 kPa (1 bar), 121 °C at 1.34 kPa (10.05 mm Hg) |
| Insoluble | |
| Vapor pressure | 0.02 mmHg (25 °C)[2] |
| -108.1·10−6 cm3/mol | |
| Hazards | |
| Safety data sheet | Aldrich MSDS |
| GHS pictograms |  
|
| GHS Signal word | Warning |
| H319, H400, H411 | |
| P264, P273, P280, P305+351+338, P337+313, P391, P501 | |
| NFPA 704 (fire diamond) | |
| Flash point | 115 °C (239 °F; 388 K) |
| Explosive limits | 0.7%–6.0%[2] |
| Lethal dose or concentration (LD, LC): | |
LD50 (median dose)
|
3370 mg/kg (rat, oral) 4000 mg/kg (rat, oral) 4000 mg/kg (guinea pig, oral)[4] |
| NIOSH (US health exposure limits): | |
PEL (Permissible)
|
TWA 1 ppm (7 mg/m3)[2] |
REL (Recommended)
|
TWA 1 ppm (7 mg/m3)[2] |
IDLH (Immediate danger)
|
100 ppm[2] |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). | |
 verify (what is   ?)
| |
| Infobox references | |
Diphenyl ether is the organic compound with the formula (C6H5)2O. It is a colorless, low-melting solid. This, the simplest diaryl ether, has a variety of niche applications.[5]
Synthesis and reactions
Diphenyl ether and many of its properties were first reported as early as 1901.[6] It is synthesized by a modification of the Williamson ether synthesis, here the reaction of phenol and bromobenzene in the presence of base and a catalytic amount of copper:
- PhOH + PhBr → PhOPh + HBr
Involving similar reactions, diphenyl ether is a significant side product in the high-pressure hydrolysis of chlorobenzene in the production of phenol.[7]
Related compounds are prepared by Ullmann reactions.[8]
The compound undergoes reactions typical of other phenyl rings, including hydroxylation, nitration, halogenation, sulfonation, and Friedel–Crafts alkylation or acylation.[5]
Uses
The main application of diphenyl ether is as a eutectic mixture with biphenyl, used as a heat transfer fluid. Such a mixture is well-suited for heat transfer applications because of the relatively large temperature range of its liquid state. A eutectic mixture (commercially, Dowtherm A) is 73.5% diphenyl ether and 26.5% biphenyl.[9][10]
Diphenyl ether is a starting material in the production of phenoxathiin via the Ferrario reaction.[11] Phenoxathiin is used in polyamide and polyimide production.[12]
Because of its odor reminiscent of scented geranium, as well as its stability and low price, diphenyl ether is used widely in soap perfumes. Diphenyl ether is also used as a processing aid in the production of polyesters.[5]
Related compounds
It is a component of important hormone T3 or triiodothyronine.
Several polybrominated diphenyl ethers (PBDEs) are useful flame retardants. Of penta-, octa-, and decaBDE, the three most common PBDEs, only decaBDE is still in widespread use since its ban in the European Union in 2003.[13] DecaBDE, also known as decabromodiphenyl oxide,[14] is a high-volume industrial chemical with over 450,000 kilograms produced annually in the United States. Decabromodiphenyl oxide is sold under the trade name Saytex 102 as a flame retardant in the manufacture of paints and reinforced plastics.
References
- ↑ 1.0 1.1 1.2 "CHAPTER P-6. Applications to Specific Classes of Compounds". Nomenclature of Organic Chemistry : IUPAC Recommendations and Preferred Names 2013 (Blue Book). Cambridge: The Royal Society of Chemistry. 2014. p. 705. doi:10.1039/9781849733069-00648. ISBN 978-0-85404-182-4.
- ↑ 2.0 2.1 2.2 2.3 2.4 2.5 NIOSH Pocket Guide to Chemical Hazards. "#0496". National Institute for Occupational Safety and Health (NIOSH). https://www.cdc.gov/niosh/npg/npgd0496.html.
- ↑ Byers, Charles H.; Williams, David F. (July 1987). "Viscosities of pure polyaromatic hydrocarbons". Journal of Chemical & Engineering Data 32 (3): 344–348. doi:10.1021/je00049a018. ISSN 0021-9568.
- ↑ "Phenyl ether". Immediately Dangerous to Life and Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH). https://www.cdc.gov/niosh/idlh/101848.html.
- ↑ 5.0 5.1 5.2 Fiege, H.; Voges, H.-M.; Hamamoto, T; Umemura, S.; Iwata, T.; Miki, H.; Fujita, Y.; Buysch, H.-J. et al. (2000). "Ullmann's Encyclopedia of Industrial Chemistry". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a19_313.
- ↑ Cook, A. N. (1901). "Derivatives of Phenylether". Journal of the American Chemical Society 23 (10): 806–813. doi:10.1021/ja02037a005. https://zenodo.org/record/1428908.
- ↑ Fahlbusch, K.-G.; Hammerschmidt, F.-J.; Panten, J.; Pickenhagen, W.; Schatkowski, D.; Bauer, K.; Garbe, D.; Surburg, H. (2003). Flavor and Fragrances. Weinheim: Wiley-VCH. doi:10.1002/14356007.a11_141. ISBN 978-3-527-30673-2.
- ↑ Ungnade, H. E.; Orwoll, E. F. (1946). "2-Methoxy Diphenyl Ether". Org. Synth. 26: 50. doi:10.15227/orgsyn.026.0050.
- ↑ Patent Appeal No. 7555 United States Court of Customs and Patent Appeals 7 April 1966 http://openjurist.org/358/f2d/750/application-of-edward-s-blake-and-william-c-hammann
- ↑ "Dowtherm® A 44570". http://www.sigmaaldrich.com/catalog/product/aldrich/44570.
- ↑ Suter, C. M.; Maxwell, C. E. (1943). "Phenoxthin". Organic Syntheses. http://www.orgsyn.org/demo.aspx?prep=cv2p0485.; Collective Volume, 2, pp. 485
- ↑ Mitsuru Ueoda; Tatsuo Aizawa; Yoshio Imai (1977). "Preparation and properties of polyamides and polyimides containing phenoxathiin units". Journal of Polymer Science: Polymer Chemistry Edition 15 (11): 2739–2747. doi:10.1002/pol.1977.170151119.
- ↑ DIRECTIVE 2003/11/EC of the European Parliament and of the Council
- ↑ Sutker, B. J. (2005). "Flame Retardants". Weinheim: Wiley-VCH. doi:10.1002/14356007.a11_123. ISBN 978-3-527-30673-2.
 |  |
