Engineering:Toyota Aurion

From HandWiki
Short description: Australian mid-size car
Toyota Aurion
2015 Toyota Aurion (GSV50R) AT-X sedan (2015-07-06) 01.jpg
Overview
ManufacturerToyota
Also calledToyota Camry
Production2006–2017
Designer
  • Nick Hogios (2004; XV40 model)
  • Anthony Cheung (2007; facelift XV40 model)
  • Hirofumi Fukui and Kazumi Kowaki (2009; XV50 model)
  • Naohiko Suzuki (Sportivo XV50 model)
  • Keisuke Matsuno (2009; facelift XV50 model)
Body and chassis
ClassMid-size car
Body style4-door sedan
LayoutFront-engine, front-wheel drive
Related
Chronology
Predecessor
  • Toyota Avalon (XX10)
  • Toyota Camry (XV30)
SuccessorToyota Camry (XV70)

The Toyota Aurion /ˈɔːriən/ is a mid-size car produced by Toyota in Australia and parts of Asia from 2006 to 2017. In the two generations it was produced, the Aurion was derived from the equivalent Camry. Changes were mainly limited to revised front- and rear-end treatment, along with changes to the interior. The Camry-based Aurion was also sold in the majority of East and Southeast Asia as the Toyota Camry, with the original version of the Camry sold alongside the Aurion in Australasia and the Middle East. In the previous two markets, the car replaced the Avalon model, which can trace its roots back to the early 1990s. A total of 111,140 Aurions were sold over the 10 year Australian production span.

The name "Aurion" was derived from Greek word meaning "tomorrow".[1]

First generation (XV40; 2006)

Main page: Engineering:Toyota Aurion (XV40)

The first generation Aurion was on sale from 2006 to 2012. In Australia and New Zealand, it replaced the Toyota Avalon (XX10). In some markets this car is referred to as the "prestige" Camry. The Aurion shares most of its tooling, drivetrain, and centre body work, with restyled front and rear ends and interior fittings.

In 2006, Toyota Australia released a heavily enhanced version known as the TRD Aurion, with a supercharged engine and full bodykit.[2]

Pre-facelift

Facelift (2009)

Year Units sold
2006 (November–December) 3,037
2007 22,036
2008 19,562
2009 13,910[3]
2010 11,764
2011 8,915
2012 (January) 989
Total 80,213

Second generation (XV50; 2011)

Main page: Engineering:Toyota Camry (XV50)

After production started in February 2012, April 2012 saw the release of the second generation Aurion in Australia and New Zealand. The same model designations applied in Australia in tie with the first generation model, those being: AT-X, Sportivo SX6, Sportivo ZR6, Prodigy, and Presara. In New Zealand, the model designations are: AT-X, Touring, and Sportivo SX6.

This nameplate is again based on the Camry. The all new model has been available for some Asian and European markets as a Camry since 2011. The same, separate model designations of the Camry and Aurion are on sale in Australia and New Zealand. For the first time, with the XV50 model, the Japanese market Camry is now based on the same design as the "prestige" Camry or Aurion, rather than the "regular" Camry. The "prestige" Camry was designed in Japan by Hirofumi Fukui, Kazumi Kowaki and Keisuke Matsuno in 2009 and unveiled in Ukraine on 25 August 2011.

Facelift

The Aurion-based Camry, sold in Japan and other Asian markets, received a large facelift in 2014. It was discontinued in Japan in July 2017 and in Southeast Asia in late 2018, and it was replaced by the TNGA-based XV70 Camry.

In Australia, however, the Aurion itself received a much smaller facelift, with little exterior changes. The Prodigy trim was deleted from the range, and the Sportivo SX6 and ZR6 were merged to form a single Sportivo trim. The revised trim for the Australian market were: AT-X, Sportivo and Presara.[4]

Special Editions

In 2012, the Aurion in Australia released the Touring SE variant. Only 1500 were built, all of which were based on the AT-X. It added a rear spoiler, front fog lamps, as well as a sports grille on the exterior. The interior features contained a similar interior as the AT-X, except it included steering wheel with audio controls and sport pedals.[5]

Replacement/Successor

Production of the second generation Aurion in Australia ended in August 2017, ending Aurion production after almost 11 years. With this, Toyota reintroduced, for the first time since 2006, the V6 Camry. Like the Aurion, the Camry also ceased production at the Altona factory, with an imported model from Japan coming to replace it.[6]

References