# Physics:Turn (angle)

Short description: Unit of plane angle where a full circle equals 1

Turn
Counterclockwise rotations about the center point where a complete rotation corresponds to an angle of rotation of 1 turn.
General information
Unit ofPlane angle
Symboltr or pla
Conversions
1 tr in ...... is equal to ...
degrees   360°

One turn (symbol tr or pla) is a unit of plane angle measurement equal to  radians, 360 degrees or 400 gradians. Thus it is the angular measure subtended by a complete circle at its center.

Subdivisions of a turn include half-turns and quarter-turns, spanning a semicircle and a right angle, respectively; metric prefixes can also be used as in, e.g., centiturns (ctr), milliturns (mtr), etc.

As an angular unit, one turn also corresponds to one cycle (symbol cyc or c)[1] or to one revolution (symbol rev or r).[2]

In the ISQ, an arbitrary "number of turns" (also known as "number of revolutions" or "number of cycles") is formalized as a dimensionless quantity called rotation, defined as the ratio of a given angle and the full turn. (See below for the formula.)

Common related units of frequency are cycles per second (cps) and revolutions per minute (rpm).[lower-alpha 1]

## History

The word turn originates via Latin and French from the Greek word τόρνος (tórnos – a lathe).

In 1697, David Gregory used π/ρ (pi over rho) to denote the perimeter of a circle (i.e., the circumference) divided by its radius.[3][4] However, earlier in 1647, William Oughtred had used δ/π (delta over pi) for the ratio of the diameter to perimeter. The first use of the symbol π on its own with its present meaning (of perimeter divided by diameter) was in 1706 by the Welsh mathematician William Jones.[5] Euler adopted the symbol with that meaning in 1737, leading to its widespread use.

Percentage protractors have existed since 1922,[6] but the terms centiturns, milliturns and microturns were introduced much later by the British astronomer Fred Hoyle in 1962.[7][8] Some measurement devices for artillery and satellite watching carry milliturn scales.[9][10]

## Unit symbols

The German standard DIN 1315 (March 1974) proposed the unit symbol "pla" (from Latin: plenus angulus 'full angle') for turns.[11][12] Covered in DIN 1301-1 (de) (October 2010), the so-called Vollwinkel ('full angle') is not an SI unit. However, it is a legal unit of measurement in the EU[13][14] and Switzerland.[15]

The scientific calculators HP 39gII and HP Prime support the unit symbol "tr" for turns since 2011 and 2013, respectively. Support for "tr" was also added to newRPL for the HP 50g in 2016, and for the hp 39g+, HP 49g+, HP 39gs, and HP 40gs in 2017.[16][17] An angular mode TURN was suggested for the WP 43S as well,[18] but the calculator instead implements "MULπ" (multiples of π) as mode and unit since 2019.[19][20]

## Subdivisions

A turn can be divided in 100 centiturns or 1000 milliturns, with each milliturn corresponding to an angle of 0.36°, which can also be written as 21′ 36″.[7][8] A protractor divided in centiturns is normally called a "percentage protractor".

Binary fractions of a turn are also used. Sailors have traditionally divided a turn into 32 compass points, which implicitly have an angular separation of 1/32 turn. The binary degree, also known as the binary radian (or brad), is 1/256 turn.[21] The binary degree is used in computing so that an angle can be represented to the maximum possible precision in a single byte. Other measures of angle used in computing may be based on dividing one whole turn into 2n equal parts for other values of n.[22]

The notion of turn is commonly used for planar rotations.

Submultiples Multiples Value SI symbol Name Value 10−1 tr dtr deciturn 101 tr datr decaturn 10−2 tr ctr centiturn 102 tr htr hectoturn 10−3 tr mtr milliturn 103 tr ktr kiloturn 10−6 tr µtr microturn 106 tr Mtr megaturn 10−9 tr ntr nanoturn 109 tr Gtr gigaturn 10−12 tr ptr picoturn 1012 tr Ttr teraturn 10−15 tr ftr femtoturn 1015 tr Ptr petaturn 10−18 tr atr attoturn 1018 tr Etr exaturn 10−21 tr ztr zeptoturn 1021 tr Ztr zettaturn 10−24 tr ytr yoctoturn 1024 tr Ytr yottaturn

## Unit conversion

The circumference of the unit circle (whose radius is one) is 2π.
A comparison of angles expressed in degrees and radians.

One turn is equal to 2π (≈ 6.283185307179586)[23] radians, 360 degrees, or 400 gradians.

Conversion of common angles
1/2π turn 1 rad c. 57.3° c. 63.7g
2/5 turn /5 rad Lua error: not enough memory. rad 144° 160g
Lua error: not enough memory. turn Lua error: Internal error: The interpreter exited with status 1. rad π rad 180° 200g
Lua error: Internal error: The interpreter exited with status 1. turn Lua error: Internal error: The interpreter exited with status 1. rad Lua error: Internal error: The interpreter exited with status 1. rad 270° 300g

## Proposals for a single letter to represent 2π

An arc of a circle with the same length as the radius of that circle corresponds to an angle of 1 radian. A full circle corresponds to a full turn, or approximately 6.28 radians, which is expressed here using the Greek letter tau (τ).

In 1746, Leonhard Euler first used the Greek letter pi to represent the circumference divided by the radius of a circle (i.e., π = 6.28...).[24]

In 2001, Robert Palais proposed using the number of radians in a turn as the fundamental circle constant instead of π, which amounts to the number of radians in half a turn, in order to make mathematics simpler and more intuitive. His proposal used a "π with three legs" symbol to denote the constant ($\displaystyle{ \pi\!\;\!\!\!\pi = 2\pi }$).[25]

In 2008, Thomas Colignatus proposed the uppercase Greek letter theta, Θ, to represent 2π.[26] The Greek letter theta derives from the Phoenician and Hebrew letter teth, 𐤈 or ט, and it has been observed that the older version of the symbol, which means wheel, resembles a wheel with four spokes.[27] It has also been proposed to use the wheel symbol, teth, to represent the value 2π, and more recently a connection has been made among other ancient cultures on the existence of a wheel, sun, circle, or disk symbol—i.e. other variations of teth—as representation for 2π.[28]

In 2010, Michael Hartl proposed to use the Greek letter tau to represent the circle constant: τ = 2π. He offered two reasons. First, τ is the number of radians in one turn, which allows fractions of a turn to be expressed more directly: for instance, a Lua error: Internal error: The interpreter exited with status 1. turn would be represented as Lua error: Internal error: The interpreter exited with status 1. rad instead of Lua error: Internal error: The interpreter exited with status 1. rad. Second, τ visually resembles π, whose association with the circle constant is unavoidable.[29] Hartl's Tau Manifesto[30] gives many examples of formulas that are asserted to be clearer where τ is used instead of π,[31][32][33] such as a tighter association with the geometry of Euler's identity using e = 1 instead of e = −1.

Initially, neither of these proposals received widespread acceptance by the mathematical and scientific communities.[34] However, the use of τ has become more widespread,[35] for example:

The following table shows how various identities appear if τ = 2π was used instead of π.[52][25] For a more complete list, see List of formulae involving π.

Formula Using π Using τ Notes
Angle subtended by Lua error: Internal error: The interpreter exited with status 1. of a circle Lua error: Internal error: The interpreter exited with status 1. rad Lua error: Internal error: The interpreter exited with status 1. rad Lua error: Internal error: The interpreter exited with status 1. rad = Lua error: Internal error: The interpreter exited with status 1. turn
Circumference C of a circle of radius r C = 2πr C = τr
Area of a circle A = πr2 A = Lua error: Internal error: The interpreter exited with status 1.τr2 The area of a sector of angle θ is A = Lua error: Internal error: The interpreter exited with status 1.θr2.
Area of a regular n-gon with unit circumradius A = Lua error: Internal error: The interpreter exited with status 1. sin Lua error: Internal error: The interpreter exited with status 1. A = Lua error: Internal error: The interpreter exited with status 1. sin Lua error: Internal error: The interpreter exited with status 1.
n-ball and n-sphere volume recurrence relation Vn(r) = Lua error: Internal error: The interpreter exited with status 1. Sn−1(r) Sn(r) = 2πr Vn−1(r) Vn(r) = Lua error: Internal error: The interpreter exited with status 1. Sn−1(r) Sn(r) = τr Vn−1(r) V0(r) = 1
S0(r) = 2
Cauchy's integral formula $\displaystyle{ f(a) = \frac{1}{{\color{orangered}2\pi} i} \oint_\gamma \frac{f(z)}{z-a}\, dz }$ $\displaystyle{ f(a) = \frac{1}{{\color{orangered}\tau} i} \oint_\gamma \frac{f(z)}{z-a}\, dz }$
Standard normal distribution $\displaystyle{ \varphi(x) = \frac{1}{\sqrt{{\color{orangered}2\pi}}}e^{-\frac{x^2}{2}} }$ $\displaystyle{ \varphi(x) = \frac{1}{\sqrt{{\color{orangered}\tau}}}e^{-\frac{x^2}{2}} }$
Stirling's approximation $\displaystyle{ n! \sim \sqrt{{\color{orangered}2 \pi} n}\left(\frac{n}{e}\right)^n }$ $\displaystyle{ n! \sim \sqrt{{\color{orangered}\tau} n}\left(\frac{n}{e}\right)^n }$
Euler's identity 0Lua error: Internal error: The interpreter exited with status 1.eiπ = −1
eiπ + 1 = 0
0Lua error: Internal error: The interpreter exited with status 1.eiτ = 1
eiτ - 1 = 0
For any integer k, eikτ = 1
nth roots of unity $\displaystyle{ e^{{\color{orangered}2 \pi} i \frac{k}{n}} = \cos\frac{{\color{orangered}2} k {\color{orangered}\pi}}{n} + i \sin\frac{{\color{orangered}2} k {\color{orangered}\pi}}{n} }$ $\displaystyle{ e^{{\color{orangered}\tau} i \frac{k}{n}} = \cos\frac{k {\color{orangered}\tau}}{n} + i \sin\frac{k {\color{orangered}\tau}}{n} }$
Planck constant $\displaystyle{ h = {\color{orangered}2 \pi} \hbar }$ $\displaystyle{ h = {\color{orangered}\tau} \hbar }$ ħ is the reduced Planck constant.
Angular frequency $\displaystyle{ \omega = {\color{orangered}2 \pi} f }$ $\displaystyle{ \omega = {\color{orangered}\tau} f }$

## In the ISQ/SI

Lua error: Internal error: The interpreter exited with status 1.

A concept related to the angular unit "turn" is the physical quantity rotation (symbol N) defined as number of revolutions:[53]

N is the number (not necessarily an integer) of revolutions, for example, of a rotating body about a given axis. Its value is given by:

N=Lua error: Internal error: The interpreter exited with status 1.

where φ denotes the measure of rotational displacement.

The above definition is part of the International System of Quantities (ISQ), formalized in the international standard ISO 80000-3 (Space and time),[53] and adopted in the International System of Units (SI).[54][55]

Rotation count or number of revolutions is a quantity of dimension one, resulting from a ratio of angles. It can be negative and also greater than 1 in modulus. The relationship between quantity rotation, N, and unit turns, tr, can be expressed as:

N=φ/tr={φ}tr

where {φ}tr is the numerical value of the angle φ in units of turns (see Physical quantity).

In the ISQ/SI, rotation is used to derive rotational frequency, n=dN/dt, with SI base unit of reciprocal seconds (s-1); common related units of frequency are hertz (Hz), cycles per second (cps), and revolutions per minute (rpm).

Lua error: Internal error: The interpreter exited with status 1. The superseded version ISO 80000-3:2006 defined "revolution" as a special name for the dimensionless unit "one",[lower-alpha 3] which also received other special names, such as the radian.[lower-alpha 4] Despite their dimensional homogeneity, these two specially named dimensionless units are applicable for non-comparable kinds of quantity: rotation and angle, respectively.[57] "Cycle" is also mentioned in ISO 80000-3, in the definition of period.[lower-alpha 5]

## Notes

1. The angular unit terms "cycles" and "revolutions" are also used, ambiguously, as shorter versions of the related frequency units.[citation needed]
2. In this table, 𝜏 denotes 2π.
3. "The special name revolution, symbol r, for this unit [name 'one', symbol '1'] is widely used in specifications on rotating machines."[56]
4. "Measurement units of quantities of dimension one are numbers. In some cases, these measurement units are given special names, e.g. radian..."[56]
5. "3-14) period duration, period: duration (item 3‑9) of one cycle of a periodic event"[53]

Lua error: Internal error: The interpreter exited with status 1.

## References

1. Newtonian Dynamics: An Introduction. CRC Press. 2021. p. 116. ISBN 978-1-000-50953-3. Retrieved 2023-04-25.
2. Units & Symbols for Electrical & Electronic Engineers. London, UK: Institution of Engineering and Technology. 2016. Retrieved 2023-07-18.  (1+iii+32+1 pages)
3. A History of Pi. Barnes & Noble Publishing. 1989.
4. The Words of Mathematics: An Etymological Dictionary of Mathematical Terms Used in English. The Mathematical Association of America. 1994. p. 165. ISBN 978-0-88385511-9.
5. "A Percentage Protractor - Designed for Use in the Construction of Circle Charts or "Pie Diagrams"". Journal of the American Statistical Association. Short Note 18 (137): 108–109. 1922. doi:10.1080/01621459.1922.10502455.
6. Chandler, M. H., ed (1962). Astronomy (1 ed.). London, UK: Macdonald & Co. (Publishers) Ltd. / Rathbone Books Limited. OCLC 7419446.  (320 pages)
7. "Chapter 8: Keeping Track of Time". The Science of Measurement: A Historical Survey (The World of Measurements: Masterpieces, Mysteries and Muddles of Metrology). Dover Books on Mathematics (corrected reprint of original ed.). Dover Publications, Inc. / Courier Corporation (originally by Simon & Schuster, Inc.). 2012. p. 102. ISBN 978-0-48614497-9. Retrieved 2019-08-06.  (736 pages)
8. Wähnl, Maria Emma, ed (1965). "Bestimmung von Satellitenbahnen" (in de). Astronomische Mitteilungen der Urania-Sternwarte Wien (Wien, Austria: Volksbildungshaus Wiener Urania) 8.
9. Trackers of the Skies. History of the Smithsonian Satellite-tracking Program. Cambridge, Massachusetts, USA: Academic Press / Howard A. Doyle Publishing Company. 1975.
10. (in de) Handbuch SI-Einheiten: Definition, Realisierung, Bewahrung und Weitergabe der SI-Einheiten, Grundlagen der Präzisionsmeßtechnik (1 ed.). Friedrich Vieweg & Sohn Verlagsgesellschaft mbH, reprint: Springer-Verlag. 2013-03-13. p. 421. 978-3-528-08441-7, 978-3-32283606-9. ISBN 978-3-32283606-9. Retrieved 2015-08-14.
11. (in de) Das Vieweg Einheiten-Lexikon: Formeln und Begriffe aus Physik, Chemie und Technik (1 ed.). Vieweg, reprint: Springer-Verlag. 2013-03-09. p. 403. doi:10.1007/978-3-322-92920-4. 978-3-322-92921-1. ISBN 978-3-32292920-4. Retrieved 2015-08-14.
12. "Art. 15 Einheiten in Form von nichtdezimalen Vielfachen oder Teilen von SI-Einheiten" (in de-ch). Einheitenverordnung. Schweizerischer Bundesrat. 1994-11-23. 941.202. Retrieved 2013-01-01.
13. "RE: newRPL: Handling of units". HP Museum. 2016-05-11.
14. "Chapter 3: Units - Available Units - Angles". newRPL User Manual. 2018-10-25. Retrieved 2019-08-07.
15. "RE: WP-32S in 2016?". HP Museum. 2016-01-12. "[…] I'd like to see a TURN mode being implemented as well. TURN mode works exactly like DEG, RAD and GRAD (including having a full set of angle unit conversion functions like on the WP 34S), except for that a full circle doesn't equal 360 degree, 6.2831... rad or 400 gon, but 1 turn. (I […] found it to be really convenient in engineering/programming, where you often have to convert to/from other unit representations […] But I think it can also be useful for educational purposes. […]) Having the angle of a full circle normalized to 1 allows for easier conversions to/from a whole bunch of other angle units […]"
16. WP 43S Owner's Manual (draft ed.). 2019. pp. 72, 118–119, 311. ISBN 978-1-72950098-9. Retrieved 2019-08-05.  [1] [2] (314 pages)
17. WP 43S Reference Manual (draft ed.). 2019. pp. iii, 54, 97, 128, 144, 193, 195. ISBN 978-1-72950106-1. Retrieved 2019-08-05.  [3] [4] (271 pages)
18. "ooPIC Programmer's Guide - Chapter 15: URCP". ooPIC Manual & Technical Specifications - ooPIC Compiler Ver 6.0. Savage Innovations, LLC. 2007.
19. Sequence
20. (in la) Nova theoria lucis et colorum. Opuscula varii argumenti. 1746. pp. 169–244.
21. "Pi is Wrong". The Mathematical Intelligencer (New York, USA: Springer-Verlag) 23 (3): 7–8. 2001. doi:10.1007/bf03026846. Retrieved 2019-08-05.
22. "Integral Kinematics (Time-Integrals of Distance, Energy, etc.) and Integral Kinesiology". Proceedings of the 2014 IEEE GEM (Toronto, Ontario, Canada): 627–629. 22–24 October 2014. Retrieved 2023-07-18.
23. "Eye Itself as a Camera: Sensors, Integrity, and Trust". The 5th ACM Workshop on Wearable Systems and Applications: 1–2. June 2019. doi:10.1145/3325424.3330210. Retrieved 2023-07-18.
24. "The Tau Manifesto". 2019-03-14.
25. "Michael Hartl: It's time to kill off pi". New Scientist. Interview 209 (2794): 23. 2011-01-08. doi:10.1016/S0262-4079(11)60036-5. Bibcode2011NewSc.209...23A.
26. "On Pi Day, is 'pi' under attack?". cnn.com. CNN. 2011-03-14.
27. "Life of pi in no danger – Experts cold-shoulder campaign to replace with tau". Telegraph India. 2011-06-30. Retrieved 2019-08-05.
28. "For Math Fans, Nothing Can Spoil Pi Day—Except Maybe Tau Day" (in en-US). Wall Street Journal. 2020-03-13. ISSN 0099-9660.
29. "Happy Tau Day!" (in en-US). 2012-06-28.
30. "PEP 628 -- Add math.tau". Python.org. 2017-02-25.
31. "math — Mathematical functions". Python 3.7.0 documentation.
32. "TAU". Processing.
33. "Bounds on tail probabilities for negative binomial distributions". Kybernetika 52 (6): 943–966. 2017. doi:10.14736/kyb-2016-6-0943.
34. "My Conversion to Tauism". Math Horizons 19 (4): 34. April 2012. doi:10.4169/mathhorizons.19.4.34.
35. "ISO 80000-3:2006". 2001-08-31.

Lua error: Internal error: The interpreter exited with status 1.