Chemistry:Magnesium silicide

From HandWiki
Revision as of 01:29, 6 February 2024 by John Stpola (talk | contribs) (correction)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Magnesium silicide
Antifluorite Structure.jpg
Magnesium silicide.jpg
Names
Preferred IUPAC name
Magnesium silicide
Identifiers
3D model (JSmol)
ChemSpider
EC Number
  • 245-254-5
UNII
UN number 2624
Properties
Mg2Si
Molar mass 76.695 g·mol−1
Appearance Gray cubic crystals[1]
Density 1.99 g cm−3[1]
Melting point 1,102 °C (2,016 °F; 1,375 K)[1]
reacts[1]
Structure[2]
Antifluorite (cubic), cF12
Fm3m, #225
a = 0.6351 nm
4
Hazards
Main hazards reacts with water to produce pyrophoric silane
GHS pictograms GHS02: Flammable
GHS Signal word Warning
H261
P231+232, P280, P370+378, P402+404, P501
Related compounds
Other cations
Calcium silicide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☑Y verify (what is ☑Y☒N ?)
Infobox references

Magnesium silicide, Mg2Si, is an inorganic compound consisting of magnesium and silicon. As-grown Mg2Si usually forms black crystals; they are semiconductors with n-type conductivity and have potential applications in thermoelectric generators.[3]

Crystal structure

Mg2Si crystallizes in the antifluorite structure. In the face-centered cubic lattice Si centers occupy the corners and face-centered positions of the unit cell and Mg centers occupy eight tetrahedral sites in the interior of the unit cell. The coordination numbers of Si and Mg are eight and four, respectively.[2]

Synthesis

File:04. Добивање на аморфен силициум и магнезиум силицид.webm It can be produced by heating silicon dioxide, SiO2, found in sand, with excess magnesium. The process first forms silicon metal and magnesium oxide, and, if an excess of SiO2 is used, then elemental silicon is formed:

2 Mg + SiO2 → 2 MgO + Si

If an excess of Mg is present, Mg2Si is formed from the reaction of the remaining magnesium with the silicon:

2 Mg + Si → Mg2Si

These reactions proceed exothermically,[4] even explosively.[5]

Reactions

File:05. Реакција на магнезиум силицид во солна киселина.webm Magnesium silicide can be viewed as consisting of Si4− ions. As such it is reactive toward acids. Thus, when magnesium silicide is treated with hydrochloric acid, silane (SiH4) and magnesium chloride are produced:

Mg2Si + 4 HCl → SiH4 + 2 MgCl2

Sulfuric acid can be used as well. These protonolysis reactions are typical of a group 2 (alkaline earth metal) and group 1 (alkali metal) silicides. The early development of silicon hydrides relied on this reaction.[5]

Uses

Magnesium silicide is used to create aluminium alloys of the 6000 series, containing up to approximately 1.5% Mg2Si. An alloy of this group can be age-hardened to form Guinier-Preston zones and a very fine precipitate, both resulting in increased strength of the alloy.[6]

Magnesium silicide is a narrow-gap semiconductor. Its as-grown crystal exhibit n-type conductivity, but it can be changed to p-type by doping with Ag, Ga, Sn and possibly Li (at high doping level). The major potential electronic application of Mg2Si is in thermoelectric generators.[3][7]

References

  1. 1.0 1.1 1.2 1.3 Haynes, William M., ed (2011). CRC Handbook of Chemistry and Physics (92nd ed.). Boca Raton, FL: CRC Press. p. 4.74. ISBN 1439855110. 
  2. 2.0 2.1 Noda Y., Kon H., Furukawa Y., Otsuka N., Nishida I.A., Masumoto K. (1992). "Preparation and Thermoelectric Properties of Mg2Si1−xGex (x=0.0~0.4) Solid Solution Semiconductors". Mater. Trans., JIM 33 (9): 845–850. doi:10.2320/matertrans1989.33.845. https://www.jim.or.jp/journal/e/33/09/845.html. 
  3. 3.0 3.1 Hirayama, Naomi (2019). "Substitutional and interstitial impurity p-type doping of thermoelectric Mg2Si: a theoretical study". Sci. Technol. Adv. Mater. 20 (1): 160–172. doi:10.1080/14686996.2019.1580537. PMID 30891103. Bibcode2019STAdM..20..160H. open access
  4. Ehrlich, P. (1963) "Alkaline Earth Metals", p. 920 in Handbook of Preparative Inorganic Chemistry, 2nd ed., Vol. 1. G. Brauer (ed.). Academic Press, New York.
  5. 5.0 5.1 Stock, Alfred; Somieski, Carl (1916). "Siliciumwasserstoffe. I. Die aus Magnesiumsilicid und Säuren entstehenden Siliciumwasserstoffe". Berichte der Deutschen Chemischen Gesellschaft 49: 111–157. doi:10.1002/cber.19160490114. https://zenodo.org/record/1426597. 
  6. "Properties and Selection: Non-ferrous Alloys and Special Purpose Materials" in ASM Handbook, 10th ed., Vol. 1, 1990, ASM International, Materials Park, Ohio. ISBN 0871703785.
  7. Borisenko, Victor E. (2013). Semiconducting Silicides: Basics, Formation, Properties. Springer Science & Business Media. pp. 187, 287. ISBN 978-3-642-59649-0. https://books.google.com/books?id=F0zoCAAAQBAJ&pg=PA187.