Chemistry:Triethylborane

From HandWiki
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Triethylborane
Triethylborane
Ball-and-stick model of triethylborane
Names
Preferred IUPAC name
Triethylborane
Other names
Triethylborine, triethylboron
Identifiers
3D model (JSmol)
ChemSpider
EC Number
  • 202-620-9
UNII
Properties
(CH
3
CH
2
)
3
B
Molar mass 98.00 g/mol
Appearance Colorless liquid
Density 0.677 g/cm3
Melting point −93 °C (−135 °F; 180 K)
Boiling point 95 °C (203 °F; 368 K)
Not applicable; highly reactive
Hazards
Main hazards Spontaneously flammable in air; causes burns
Safety data sheet External SDS
GHS pictograms GHS02: FlammableGHS05: CorrosiveGHS06: ToxicGHS08: Health hazard
GHS Signal word Danger
H225, H250, H301, H314, H330, H360
P201, P202, P210, P222, P233, P240, P241, P242, P243, P260, P264, P270, P271, P280, P281, P284, P301+310, P301+330+331, P302+334, P303+361+353, P304+340, P305+351+338, P308+313, P310, P320
NFPA 704 (fire diamond)
Flammability code 4: Will rapidly or completely vaporize at normal atmospheric pressure and temperature, or is readily dispersed in air and will burn readily. Flash point below 23 °C (73 °F). E.g. propaneHealth code 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasReactivity code 4: Readily capable of detonation or explosive decomposition at normal temperatures and pressures. E.g. nitroglycerinSpecial hazard W: Reacts with water in an unusual or dangerous manner. E.g. sodium, sulfuric acidNFPA 704 four-colored diamond
4
3
4
Flash point < −20 °C (−4 °F; 253 K)
−20 °C (−4 °F; 253 K)
Related compounds
Related compounds
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☑Y verify (what is ☑Y☒N ?)
Infobox references

Triethylborane (TEB), also called triethylboron, is an organoborane (a compound with a B–C bond). It is a colorless pyrophoric liquid. Its chemical formula is (CH
3
CH
2
)
3
B
or (C
2
H
5
)
3
B
, abbreviated Et
3
B
. It is soluble in organic solvents tetrahydrofuran and hexane.

Preparation and structure

Triethylborane is prepared by the reaction of trimethyl borate with triethylaluminium:[1]

Et3Al + (MeO)3B → Et3B + (MeO)3Al

The molecule is monomeric, unlike H3B and Et3Al, which tend to dimerize. It has a planar BC3 core.[1]

Applications

Turbojet engine

Triethylborane was used to ignite the JP-7 fuel in the Pratt & Whitney J58 turbojet/ramjet engines powering the Lockheed SR-71 Blackbird[2] and its predecessor, the A-12 OXCART. Triethylborane is suitable because it ignites readily upon exposure to oxygen. It was chosen as an ignition method for reliability reasons, and in the case of the Blackbird, because JP-7 fuel has very low volatility and is difficult to ignite. Conventional ignition plugs posed a high risk of malfunction. Triethylborane was used to start each engine and to ignite the afterburners.[3]

Rocket

Mixed with 10–15% triethylaluminium, it was used before lift-off to ignite the F-1 engines on the Saturn V rocket.[4]

The Merlin engines that power the SpaceX Falcon 9 rocket use a triethylaluminium-triethylborane mixture (TEA-TEB) as a first- and second-stage ignitor.[5]

The Firefly Aerospace Alpha launch vehicle's Reaver engines are also ignited by a triethylaluminium-triethylborane mixture.[6]

Organic chemistry

Industrially, triethylborane is used as an initiator in radical reactions, where it is effective even at low temperatures.[1] As an initiator, it can replace some organotin compounds.

It reacts with metal enolates, yielding enoxytriethylborates that can be alkylated at the α-carbon atom of the ketone more selectively than in its absence. For example, the enolate from treating cyclohexanone with potassium hydride produces 2-allylcyclohexanone in 90% yield when triethylborane is present. Without it, the product mixture contains 43% of the mono-allylated product, 31% di-allylated cyclohexanones, and 28% unreacted starting material.[7] The choice of base and temperature influences whether the more or less stable enolate is produced, allowing control over the position of substituents. Starting from 2-methylcyclohexanone, reacting with potassium hydride and triethylborane in THF at room temperature leads to the more substituted (and more stable) enolate, whilst reaction at −78 °C with potassium hexamethyldisilazide, KN[Si(CH3)3]2 and triethylborane generates the less substituted (and less stable) enolate. After reaction with methyl iodide the former mixture gives 2,2-dimethylcyclohexanone in 90% yield while the latter produces 2,6-dimethylcyclohexanone in 93% yield.[7][8] The Et stands for ethyl group CH
3
CH
2
.

2-Methylcyclohexanone to 2,2- and 2,6-dimethylcyclohexanone.png

It is used in the Barton–McCombie deoxygenation reaction for deoxygenation of alcohols. In combination with lithium tri-tert-butoxyaluminum hydride it cleaves ethers. For example, THF is converted, after hydrolysis, to 1-butanol. It also promotes certain variants of the Reformatskii reaction.[9]

Triethylborane is the precursor to the reducing agents lithium triethylborohydride ("Superhydride") and sodium triethylborohydride.[10]

MH + Et3B → MBHEt3 (M = Li, Na)

Triethylborane reacts with methanol to form diethyl(methoxy)borane, which is used as the chelating agent in the Narasaka–Prasad reduction for the stereoselective generation of syn-1,3-diols from β-hydroxyketones.[11][12]

Safety

Triethylborane is strongly pyrophoric, with an autoignition temperature of −20 °C (−4 °F),[13] burning with an apple-green flame characteristic for boron compounds. Thus, it is typically handled and stored using air-free techniques. Triethylborane is also acutely toxic if swallowed, with an -1">50 of 235 mg/kg in rat test subjects.[14]

See also

  • Organoboranes
  • Pentaborane
  • Zip fuel

References

  1. 1.0 1.1 1.2 Brotherton, Robert J.; Weber, C. Joseph; Guibert, Clarence R.; Little, John L. (15 June 2000). "Boron Compounds". Ullmann's Encyclopedia of Industrial Chemistry. Wiley-VCH. doi:10.1002/14356007.a04_309. ISBN 3527306730. 
  2. "Lockheed SR-71 Blackbird". March Field Air Museum. Archived from the original on 2000-03-04. https://web.archive.org/web/20000304181849/http://www.marchfield.org/sr71a.htm. Retrieved 2009-05-05. 
  3. "Lockheed SR-71 Blackbird Flight Manual". www.sr-71.org. http://www.sr-71.org/blackbird/manual/1/1-22.php. Retrieved 2011-01-26. 
  4. A. Young (2008). The Saturn V F-1 Engine: Powering Apollo Into History. Springer. p. 86. ISBN 978-0-387-09629-2. 
  5. Mission Status Center, June 2, 2010, 1905 GMT , SpaceflightNow, accessed 2010-06-02, Quotation: "The flanges will link the rocket with ground storage tanks containing liquid oxygen, kerosene fuel, helium, gaseous nitrogen and the first stage ignitor source called triethylaluminum-triethylborane, better known as TEA-TEB."
  6. "https://twitter.com/Firefly_Space/status/1090319933534334977" (in en). https://twitter.com/Firefly_Space/status/1090319933534334977. 
  7. 7.0 7.1 Crich, David, ed (2008). "Enoxytriethylborates and Enoxydiethylboranes". Reagents for Radical and Radical Ion Chemistry. Handbook of Reagents for Organic Synthesis. 11. John Wiley & Sons. ISBN 9780470065365. https://books.google.com/books?id=JEcSmEKtoT4C&pg=PT1847. Retrieved 2019-01-27. 
  8. Negishi, Ei-ichi; Chatterjee, Sugata (1983). "Highly regioselective generation of "thermodynamic" enolates and their direct characterization by NMR". Tetrahedron Letters 24 (13): 1341–1344. doi:10.1016/S0040-4039(00)81651-2. 
  9. Yamamoto, Yoshinori; Yoshimitsu, Takehiko; Wood, John L.; Schacherer, Laura Nicole (15 March 2007). "Triethylborane". Encyclopedia of Reagents for Organic Synthesis. Wiley. doi:10.1002/047084289X.rt219.pub3. ISBN 978-0471936237. 
  10. Binger, P.; Köster, R. (1974). "Sodium triethylhydroborate, sodium tetraethylborate, and sodium triethyl-1-propynylborate". Inorganic Syntheses 15: 136–141. doi:10.1002/9780470132463.ch31. ISBN 9780470132463. 
  11. Chen, Kau-Ming; Gunderson, Karl G.; Hardtmann, Goetz E.; Prasad, Kapa; Repic, Oljan; Shapiro, Michael J. (1987). "A Novel Method for the In situ Generation of Alkoxydialkylboranes and Their Use in the Selective Preparation of 1,3-syn Diols". Chemistry Letters 16 (10): 1923–1926. doi:10.1246/cl.1987.1923. 
  12. Yang, Jaemoon (2008). "Diastereoselective Syn-Reduction of β-Hydroxy Ketones". Six-Membered Transition States in Organic Synthesis. John Wiley & Sons. pp. 151–155. ISBN 9780470199046. https://books.google.com/books?id=A_vUdr6ABGIC&pg=PA151. Retrieved 2019-01-27. 
  13. "Fuels and Chemicals - Autoignition Temperatures". http://www.engineeringtoolbox.com/fuels-ignition-temperatures-d_171.html. 
  14. "Archived copy". https://www.sigmaaldrich.com/MSDS/MSDS/DisplayMSDSPage.do?country=US&language=en&productNumber=257192&brand=ALDRICH&PageToGoToURL=https%3A%2F%2Fwww.sigmaaldrich.com%2Fcatalog%2Fproduct%2Faldrich%2F257192%3Flang%3Den.